User's Manual

6-20
Chapter 6: RAID conguration
Using the Objects command
TocheckdataconsistencyusingtheObjectscommand:
1. FromtheManagementMenu,selectObjects,andthenselectVirtualDrivefromthe
sub-menu.
2. Usethearrowkeystoselectthevirtualdriveyouwanttocheck,andthenpress
<Enter>.
3. SelectCheckConsistencyfromthepop-upmenu,andthenpress<Enter>.
4. Whenprompted,usethearrowkeystoselectYesfromthedialogboxtocheckthe
drive.
5. Whencheckingiscomplete,pressanykeytocontinue.