User Manual

華碩 ESC4000A-E10 用戶手冊
5-39
Aggressor Static Lane Select Upper 32 bits [0]
設置值有：[0] - [99999999]
Aggressor Static Lane Select Lower 32 bits [0]
設置值有：[0] - [99999999]
Aggressor Static Lane Select ECC [0]
設置值有：[0] - [9]
Aggressor Static Lane Value [0]
設置值有：[0] - [9]
Target Static Lane Control [Disabled]
設置值有：[Disabled] [Enabled]
以下的項目僅當 Target Static Lane Control 設置為 [Enabled] 時才會顯
示。
Target Static Lane Select Upper 32 bits [0]
設置值有：[0] - [99999999]
Target Static Lane Select Lower 32 bits [0]
設置值有：[0] - [99999999]
Target Static Lane Select ECC [0]
設置值有：[0] - [9]
Target Static Lane Value [0]
設置值有：[0] - [9]
Data Eye Type [Worst Case Margin Only]
設置值有：[1D Voltage Sweep] [1D Timing Sweep] [2D Full Data Eye]
[Worst Case Margin Only]
Worst Case Margin Granularity [Per Chip Select]
設置值有：[Per Chip Select] [Per Nibble]
Read Voltage Sweep Step Size [2]
設置值有：[1] [2] [4]
Read Timing Sweep Step Size [1]
設置值有：[1] [2] [4]
Write Voltage Sweep Step Size [2]
設置值有：[1] [2] [4]
Write Timing Sweep Step Size [1]
設置值有：[1] [2] [4]