User Manual

6-24

Chapter 6: RAID conguration

6.3 Intel

Rapid Storage Technology enterprise SCU/

SATA Option ROM Utility

The Intel

Rapid Storage Technology enterprise SCU / SATA Option ROM utility allows you

to create RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk

drives that are connected to the Serial ATA connectors supported by the Southbridge.

You can create RAID mode by use of onboard AHCI SATA ports. Also, when installed

optional ASRK module, you can use onboard scu SAS ports to create RAID mode.

To use onboard SATA ports:

1. Install all the Serial ATA hard disk drives.

2. Turning on the system. During POST, press,Del. to enter BIOS. Go to

Advanced

PCH SATA Configuration

SATA Mode

, then press <Enter>.

3. Set

SATA Mode

RAID Mode

and save, then reboot system.

4. During POST, press <Ctrl+I> to display the utility main menu.

To use SCU SATA ports:

1. Install all the SATA hard disk drives.

2. Turning on the system. During POST, press <Del> to enter BIOS. Go to

Advanced

PCH SCU SAS Configuration

, then press <Enter>.

3. Conrm all the SAS hard disk drives you installed are correctly displayed, then reboot

system.

4. During POST, press <Ctrl+I> to display the utility main menu.