User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.2 Trusted Computing
- 4.5.2 PSP Firmware Versions
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 AMD CBS
- 4.5.5 APM Configuration
- 5.5.6 Onboard LAN Configuration
- 4.5.7 Serial Port Console Redirection
- 4.5.8 CPU Configuration
- 4.5.9 PCI Subsystem Settings
- 4.5.10 USB Configuration
- 4.5.11 Network Stack Configuration
- 4.5.12 CSM Configuration
- 4.5.13 NVMe Configuration
- 4.5.14 AMD Mem Configuration Status
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
Chapter 3: Installation Options
3-2
Rear of Enclosure
Cabinet Depth
Rear Mounting
Flange
Keep-out
Zone for Rail
Keep-out
Zone for Rail
CMA
Front of Enclosure Front Mounting Flange
2” for Handle
A
B
3.1 Rail Kit
The rail kit package includes:
2 x 1200 mm rack rails (or 2 x 1000 mm rack rails)
4 x M4X4L screws
8 x ø17.1 screws
8 x #10-32 screws
(or 10 x #10-32 screws for 1000 mm rack rails)
Rack
2 x M5X20L screws
Rear end
Front end
Rack rails
• The bundled screw package includes different types of screws for you to choose from,
not all screws are required for the installation.
• Packagecontentandspecicationsaresubjecttochangewithoutnotice.
Even without a CMA, another 9” (for 1200 mm rack rails) or 2” (for 1000 mm rack rails) of
additional keep-out zone should be reserved behind the inner rail. No obstructions such as
power cables or sockets should be present in this keep-out zone.
4 x #6-32X4L screws
3.1.1 Selecting rack rail cabinets
Refer to the guide below for more information on selecting a rack rail cabinet and rack rail for
your server system.
1200 mm rack rail with CMA
A = 700.3 mm (27.6”) ~ 965.5 mm (38”)
A + B > 1125 mm (44.3”)
1200 mm rack rail without CMA
A = 700.3 mm (27.6”) ~ 965.5 mm (38”)
A + B > 1025 mm (40.4”)
1000 mm rack rail without CMA
A = 685.7 mm (27”) ~ 916.5 mm (36”)
A + B > 835 mm (32.9”)