User's Manual

2-19ASUS ESC2000 G2
2.8 Expansion cards
The system is designed with an expansion card lock on the rear panel for you to install or
remove an expansion card in less steps.
Ensure to unplug the power cord before installing or removing expansion cards. Failure to
do so may cause severe damage to the motherboard and other system components!
Slot
No.
Slot Description
1
PCI-E x16 (Gen3 x16/ x8 mode, auto-switch to x8 mode when slot 2 is occupied)
2
PCI-E x16 (Gen3 x8 mode)
3
PCI-E x16 (Gen3 x16/ x8 mode; auto-switch to x8 mode when slot 4 is occupied)
4
PCI-E x16 (Gen3 x8 mode)
5
PCI-E x16 (Gen3 x16 mode)
6
PCI-E x16 (Gen3 x8 mode)
7
PCI-E x16 (Gen3 x16 mode)
7