User's Manual

2-31
ASUS ESC4000 G3/G3S Series
Nvidia 300W GPU card
opening on the bracket
air duct
dongle
GPU power cable
8. Get the bracket and place it on a at and stable surface.
9. Remove the screws on the metal covers (A) then remove the metal covers (B).
For Nvidia 300W or above GPU cards, connect a GPU power cable to the conenctor on
the dongle.
10. Insert the GPU cables into the opening on the bracket.
11. Align and insert the golden ngers of the accelerator into the card slot on the bracket.
Ensure the card is completely seated on the slot.
12. Secure the rear end of the accelerator to the bracket with two screws.
13. Secure the air duct and accelerator assembly with a screw.