User Guide

6-30
Chapter 6: RAID Conguration
6.3.4 Resetting disks to Non-RAID
TakecautionbeforeyouresetaRAIDvolumeharddiskdrivetonon-RAID.Resettinga
RAIDvolumeharddiskdrivedeletesallinternalRAIDstructureonthedrive.
To reset a RAID set:
1. Fromtheutilitymainmenu,select
3. Reset Disks to Non-RAID
andpress<Enter>.
2. Presstheup/downarrowkeystoselectthedrive(s)ordisksoftheRAIDsetyouwant
toreset,thenpress<Space>.AsmalltrianglebeforethePortnumbermarksthe
selecteddrive.Press<Enter>whenyouaredone.
3. Press<Y>intheconrmationwindowtoresetthedrive(s)orpress<N>toreturntothe
utility main menu.
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Member Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Member Disk
Select the disks that should be reset.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
[ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[ RESET RAID DATA ]
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)