User Guide
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 CPU installation
- 2.3 CPU heatsink and fan assembly installation
- 2.4 System memory
- 2.5 Assembly module
- 2.6 5.25-inch drive
- 2.7 Card reader
- 2.8 Hard disk drives (HDD)
- 2.9 Expansion slots
- 2.10 System fan
- 2.11 BIOS update utility
- 2.12 Motherboard rear and audio connection
- 2.13 Starting up for the first time
- 2.14 Turning off the computer
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- Chapter 5: RAID Configuration
- Appendix
4-12
Chapter 4: BIOS Setup
System Agent (SA) Configuration
Allows you to set System Agent (SA) parameters.
VT-d [Enabled]
Allows you to enable virtualization technology function on memory control hub.
Congurationoptions:[Disabled][Enabled]
Above 4GB MMIO BIOS assignment [Disabled]
Allowsyoutoenableordisableabove4GBMemoryMappedIOBIOSassignment.When
aperture size is set to 2048 MB, this is disabled automatically.
Congurationoptions:[Enabled][Disabled]
Graphics Configuration
Allows you to select a primary display from graphical devices.
Internal Graphics [Enabled]
ThisoptionallowsyoutokeepIGFXenabledbasedonthesetupoptions.
Congurationoptions:[Auto][Disabled][Enabled]
Hyper-V DDA [Disabled]
ThisoptionallowsyoutoenableordisabletheWindowsServer2016Hyper-VDiscrete
Device Assignment for Intel Graphics.
Congurationoptions:[Disabled][Enabled]