User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.2 Trusted Computing
- 4.5.2 PSP Firmware Versions
- 4.5.3 Redfish Host Interface Settings
- 4.5.4 AMD CBS
- 4.5.5 APM Configuration
- 5.5.6 Onboard LAN Configuration
- 4.5.7 Serial Port Console Redirection
- 4.5.8 CPU Configuration
- 4.5.9 PCI Subsystem Settings
- 4.5.10 USB Configuration
- 4.5.11 Network Stack Configuration
- 4.5.12 CSM Configuration
- 4.5.13 NVMe Configuration
- 4.5.14 AMD Mem Configuration Status
- 4.5.15 Third-party UEFI driver configurations
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
4-42
Chapter 4: BIOS Setup
The following items appear only when Socket-0 P0 NTB Enable is set to [Enabled].
Socket-0 P0 Start Lane [0]
Allows you to set the NTB Start Lane on Socket-0 P0 Link.
Configuration options: [0] - [15]
Socket-0 P0 End Lane [15]
Allows you to set the NTB End Lane on Socket-0 P0 Link.
Configuration options: [0] - [15]
Socket-0 P0 Link Speed [Auto]
Allows you to select the Link Speed for Socket-0 P0.
Configuration options: [Max Speed] [Gen 1] [Gen 2] [Gen 3] [Auto] [Gen 4]
Socket-0 P0 NTB Mode [Auto]
Allows you to select the NTB Mode for Socket-0 P0 Link.
Configuration options: [Auto] [NTB Disabled] [NTB Primary] [NTB Secondary]
Socket-0 P1 NTB Enable [Auto]
Allows you to enable NTB on Socket-0 P1 Link.
Configuration options: [Auto] [Enable]
The following items appear only when Socket-0 P1 NTB Enable is set to [Enabled].
Socket-0 P1 Start Lane [32]
Allows you to set the NTB Start Lane on Socket-0 P1 Link.
Configuration options: [32] - [47]
Socket-0 P1 End Lane [47]
Allows you to set the NTB End Lane on Socket-0 P1 Link.
Configuration options: [32] - [47]
Socket-0 P1 Link Speed [Auto]
Allows you to select the Link Speed for Socket-0 P1.
Configuration options: [Max Speed] [Gen 1] [Gen 2] [Gen 3] [Auto] [Gen 4]
Socket-0 P1 NTB Mode [Auto]
Allows you to select the NTB Mode for Socket-0 P1 Link.
Configuration options: [Auto] [NTB Disabled] [NTB Primary] [NTB Secondary]
Socket-0 P2 NTB Enable [Auto]
Allows you to enable NTB on Socket-0 P2 Link.
Configuration options: [Auto] [Enable]
The following items appear only when Socket-0 P2 NTB Enable is set to [Enabled].
Socket-0 P2 Start Lane [80]
Allows you to set the NTB Start Lane on Socket-0 P2 Link.
Configuration options: [80] - [95]