User's Manual

ASUS ESC2000 G2 5-37
5.4 Intel
®
Rapid Storage Technology
enterprise Utility (Windows)
The Intel
®
Rapid Storage Technology enterprise utility allows you to create RAID 0, RAID 1,
RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected
to the Serial ATA connectors supported by the Southbridge.
Before you using Intel
®
Rapid Storage Technology enterprise utility, you need to change BIOS
setting rst:
1. Enter the BIOS Setup during POST.
2. Go to the
AdvancedMenu>ChipsetConguration>PCHConguration>
Onboard SATA Oprom
, then press <Enter>.
3. Set
Onboard SATA Oprom
to [Enabled].
4. Press <F10> to save your changes and exit the BIOS Setup.
You can click Rescan to re-scan any attached hard disks.
1. Turn on the system to Windows desktop.
2. Click the
Intel
®
Rapid Storage Technology enterprise
icon to display the main menu.
To enter the Intel
®
Rapid Storage Technology enterprise utility under Windows operating
system:
You need to manually install the Intel
®
Rapid Storage Technology enterprise utility on a
Windows
®
operating system. Please refer to the installation instructions in Chapter 6.
Your storage system is congured for data protection, increased performance and
optimal data storage capacity. You can further optimize your storage system by creating
additional volumes.