User Guide

ASUS ESC8000 G3
6-27
6.3.2 Creating a Recovery set
To create a recovery set:
1. Fromtheutilitymainmenu,select
1. Create RAID Volume
andpress<Enter>.The
following screen appears.
[ CREATE VOLUME MENU ]
[ HELP ]
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Intel(R) Rapid Storage Technology enterprise - SCU Option ROM - 3.0.0.1104
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
6. Usetheup/downarrowkeystoselectthestripesizefortheRAIDarray(forRAID0,
10and5only)thenpress<Enter>.Theavailablestripesizevaluesrangefrom4KBto
128KB.Thefollowingaretypicalvalues:
RAID0:128KB
RAID10:64KB
RAID5:64KB
Werecommendalowerstripesizeforserversystems,andahigherstripesizefor
multimedia computer systems used mainly for audio and video editing.
7. IntheCapacityelditem,keyintheRAIDvolumecapacitythatyouwanttouseand
press<Enter>.Thedefaultvalueeldindicatesthemaximumallowedcapacity.
8. Press<Enter>tostartcreatingtheRAIDvolume.
9. Fromthefollowingwarningmessage,press<Y>tocreatetheRAIDvolumeandreturn
tothemainmenu,orpress<N>togobacktotheCREATEVOLUMEmenu.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Sync: N/A
Create Volume