User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-28
Chapter 5: BIOS Setup
Memory Error Enabling
Memory Error [Enable]
Allows you to enable or disable Memory Error.
Configuration options: [Disable] [Enable]
The following items appear only when
Memory Error
is set to
[Enable]
.
Memory Corrected Error [Enable]
Allows you to enable or disable Memory Corrected Error.
Configuration options: [Disable] [Enable]
The following item appears only when
Memory Corrected Error
is set to
[Enable]
.
Spare Interrupt [SMI]
Allows you to select Spare Interrupt.
Configuration options: [Disable] [SMI] [Error Pin] [CMCI]
PMem CTLR Errors [Enable]
Allows you to enable or disable PMem CTLR Error Reporting & Logging.
Configuration options: [Disable] [Enable]
PMem CTLR Low Priority Error Signaling [SMI]
Allows you to set the signaling for errors bucketed as Low Priority.
Configuration options: [Disable] [SMI] [ERR0# Pin]
PMem CTLR High Priority Error Signaling [SMI]
Allows you to set the signaling for errors bucketed as High Priority.
Configuration options: [Disable] [SMI] [ERR0# Pin]
Set PMem Address Range Scrub [Disable]
Allows you to enable or disable PMem DIMM Physical Address Range Scrub.
Configuration options: [Disable] [Enable]
Set PMem Host Alert Policy for Pat [Enable]
Allows you to enable or disable signaling DDRT interrupt upon receiving Uncorrectable
Error for PMem Patrol Scrub.
Configuration options: [Disable] [Enable]
Enable Reporting SPA to OS [Enable]
Allows you to enable or disable reporting SPA to OS. Only set to
[Disable]
for MCE
recovery validation.
Configuration options: [Disable] [Enable]
PMem UNC Poison [Enable]
Allows you to enable or disable PMem UNC Poison.
Configuration options: [Disable] [Enable]
Set PMem Host Alert Policy for DPA Error [Poison]
Allows you to configure to signal Poison or Viral upon receiving DIMM Physical Address
Error.
Configuration options: [Poison] [Viral]