User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 Trusted Computing
- 5.5.2 PSP Firmware Versions
- 5.5.3 APM Configuration
- 5.5.4 Onboard LAN Configuration
- 5.5.5 Serial Port Console Redirection
- 5.5.6 CPU Configuration
- 5.5.7 PCI Subsystem Settings
- 5.5.8 USB Configuration
- 5.5.9 Network Stack Configuration
- 5.5.10 CSM Configuration
- 5.5.11 NVMe Configuration
- 5.5.12 SATA Configuration
- 5.5.13 AMD Mem Configuration Status
- 5.6 Chipset menu
- 5.7 Security menu
- 5.8 Boot menu
- 5.9 Tool menu
- 5.10 Event Logs menu
- 5.11 Server Mgmt menu
- 5.12 Exit menu
- Chapter 6: Driver Installation
- Appendix
ASUS ESC4000A-E11
1-3
1.3 System specifications
The ASUS ESC4000A-E11 Series servers features the ASUS KMPG-U8 server board that
supports AMD EPYC™ 7003/7002 Series Processor Family.
(continued on the next page)
Model Name ESC4000A-E11
Processor
AMD EPYC™ 7003/7002 Series Processor Family
(up to TDP 280W)
Memory
Total Slots
8 (8-channel per CPU, 8 DIMM per CPU)
Capacity
Up to 2048GB
Memory Type
DDR4 3200 RDIMM
* Please refer to www.asus.com for latest memory AVL update
Memory Size
128GB, 64GB, 32GB, 16GB (RDIMM)
* Please refer to ASUS server AVL for the latest update
Expansion
Slots
Total PCI/PCI-X/
PCI-E Slots
11
Slot Type
Full-length/Full-height:
4 x PCIe 4.0 x16 link for double-deck GPU cards or
8 x PCIe 4.0 x16 link with PLX SKU Board for
single-deck GPU cards
Rear (x32 link):
2 x PCIe 4.0 x16 slot for butterfly riser card (LP, HL)
Front (x8 link):
1 x PCIe 4.0 x8 slot for internal HBA/RAID card or
1 x OCP3.0 slot for Mezzanine slot or
2 x Hyper M.2 Card (max. 22110)
* Front riser, OCP3.0, and M.2 card use the same x8 link
Storage
SATA Controller
8 x SATA 6Gb/s ports
SAS Controller
Optional Kits:
ASUS PIKE II 3008 8-port SAS HBA card
ASUS PIKE II 3108 8-port SAS HW RAID card
Supports SAS 12Gbps
Storage
Bays
Storage Bay
8 x 2.5" or 3.5" Hot-swap Storage Device Bays
(2 x NVMe as default; up to 4 x NVMe/SATA/SAS +
4 x SATA/SAS supported)
* SAS from optional ASUS PIKE II 3108/30008 cards
Backplane
connectors
2 x Mini SAS HD + 8 xSlimline SAS at 4x link
MB on-board
connectors
1 x M.2 connector
2 x Mini SAS HD
2 x Slimline SAS at x8 link
Default Cable
Backplane default cable:
2 x Mini SAS HD Cable
2 x Slimline SAS Cable
NVMe upgrade
option
2-port NVMe upgrade kit (1 x riser card + 2 x cables)
Networking
2 x 1Gb/s LAN ports (Intel
®
I350-AM2)
1 x Dedicated management port
VGA
AST2600 64MB