User Guide

6-6
Chapter 6: RAID Conguration
3. SelectallthedrivesrequiredfortheRAIDset,andthenpress<F10>tocongurearray
setting.
4. Press<Space>toselectthecongurablearray.
2. TheARRAYSELECTIONMENUdisplaystheavailabledrivesconnectedtotheSATA
ports.Usetheup/downarrowkeystoselectthedrivesyouwanttoincludeintheRAID
set,andthenpress<Space>.Whenselected,thedriveindicatorchangesfromREADY
toONLINA[X]-[Y],whereXisthearraynumber,andYisthedrivenumber.
• Theinformationoftheselectedharddiskdrivedisplaysatthebottomofthescreen.
• YouneedatleasttwoidenticalharddiskdriveswhencreatingaRAID1set.
• YouneedatleastfouridenticalharddiskdriveswhencreatingaRAID10set.
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version A.10.09231523R
Port # 2 DISK 74.74GB HDS728080PLA380 05.01C05
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration - ARRAY SELECTION MENU
ONLIN A00-00
ONLIN A00-01
READY
READY
0
1
2
3
PORT #
Cursor Keys, SPACE-(De)Select F2-Chidinfo F3-SlotInfo F10-Configure Esc-Quit
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version A.10.09231523R
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration - ARRAY SELECTION MENU
ONLIN A00-00
ONLIN A00-01
READY
READY
0
1
2
3
PORT #
Select Configurable Array(s)
A-0
SPAN-1