User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-44
Chapter 5: BIOS Setup
CfgBar size [25]
Allows you to setup VMD Config BAR size (in bits Min=20, Max=27), e.g.
20bits=1MB, 27bits=128MB.
Configuration options: [20] - [27]
CfgBar attribute [64-bit prefetchable]
Allows you to setup VMD Config BAR attribute, like 64-bit or prefetchable.
Configuration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
MemBar1 size [25]
Allows you to setup VMD Memory BAR1 size (in bits Min=20), e.g.
20bits=1MB, 22bits=4MB, 26bits=64MB.
Configuration options: [20] - [39]
MemBar1 attribute [32-bit non-prefetchable]
Allows you to setup VMD Memory BAR1 attribute, like 64-bit or
prefetchable.
Configuration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
MemBar2 size [20]
Allows you to setup VMD Memory BAR2 size (in bits Min=20), e.g.
20bits=1MB, 22bits=4MB, 26bits=64MB.
Configuration options: [20] - [39]
MemBar2 attribute [64-bit non-prefetchable]
Allows you to setup VMD Memory BAR2 attribute, like 64-bit or
prefetchable.
Configuration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
VMD Config for IOU 0-4
Enable/Disable VMD [Disable]
Allows you to enable or disable VMD in this Stack.
The following items appear only when
Enable/Disable VMD
is set to
[Enable]
.
VMD Port A-D [Disable]
Allows you to enable or disable Intel® Volume Management Device
Technology on specific root port.
Configuration options: [Disable] [Enable]
Hot Plug Capable [Disable]
Allows you to enable or disable Hot Plug for PCIe Root Ports.
Configuration options: [Disable] [Enable]
CfgBar size [25]
Allows you to setup VMD Config BAR size (in bits Min=20, Max=27), e.g.
20bits=1MB, 27bits=128MB.
Configuration options: [20] - [27]
CfgBar attribute [64-bit prefetchable]
Allows you to setup VMD Config BAR attribute, like 64-bit or prefetchable.
Configuration options: [32-bit non-prefetchable] [64-bit non-prefetchable]
[64-bit prefetchable]
MemBar1 size [25]
Allows you to setup VMD Memory BAR1 size (in bits Min=20), e.g.
20bits=1MB, 22bits=4MB, 26bits=64MB.
Configuration options: [20] - [39]