User Manual
Table Of Contents
- 目錄
- 使用注意事項
- 用電安全
- 關於本使用手冊
- 第一章:系統導覽
- 第二章:硬體安裝
- 第三章:主機板資訊
- 第四章:BIOS 程式設定
- 4.1 管理、更新您的 BIOS 程式
- 4.2 BIOS 程式設定
- 4.3 主選單(Main)
- 4.4 效能調整選單(Performance Tuning menu)
- 4.5 進階選單(Advanced menu)
- 4.5.1 可信任計算(Trusted Computing)
- 4.5.2 ACPI 設定(ACPI Settings)
- 4.5.3 Redfish Host 介面設定(Redfish Host Interface Settings)
- 4.5.4 內建網路設置(Onboard LAN Configuration)
- 4.5.5 序列埠控制台重新導向(Serial Port Console Redirection)
- 4.5.6 SIO 設定(SIO Configuration)
- 4.5.7 PCI 子系統設定(PCI Subsystem Settings)
- 4.5.8 USB 設定(USB Configuration)
- 4.5.9 網路協定堆疊設定(Network Stack Configuration)
- 4.5.10 NVMe 設定(NVMe Configuration)
- 4.5.11 進階電源管理設定(APM Configuration)
- 4.5.12 T1s Auth 設定(T1s Auth Configuration)
- 4.5.13 第三方 UEFI 驅動程式設定
- 4.6 平台設定選單(Platform Configuration menu)
- 4.7 插槽設定選單(Socket Configuration menu)
- 4.8 安全性選單(Security menu)
- 4.9 開機選單(Boot menu)
- 4.10 工具選單(Tool menu)
- 4.11 事件記錄選單(Event Logs menu)
- 4.12 伺服器管理選單(Server Mgmt menu)
- 4.13 離開 BIOS 程式(Save & Exit menu)
- 第五章:磁碟陣列設定
- 附錄
華碩 ESC8000-E11P 使用手冊
4-43
4.12.1 系統事件記錄(System Event Log)
提供您變更 SEL 事件記錄設定。
SEL Components [Enabled]
本項目用來啟用或關閉開機自我檢測時錯誤或進度代碼的事件記錄。
設定值有:[Disabled] [Enabled]
以下項目只有在 SEL Enable 設為 [Enabled] 時才會出現。
Erase SEL [No]
本項目用來選擇如何清除 SEL。
設定值有:[No] [Yes, On next reset] [Yes, On every reset]
4.12.2 華碩 FRU 資訊(ASUS FRU Information)
本項目可以檢視 FRU 資訊。
4.12.3 BMC 網路設定(BMC network configuration)
此選單中的選項用來設定 BMC 網路參數。
DM_LAN/Shared LAN
Configuration Address source [Unspecified]
設定值有:[Unspecified] [Static] [DynamicBmcDhcp]
IPv6 Support [Enabled]
設定值有:[Enabled] [Disabled]
以下項目只有在 IPv6 Support 設為 [Enabled] 時才會出現。
Configuration Address source [Unspecified]
設定值有:[Unspecified] [Static] [DynamicBmcDhcp]
Configuration Router Lan1/Lan2 Address source [Unspecified]
設定值有:[Unspecified] [Static] [DynamicBmcDhcp]
4.12.4 檢視系統事件記錄(View System Event Log)
本選單可以檢視系統事件記錄。