User's Manual
第四章:BIOS 程序設置
4-18
P-STATE Coordination [HW_ALL]
本項目提供您更改 P-STATE Coordination 類型。設置值有:[HW_ALL]
[SW_ALL] [SW_ANY]
CPU C3 Report [Disabled]
啟用或關閉 CPU C3(ACPI C2)回報功能。設置值有:[Disabled]
[Enabled]
CPU C6 Report [Enabled]
啟用或關閉 CPU C6(ACPI C3)回報功能。設置值有:[Disabled]
[Enabled]
CPU C7 Report [Disabled]
啟用或關閉 CPU C7(ACPI C3)回報功能。設置值有:[Disabled]
[Enabled]
Package C State limit [C6]
本項目為設置 Package C State limit。設置值有:[C0] [C2] [C6] [C7]
[No Limit]
Energy Performance [Balanced Performance]
本項目可以讓您有效地在最佳化性能與省電之間做選擇。設置值有:
[Performance] [Balanced Performance] [Balanced Energy] [Energy
Efficient]
Factory long duratiion power limit 95 Watts
Long duation power limit 0
提供您以瓦數為單為設置 long duration 電源限制。使用數字鍵來輸入想
要的數值。
Factory long duratiion maintained 10 s
Long duation power limit 0
提供您設置窗口以持續 long duration power。使用數字鍵來輸入想要的
數值。
Recommended short duration power1 1.2 * Long Duraton
Short duation power limit 0
提供您以瓦數為單位來設置 short duration power limit。使用 <+> 或 <->
鍵來調整想要的數值。