User Manual
2-23
ASUS ESC4000 DHD G4
12. (for ASUS GPU cards only) Peel the mylar off from the bottom of the chassis (A), then
pry the metal cover on the chassis until it pops off (B).
Due to the design of ASUS GPU cards, the metal cover on bottom the chassis must be
removed to allow the ASUS GPU card to t properly inside the server system.
13. Align and insert the riser card and expansion card assembly into the PCI-E slot on
the motherboard (A), then secure the thumbscrew that secures the riser card to the
chassis. Ensure that the alignment standoff is aligned correctly with the riser card.
The expansion card ts in one orientation only.
Alignmentstandoff