User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Onboard LAN Configuration
- 3.5.7 Serial Port Console Redirection
- 3.5.8 CPU Configuration
- 3.5.9 PCI Subsystem Settings
- 3.5.10 USB Configuration
- 3.5.11 Network Stack Configuration
- 3.5.12 CSM Configuration
- 3.5.13 NVMe Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Third-party UEFI driver configurations
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Exit menu
- Chapter 4: Driver Installation
- Appendix
3-40
Chapter 3: BIOS Setup
SATA Controller DevSlp
Socket1 DevSlp
Socket1 DevSlp0 Enable [Auto]
Only Sata0 on each IOD/socket supports DevSlp.
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Socket1 DevSlp0 Enable is set to [Enabled].
DevSleep0 Port Number [0]
Allows you to set DEVSLP port 0.
Configuration options: [0] - [7]
Socket1 DevSlp1 Enable [Auto]
Only Sata0 on each IOD/socket supports DevSlp.
Configuration options: [Disabled] [Enabled] [Auto]
The following item appears only when Socket1 DevSlp1 Enable is set to [Enabled].
DevSleep1 Port Number [1]
Allows you to set DEVSLP port 1.
Configuration options: [0] - [7]
SATA Controller SGPIO
Sata0 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata0.
Configuration options: [Disabled] [Enabled] [Auto]
Sata1 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata1.
Configuration options: [Disabled] [Enabled] [Auto]
Sata2 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata2.
Configuration options: [Disabled] [Enabled] [Auto]
Sata3 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata3.
Configuration options: [Disabled] [Enabled] [Auto]
Sata4 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata4.
Configuration options: [Disabled] [Enabled] [Auto]
Sata5 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata5.
Configuration options: [Disabled] [Enabled] [Auto]
Sata6 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata6.
Configuration options: [Disabled] [Enabled] [Auto]
Sata7 SGPIO [Auto]
Allows you to enable or disable SataSgpio on Sata7.
Configuration options: [Disabled] [Enabled] [Auto]