User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Onboard LAN Configuration
- 3.5.7 Serial Port Console Redirection
- 3.5.8 CPU Configuration
- 3.5.9 PCI Subsystem Settings
- 3.5.10 USB Configuration
- 3.5.11 Network Stack Configuration
- 3.5.12 CSM Configuration
- 3.5.13 NVMe Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Third-party UEFI driver configurations
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Exit menu
- Chapter 4: Driver Installation
- Appendix
3-39
ASUS ESC N4A-E11
Aggressive SATA Device Sleep Port 1 [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Aggressive SATA Device Sleep Port 1 is set to
[Enabled].
DevSleep1 Port Number [0]
Allows you to set the DEVSLP port 1.
Configuration options: [0] - [7]
SATA Controller options
SATA Controller Enable
Sata0 Enable [Auto]
Allows you to enable or disable Sata0. Each IOD has 4 Sata
Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata1 Enable [Auto]
Allows you to enable or disable Sata1. Each IOD has 4 Sata
Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata2 Enable [Auto]
Allows you to enable or disable Sata2. Each IOD has 4 Sata
Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata3 Enable [Auto]
Allows you to enable or disable Sata3. Each IOD has 4 Sata
Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata4 (Socket1) Enable [Auto]
Allows you to enable or disable Sata4 on Socket 1 (IOD1). Each IOD
has 4 Sata Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata5 (Socket1) Enable [Auto]
Allows you to enable or disable Sata5 on Socket 1 (IOD1). Each IOD
has 4 Sata Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata6 (Socket1) Enable [Auto]
Allows you to enable or disable Sata6 on Socket 1 (IOD1). Each IOD
has 4 Sata Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
Sata7 (Socket1) Enable [Auto]
Allows you to enable or disable Sata7 on Socket 1 (IOD1). Each IOD
has 4 Sata Controllers.
Configuration options: [Disabled] [Enabled] [Auto]
SATA Controller eSATA