User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-41
ASUS ESC4000-E10S
The following item appears only when
Link Speed
is set to
[Auto]
,
[Gen 2 (5 GT/s)]
, or
[Gen
3 (8 GT/s)]
.
PCI-E Port DeEmphasis [-3.5 dB]
De-Emphasis control (LNKCON2 [6]) for this PCIe port.
Configuration options: [-6.0 dB] [-3.5 dB]
PCI-E Port Clocking [Common]
Configure port clocking via LNKCON [6]. This refers to this component and
the down stream component.
Configuration options: [Distinct] [Common]
PCI-E Port Clock Gating [Enable]
Allows you to enable or disable Clock Gating for this PCIe port.
Configuration options: [Disable] [Enable]
Data Link Feature Exchange [Enable]
Allows you to enable or disable data link feature negotiation in the Data
Link Feature Capabilities (DLFCAP) register.
Configuration options: [Disable] [Enable]
PCI-E Port MPSS [Auto]
Configure Max Payload Size Supported in PCIe Device Capabilities
register.
Configuration options: [128B] [256B] [512B] [Auto]
PCI-E Port D-state [D0]
Set to D0 for normal operation, D3Hot to bi in low-power state.
Configuration options: [D0] [D3Hot]
PCI-E ASPM Support [Disable]
Allows you to enable or disable ASPM (L1) support for the downstream
devices.
Configuration options: [Auto] [L1 Only] [Disable]
The following item appears only when
PCI-E ASPM Support
is set to
[Auto]
or
[L1 Only]
.
PCI-E Port L1 Exit Latency [8uS - 16uS]
The length of time this port requires to complete transition from L1 to L0.
Configuration options: [<1uS] [1uS - 2uS] [2uS - 4uS] [4uS - 8uS] [8uS -
16uS] [16uS - 32uS] [32uS - 64uS] [>64uS]
MSI [Disable]
Configuration options: [Disable] [Enable]
PCI-E Extended Sync [No]
Allows you to enable or disable the Extended Sync Mode (D:x F:0 0:7Ch B:7)
where x is 0-9.
Configuration options: [No] [Yes]
PCI-E Detect Wait Time [Auto]
Set PCIe port TxRx detect polling.
Configuration options: [Disable] [500ms] [Auto]
Compliance Mode [No]
Allows you to enable or disable Compliance Mode for this PCIe port.
Configuration options: [No] [Yes]
EOI [Disable]
Configuration options: [Disable] [Enable]