User's Manual

Chapter 3: Motherboard information3-20
4. EATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1/EATX12V2)
These connectors are for an EATX power supply plugs. The power supply plugs are
designed to t these connectors in only one orientation. Find the proper orientation and
push down rmly until the connectors completely t.
• DO NOT forget to connect the 24+8+8-pin power plugs; otherwise, the system will not
boot up.
• Use of a PSU with a higher power output is recommended when conguring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
• This motherboard supports EATX2.0 PSU or later version.
• Ensure that your power supply unit (PSU) can provide at least the minimum power
required by your system.