User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- Chapter 3: Installation Options
- Chapter 4: Motherboard Infomation
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Advanced menu
- 5.4.1 OffBoard SATA Controller Configuration
- 5.4.2 Trusted Computing
- 5.4.3 ACPI Settings
- 5.4.4 Redfish Host Interface Settings
- 5.4.5 Onboard LAN Configuration
- 5.4.6 Serial Port Console Redirection
- 5.4.7 SIO Common Setting
- 5.4.8 SIO Configuration
- 5.4.9 PCI Subsystem Settings
- 5.4.10 USB Configuration
- 5.4.11 Network Stack Configuration
- 5.4.12 CSM (Compatibility Support Module)
- 5.4.13 NVMe Configuration
- 5.4.14 APM Configuration
- 5.4.15 Third-party UEFI driver configurations
- 5.5 Platform Configuration menu
- 5.6 Socket Configuration menu
- 5.7 Event Logs menu
- 5.8 Server Mgmt menu
- 5.9 Security menu
- 5.10 Boot menu
- 5.11 Tool menu
- 5.12 Save & Exit menu
- Chapter 6: Driver Installation
- Appendix
5-52
Chapter 5: BIOS Setup
AVX P1 [Normal]
AVX P1 level selection.
Configuration options: [Normal] [Level 1] [Level 2]
Activate SST-BF [Disable]
Allows you to enable or disable SST-BF.
Configuration options: [Disable] [Enable]
The following item appears only when
Activate SST-BF
is set to
[Enable]
.
Configure SST-BF [Enable]
Allows BIOS to configure SST-BF High Priority Cores so that SW does not have to
configure.
Configuration options: [Disable] [Enable]
EIST PSD Function [HW_ALL]
Configuration options: [HW_ALL] [SW_ALL]
Boot performance mode [Max Performance]
Allows you to select the performance state that the BIOS will set before OS hand off.
Configuration options: [Max Performance] [Max Efficient] [Set by Intel Node Manager]
Energy Efficient Turbo [Enable]
Allows you to enable or disable Energy Efficient Turbo.
Configuration options: [Disable] [Enable]
Turbo Mode [Enabled]
Allows you to enable or disable processor Turbo Mode (requires EMTTM enabled as
well).
Configuration options: [Disable] [Enable]
CPU Flex Ratio Override [Disable]
Allows you to enable or disable CPU Flex Ratio Programming.
Configuration options: [Disable] [Enable]
CPU Flex Ratio [23]
Non-Turbo Mode Processor Core Ratio Multiplier.
Configuration options: [0] - [100]
GPSS timer [500 us]
P-state changes hysteresis time window.
Configuration options: [0 us] [50 us] [500 us]
Perf P-Limit
Perf P-Limit Differential [1]
Parameter used to tune how far below local socket frequency remote
socket frequency is allowed to be. Also impacts rate at which frequency
drops when feature disengages.
Perf P-Limit Clip [1F]
Maximum value the floor is allowed to be set to for perf P-Limit.
Perf P-Limit Threshold [F]
Uncore frequency threshold above which this socket will trigger the feature
and start trying to raise frequency of other sockets.