User Guide

Chapter 2: Hardware Setup
2-24
2.9 Installing Accelerators
• Use both of your hands in performing the following steps.
• Read the documentation that comes with your GPU accelerator before installing them.
• When installing more that one GPU accelerator, it is recommended to install the
accelerator on PCIE9 slot rst.
The system comes with two types of VGA power cable. One type has a red/white connector
which is used for general GPU/accelerators and the other has a black/white connector for
Nvidia 300W or above GPU card.
for Nvidia 300W GPU or higher cardfor general GPU/accelerators
metal cover
To install a GPU accelerator to the system:
1. Locate and remove the screws on the metal cover on the rear panel (A) then remove
the metal cover (B).