User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-37
ASUS ESC4000-E10S
IOU3 (IIO PCie Port 4) [x16]
Allows you to select PCIe port Bifurcation for selected slot(s).
Configuration options: [Auto] [x4x4x4x4] [x4x4x8] [x8x4x4] [x8x8] [x16]
IOU4 (IIO PCie Port 5) [x16]
Allows you to select PCIe port Bifurcation for selected slot(s).
Configuration options: [Auto] [x4x4x4x4] [x4x4x8] [x8x4x4] [x8x8] [x16]
Enable PCI-E Completion Timeout (Per-Port) [No]
Allows you enable or disable the PCIe Completion Timeout in Device Control2 register.
Configuration options: [Yes] [No]
Sck0 RP Correctable Err [No]
Applies to root ports only. Allows you to enable or disable interrupt on correctable
errors.
Configuration options: [Yes] [No]
Sck0 RP NonFatal Uncorrectable Err [No]
Applies to root ports only. Allows you to enable or disable interrupt on a non-fatal error.
Configuration options: [Yes] [No]
Sck0 RP Fatal Uncorrectable Err [No]
Applies to root ports only. Allows you to enable or disable MSI/INTx interrupt on fatal
errors.
Configuration options: [Yes] [No]
TraceHub Configuration Menu
North Trace Hub Enable Mode [Disabled]
Select
[Host Debugger]
if Trace Hub is used with host debugger tool,
or select
[Target Debugger]
if Trace Hub is used by target debugger
software.
Configuration options: [Disabled] [Host Debugger] [Target Debugger]
The following items appear only when
North Trace Hub Enable Mode
is set to
[Host
Debugger]
or
[Target Debugger]
.
North TH Mem Buffer Size 0 [None/OS]
Select size of memory region 0 buffer. Choose
[None/OS]
if OS-supported
memory or trace fowarding is desired.
Configuration options: [None/OS] [1MB] [8MB] [64MB] [128MB] [256MB]
[512MB]
Limitation of total buffer size (PCH + CPU) is 512MB.
North TH Mem Buffer Size 1 [None/OS]
Select size of memory region 1 buffer. Choose
[None/OS]
if OS-supported
memory or trace fowarding is desired.
Configuration options: [None/OS] [1MB] [8MB] [64MB] [128MB] [256MB]
[512MB]
Limitation of total buffer size (PCH + CPU) is 512MB.