User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-40
Chapter 5: BIOS Setup
ECRC Check [Disable]
Allows you to enable or disable ECRC Check (Error Capabilities and
Control Register).
Configuration options: [Disable] [Enable]
SERRE [Disable]
Allows you to enable or disable SERRE (SERR Reporting Enable).
Configuration options: [Disable] [Enable]
IODC Configuration [KTI Option]
Allows you to enable or disable IODC (IO Direct Cache): Generate snoops
instead of memory lookups, for remote InvItoM (IIO) and/or WCiLF (cores).
Configuration options: [KTI Option] [Auto] [Enable for Remote InvItoM
Hybrid Push] [InvItoM AllocFlow] [Enable for Remote InvItoM Hybrid
AllocNonAlloc] [Enable for Remote InvItoM and Remove WViLF]
MCTP [Yes]
Allows you to enable or disable MCTP.
Configuration options: [No] [Yes]
Port 1A-5A
Settings related to PCI Express Ports (0/1A/1B/1C/1D/2A/2B/2C/2D/3A/3B/3C/3D/4A4
B/4C/4D/5A/5B/5C/5D)
PCI-E Port [Auto]
Allows you to enable or disable the port and expose/hide its CFG space. In
auto mode, the BIOS will remove the EXP port if there is no device or errors
on that device and that device is not HP capable.
Configuration options: [Auto] [Disable] [Enable]
The following items appear only when
PCI-E Port
is set to
[Auto]
or
[Enable]
.
Hot Plug Capable [Auto]
This option specifies if the link is considered Hot Plug capable.
Configuration options: [Auto] [Disable] [Enable]
Surprise Hot Plug Capable [Disable]
This option specifies if the link is considered Surprise Hot Plug capable.
Configuration options: [Disable] [Enable]
PCI-E Port Link Disable [No]
This option disabled the link so that the no training occurs but the CFG
space is still active.
Configuration options: [No] [Yes]
Link Speed [Auto]
Choose the Link Speed for this PCIe port.
Configuration options: [Auto] [Gen 1 (2.5 GT/s)] [Gen 2 (5 GT/s)] [Gen 3 (8
GT/s)]
Override Max Link Width [Auto]
Override the max link width that was set by bifurcation.
Configuration options: [Auto] [x1] [x2] [x4] [x8] [x16]