User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Information
- 2.1 Chassis cover
- 2.2 Air duct
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.5.1 Installing an E1.S module (optional)
- 2.5.2 Removing an E1.S module (optional)
- 2.5.3 Installing an external 2.5” storage device (on selected models)
- 2.5.4 Removing an external 2.5” storage device (on selected models)
- 2.5.5 Installing an internal 2.5” storage device (optional on selected models)
- 2.5.6 Removing an internal 2.5” storage device (optional on selected models)
- 2.6 Expansion slot
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Rail Kit Options
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 ACPI Settings
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 Onboard LAN Configuration
- 4.5.5 UEFI Variables Protection
- 4.5.6 Serial Port Console Redirection
- 4.5.7 SIO Configuration
- 4.5.8 PCI Subsystem Settings
- 4.5.9 USB Configuration
- 4.5.10` Network Stack Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 APM Configuration
- 4.5.13 Tls Auth Configuration
- 4.5.14 Intel(R) Virtual RAID on CPU
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Platform Configuration menu
- 4.7 Socket Configuration menu
- 4.8 Security menu
- 4.9 Boot menu
- 4.10 Tool menu
- 4.11 Event Logs menu
- 4.12 Server Mgmt menu
- 4.13 Exit menu
- Appendix
4-36
The following items appear only when Intel VT for Directed I/O is set to [Enable].
DMA Control Opt-In Flag [Disable]
Allows you to enable or disable DMA_CTRL_PLATFORM_OPT_IN_FLAG
in DMAR table in ACPI. Not compatible with Directive Device Assignment
(DDA).
Configuration options: [Enable] [Disable]
Pre-boot DMA Protection [Disable]
Allows you to enable or disable DMA Protection in Pre-boot environment (If
DMAR table is installed in DXE and if VTD_INFO_PPI is installed in PEI).
Configuration options: [Disable] [Enable]
4.7.6 Advanced Power Management Configuration
CPU P State Control
P State Control Configuration Sub Menus, including Turbo, XE, etc.
AVX License Pre-Grant Override [Disable]
Allows you to enable or disable AVX ICCP pre-grant level override.
Configuration options: [Disable] [Enable]
The following item appears only when AVX Licence Pre-Grant Override is set to
[Enable].
AVX ICCP pre-grant level [128 Heavy]
Pre-grants an AVX level to the core. Base frequency is not updated.
Configuration options: [128 Heavy] [256 Light] [256 Heavy] [512 Light] [512
Heavy]
The following items appear only when SpeedStep (Pstates) is set to [Enable].
AVX P1 [Nominal]
AVX P1 level selection.
Configuration options: [Nominal] [Level 1] [Level 2]
The following item appears only when Dynamic SST-PP is set to [Disable].
Intel SST-PP [Auto]
Intel SST-PP allows user to choose level. [Auto] will choose the lowest
level the hardware supports.
Configuration options: [Auto] [Level 0] [Level 3]