User's Manual

4-18 Chapter 4: BIOS setup
Turbo Mode [Enabled]
This item automatically allows processor cores to run faster than the base operating
frequency if it’s operating below power, current, and temperature specication limit.
Conguration options: [Disabled] [Enabled]
P-STATE Coordination [HW_ALL]
This item allows you to change P-STATE Coordination type.
Conguration options: [HW_ALL] [SW_ALL] [SW_ANY]
CPU C3 Report [Disabled]
This item allows you to enable/disable CPU C3(ACPI C2) report.
Conguration options: [Disabled] [Enabled]
CPU C6 Report [Enabled]
This item allows you to enable/disable CPU C6(ACPI C3) report.
Conguration options: [Disabled] [Enabled]
Power Technology [Custom]
This item allows you to enable power management features.
Conguration options: [Disable] [Energy Efcient] [Custom]
Enhanced Intel SpeedStep Technology [Enabled]
Enable Intel SpeedStep for allowing the system operation system to dynamically
adjust processor voltage and cores frequency to result in decreased average power
consumption and decreased average heat production.
Conguration options: [Disabled] [Enabled]
Turbo Mode [Enabled]
This item automatically allows processor cores to run faster than the base operating
frequency if it’s operating below power, current, and temperature specication limit.
Conguration options: [Disabled] [Enabled]
P-STATE Coordination [HW_ALL]
This item allows you to change P-STATE Coordination type.
Conguration options: [HW_ALL] [SW_ALL] [SW_ANY]
CPU C3 Report [Disabled]
This item allows you to enable/disable CPU C3(ACPI C2) report.
Conguration options: [Disabled] [Enabled]
CPU C6 Report [Enabled]
This item allows you to enable/disable CPU C6(ACPI C3) report.
Conguration options: [Disabled] [Enabled]