User Manual

6-22
Chapter 6: RAID conguration
6.2.7 Selecting the boot drive from a RAID set
You must have created a new RAID conguration before you can select the boot drive from a
RAID set. See section 6.2.1 Creating a RAID set: Using New Conguration for details.
To select the boot drive from a RAID set
1. From the Management Menu, select Congure > Select Boot Drive, and then press
<Enter>.
2. When prompted, use the arrow keys to select the bootable virtual drive from the list,
then press <Enter>.
3. The virtual drive is selected as boot drive. Press any key to continue.
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version A.10.09231523R
Select A Boot VD
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Configuration Menu
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version A.10.09231523R
Select A Boot VD
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Configuration Menu
Boot Drive 0
Bootable VDs(1): Current Boot VD(0)