User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-42
Chapter 5: BIOS Setup
Fatal Err Over [No]
Allows you to enable or disable forcing fatal error propagation to the IIO
core error logic for this port.
Configuration options: [No] [Yes]
Non-Fatal Err Over [No]
Allows you to enable or disable forcing non-fatal error propagation to the
IIO core error logic for this port.
Configuration options: [No] [Yes]
Corr Err Over [No]
Allows you to enable or disable forcing correctable error propagation to the
IIO core error logic for this port.
Configuration options: [No] [Yes]
ACPI PME Interrupt [No]
Allows you to enable or disable ACPI PME Interrupts generation from this
port.
Configuration options: [No] [Yes]
P2P Memory Read [Enable]
Controls Peer2Peer Memory Read Decoding.
Configuration options: [Disable] [Enable]
PME to ACK [Enable]
Controls timeout usage for IIO waiting on PME_TO_ACK after a PME_
TURN_OFF message.
Configuration options: [Disable] [Enable]
PM ACPI Mode [No]
When enabled, _HPGPE message is generated, otherwise MSI is
generated on PM event.
Configuration options: [No] [Yes]
Unsupported Request [Disable]
Controls the reporting of unsupported requests that IIO itself detects on
requests its receives from a PCI Express/DMI port.
Configuration options: [Disable] [Enable]
Alternate TxEq [Disable]
Allows you to enable or disable TxEq.
Configuration options: [Disable] [Enable]
SRIS [Disable]
Allows you to enable or disable SRIS.
Configuration options: [Disable] [Enable]
ECRC Generation [Disable]
Allows you to enable or disable ECRC Generation (Error Capabilities and
Control Register).
Configuration options: [Disable] [Enable]
ECRC Check [Disable]
Allows you to enable or disable ECRC Check (Error Capabilities and
Control Register).
Configuration options: [Disable] [Enable]
SERRE [Disable]
Allows you to enable or disable SERRE (SERR Reporting Enable).
Configuration options: [Disable] [Enable]