User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Onboard LAN Configuration
- 3.5.7 Serial Port Console Redirection
- 3.5.8 CPU Configuration
- 3.5.9 PCI Subsystem Settings
- 3.5.10 USB Configuration
- 3.5.11 Network Stack Configuration
- 3.5.12 CSM Configuration
- 3.5.13 NVMe Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Third-party UEFI driver configurations
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Exit menu
- Chapter 4: Driver Installation
- Appendix
Chapter 1: Product Introduction
1-6
1.5 Rear panel features
The expansion slots, system power socket, liquid cooler connectors (on selected models) are
located on the rear panel of the server. The right part includes the I/O shield with openings for
the rear panel connectors on the motherboard.
• The rear I/O ports do not appear on the rear panel if motherboard is not present.
• *The DM_LAN1 port is for ASUS ASMB10-iKVM controller only.
Air cooling solution
Liquid cooling solution
COM port
VGA port
Half-length / Low-profile expansion slots
Full-length expansion slot
(supports OCP 3.0 card using an OCP 3.0 slot baseboard)
LAN port 2
USB 3.2 Gen 1 ports
LAN port 1
DM_LAN1*
Location button with LED
Q-code/Port 80 LED
Power button with LED
Power sockets
COM port
VGA port
Half-length / Low-profile expansion slots
Liquid cooler connectors
LAN port 2
USB 3.2 Gen 1 ports
LAN port 1
DM_LAN1*
Location button with LED
Q-code/Port 80 LED
Power button with LED
Power sockets
Full-length expansion slot
(supports OCP 3.0 card using an OCP 3.0 slot baseboard)