User Manual

Chapter 2: Hardware setup2-14

2.6 Cable connections

• The bundled system cables are pre-connected before shipment. You do

not need to disconnect these cables unless you will remove pre-installed

components to install additional devices.

• Refer to Chapter 4 for detailed information on the connectors.

Pre-connected system cables

1. 20-pin SSI power connector (from power supply to motherboard)

2. 8-pin SSI power connector (from power supply to motherboard)

3. Power supply SMBus connector (from power supply to motherboard)

4. System fan connectors (from motherboard FRNT_FAN1, FRNT_FAN2

FRNT_FAN3, FRNT_FAN4, and FRNT_FAN5 to system fans)

5. USB connector (from motherboard to front I/O board)

6. Auxiliary Panel connector (from motherboard to front I/O board)

7. Panel connector (from motherboard to front I/O board)

8. SATA connectors (from motherboard to SATAII/SAS backplane board)

9. SGPIO1 connector (from motherboard to SATAII/SAS backplane board)