User Guide

Chapter 2: Hardware Setup
2-22
2.9 System fan
This section describes how to remove the system fan in the event that you need to install or
remove previously installed or new system components, or when the system fan needs to be
replaced because it was damaged or became defective.
To remove the system fan:
1. Disconnectthesystemfancablefrom
theCHA_FAN1connectoronthe
motherboard.
3. Remove the system fan.
2. Remove the four system fan screws at
therearpanel.Keepthescrewsforlater
use.
Hold the system fan with one hand
while removing the system fan
screws.
Followthepreviousinstructionsin
reverse order if you want to reinstall
the system fan.