User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Performance Tuning menu
- 5.5 Advanced menu
- 5.5.1 Trusted Computing
- 5.5.2 PSP Firmware Versions
- 5.5.3 APM Configuration
- 5.5.4 Onboard LAN Configuration
- 5.5.5 Serial Port Console Redirection
- 5.5.6 CPU Configuration
- 5.5.7 PCI Subsystem Settings
- 5.5.8 USB Configuration
- 5.5.9 Network Stack Configuration
- 5.5.10 CSM Configuration
- 5.5.11 NVMe Configuration
- 5.5.12 SATA Configuration
- 5.5.13 AMD Mem Configuration Status
- 5.6 Chipset menu
- 5.7 Security menu
- 5.8 Boot menu
- 5.9 Tool menu
- 5.10 Event Logs menu
- 5.11 Server Mgmt menu
- 5.12 Exit menu
- Chapter 6: Driver Installation
- Appendix
3-8
Chapter 3: Installation Options
ESC4000A-E11 Front View
1
2
12. Once the server system is completely installed onto the rack rails, you can push or pull
on the server system a few times to ensure the sliding operation is smooth and that the
server system is properly installed into the rail racks. Secure the server system to the
rack using the bundled screws.
If the server system was not installed properly into the rack rail, it will be difficult to push
and pull on the server system, and it will also be difficult to align the screw holes used to
secure the server system to the rack.
13. For more information on the installation of the rack rails, you can refer to the manual
bundled with the rack rails.