User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Central Processing Unit (CPU)
- 2.3 System memory
- 2.4 Storage devices
- 2.5 Expansion slots
- 2.5.1 The PCI Express riser card
- 2.5.2 Installing an ASUS PIKE II card
- 2.5.3 Reconnecting the cable to the M.2 expansion board (only for SKU-3)
- 2.5.4 Installing an M.2 (NGFF) card
- 2.5.5 Reconnecting the cable to the OCP 3.0 slot baseboard (only for SKU-2)
- 2.5.6 (optional) Installing the PFR module
- 2.5.7 Configuring an expansion card
- 2.6 Cable connections
- 2.7 SATA/SAS backplane cabling
- 2.8 Removable/optional components
- 2.9 Rail Kit Options
- Chapter 3: Motherboard Infomation
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Advanced menu
- 4.4.1 OffBoard SATA Controller Configuration
- 4.4.2 Trusted Computing
- 4.4.3 ACPI Settings
- 4.4.4 Redfish Host Interface Settings
- 4.4.5 Onboard LAN Configuration
- 4.4.6 Serial Port Console Redirection
- 4.4.7 SIO Common Setting
- 4.4.8 SIO Configuration
- 4.4.9 PCI Subsystem Settings
- 4.4.10 USB Configuration
- 4.4.11 Network Stack Configuration
- 4.4.12 CSM (Compatibility Support Module)
- 4.4.13 NVMe Configuration
- 4.4.14 APM Configuration
- 4.4.15 Third-party UEFI driver configurations
- 4.5 Platform Configuration menu
- 4.6 Socket Configuration menu
- 4.7 Event Logs menu
- 4.8 Server Mgmt menu
- 4.9 Security menu
- 4.10 Boot menu
- 4.11 Tool menu
- 4.12 Save & Exit menu
- Chapter 5: Driver Installation
- Appendix
4-55
ASUS ESC4000-E10S
CPU - Advanced PM Tuning
Energy Perf BIAS
Power Performance Tuning [OS Controls EPB]
Configuration options: [OS Controls EPB] [BIOS Controls EPB] [PECI
Controls EPB]
The following item appears only when
Power Performance Tuning
is set to
[OS Controls
EPB]
or
[PECI Controls EPB]
.
PECI CPS EPB [OS controls EPB]
Controls whether PECI has control over EPB.
Configuration options: [OS Controls EPB] [PECI Controls EPB using PCS]
The following item appears only when
Power Performance Tuning
is set to
[BIOS
Controls EPB]
.
ENERGY_PERF_BIAS_CFG mode [Balanced Performance]
Configuration options: [Performance] [Balanced Performance] [Balanced
Power] [Power]
Dynamic Loadline Switch [Enable]
Configuration options: [Disable] [Enable]
Workload Configuration [Balanced]
This allows optimization for the workload characterization.
Configuration options: [Balanced] [I/O Sensitive]
Averaging Time Window [1A]
This is used to control the effective window of the average for C0 and P0
time.
P0 TotalTimeThreshold Low [28]
This is used to control the effective window of the average for C0 and P0
time.
P0 TotalTimeThreshold High [3F]
This is used to control the effective window of the average for C0 and P0
time.
SAPM Control [Enable]
Configuration options: [Enable] [Disable]
EET Mode [Coarse Grained Mode]
[Coarse Grained Mode] Decides whether to grant user request turbo on P1.
[Fine Grained Mode] Decides how much turbo to be granted.