User Manual
Table Of Contents
- 目录
- 使用注意事项
- 用电安全
- 关于本用户手册
- 第一章:系统导览
- 第二章:硬件安装
- 第三章:主板信息
- 第四章:BIOS 程序设置
- 4.1 管理、更新您的 BIOS 程序
- 4.2 BIOS 程序设置
- 4.3 主菜单(Main)
- 4.4 性能调整菜单(Performance Tuning menu)
- 4.5 高级菜单(Advanced menu)
- 4.5.1 可信任计算(Trusted Computing)
- 4.5.2 AMD CBS
- 4.5.3 内置网络设置(Onboard LAN Configuration)
- 4.5.4 串口控制面板重新定向(Serial Port Console Redirection)
- 4.5.5 CPU 设置(CPU Configuration)
- 4.5.6 PCI 子系统设置(PCI Subsystem Settings)
- 4.5.7 USB 设置(USB Configuration)
- 4.5.8 网络协定堆栈设置(Network Stack Configuration)
- 4.5.9 NVMe 设置(NVMe Configuration)
- 4.5.10 SATA 设置(SATA Configuration)
- 4.5.11 APM 设置(APM Configuration)
- 4.5.12 AMD 内存设置状态(AMD Mem Configuration Status)
- 4.5.13 T1s Auth
- 4.5.14 驱动程序状态(Driver Health)
- 4.6 芯片菜单(Chipset menu)
- 4.7 安全性菜单(Security menu)
- 4.8 启动菜单(Boot menu)
- 4.9 工具菜单(Tool menu)
- 4.10 事件记录菜单(Event Logs menu)
- 4.11 服务器管理菜单(Server Mgmt menu)
- 4.12 退出 BIOS 程序(Exit menu)
- 第五章:安装驱动程序
- 附录
第四章:BIOS 程序設置
4-12
MCA Error Threshold Enable [Auto]
設置值有:[False] [True] [Auto]
MCA FruText [Auto]
設置值有:[False] [True]
SMU and PSP Debug Mode [Auto]
本項目設置為 [Enabled] 時,PSP 固件或 SMU 固件檢測到不可修正錯誤時會
假死機而非重啟系統。設置值有:[Disabled] [Enabled] [Auto]
PPIN Opt-in [Auto]
設置值有:[Disabled] [Enabled] [Auto]
SNP Memory (RMP Table) Coverage [Auto]
設置值有:[Disabled] [Enabled] [Custom] [Auto]
以下項目只有在 SNP Memory (RMP Table) Coverage 設為[Custom] 時
才會出現。
Amount of Memory to Cover [0]
本項目可以十六進位指定主板的系統內存。
Secure Memory Encryption Enable (SMEE) [Auto]
設置值有:[Disabled] [Enabled] [Auto]
Action on BIST Failure [Auto]
本項目用來設置當檢測到 CCD BIST 錯誤時的動作。設置值有:[Do nothing]
[Down-CCD] [Auto]
Fast Short REP MOVSB (FSRM) [Auto]
設置值有:[Disabled] [Enabled] [Auto]
Enhanced Short REP MOVSB (ESRM) [Auto]
設置值有:[Disabled] [Enabled] [Auto]
Log Transparent Errors [Auto]
設置值有:[Disabled] [Enabled] [Auto]
AVX512 [Auto]
設置值有:[Disabled] [Enabled] [Auto]
MONITOR and MWAIT Disable [Auto]
啟用本項目時,MONITOR、MWAIT、MONITORX 與 MWAITX 運算碼將無
效。設置值有:[Disabled] [Enabled] [Auto]
DF Common Options
Memory Addressing
本項目可以設置內存地址。
ACPI
本項目可以設置 ACPI 功能。