E4889 netpal Quick Start Guide 15G06Q162100
1 Safety Precautions The following safety precautions will increase the life of the Disney Netpal. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel. Disconnect the AC power before cleaning. Wipe the Disney Netpal using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth. DO NOT place on uneven or unstable work surfaces.
Powering on your Disney Netpal These are only quick instructions for using your Disney Netpal. 1. Connect the AC power adapter 2. Turn ON the Disney Netpal 2 Damage may occur if you use a different adapter to power the Disney Netpal. You may damage both your battery pack(s) and the Disney Netpal with a faulty AC-DC adapter.
First-time Startup For the first time you start your Disney Netpal, the Windows wizard will launch automatically and lead you through setting up your preferences and some basic information. Follow the wizard instructions to finish the initialization: 1. The Welcome message appears. Click Next to continue. 2. Select your system settings by specifying the region you are in, the language you use and the keyboard type you use. Click Next to continue. 3.
4 Parental Control Disney Desktop helps you keep your child safe from inappropriate web content and applications. It allows you to configure how you want your child to use this Disney Netpal, including programs which they can and cannot use and a safe environment for your children when they go online. For service and support, visit our multi-language web site at http://support.asus.com. Setting the master password and creating an account 1.
5 Wireless network connection 1. Double-click the crossed wireless network icon Notification area. in the If the wireless connection icon does not show in the Notification area. Activate the wireless LAN function by pressing + ( + ) before configuring a wireless network connection. 2. Select the wireless access point you want to connect to from the list and click Connect to build the connection.
Wired network connection To establish a wired network, follow the instructions below: 6 Using a dynamic IP: 1. Right-click the network icon with a yellow warning triangle on the Windows® taskbar and select Open Network Connections. 2. Right-click Local Area Connection and select Properties. 3. Click Internet Protocol 4. (TCP/IP) and click Properties. Click Obtain an IP address automatically and click OK.
Using a static IP: 1. 2 3. 4. 5. Repeat the step 1–3 of Using a dynamic IP to start the static IP network configuration. Click Use the following IP address. Enter the IP address, Subnet mask and Gateway from your service provider. If needed, enter the preferred DNS Server address and alternative address. After entering all the related values, click OK to build the network connection. Contact your Internet Service Provider (ISP) if you have problems connecting to the network.
Connecting removable devices You can connect removable devices based on your needs. 1 1 8 2 Memory Card Slot MMC (Multimedia Card) MMC Plus RS-MMC (Reduced Size) (with MMC adapter) SD (Secure Digital) MiniSD (with SD adapter) microSD SD Adapter 2 USB Port (2.0/1.
WLAN Setup FAQ If you follow the instructions in the manual and fail to build a wireless network connection successfully, refer to the frequently asked questions below for quick solutions to your problems. For more information and advanced wireless network configuration, please visit http://livesupport. asus.com/eeewirelessxphowto.html. 9 Ensure that the wireless LAN function is enabled before configuring a wireless network connection. If not, press + to activate the wireless LAN function. 1.
