User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Installation Options
- Chapter 4: Motherboard Information
- Chapter 5: BIOS Setup
- 5.1 Managing and updating your BIOS
- 5.2 BIOS setup program
- 5.3 Main menu
- 5.4 Ai Tweaker
- 5.5 Performance Tuning menu
- 5.6 Advanced menu
- 5.6.1 Trusted Computing
- 5.6.2 ACPI Settings
- 5.6.3 Smart Settings
- 5.6.4 Super IO Configuration
- 5.6.5 Serial Port Console Redirection
- 5.6.6 Onboard LAN Configuration
- 5.6.7 APM
- 5.6.8 PCI Subsystem Settings
- 5.6.9 USB Configuration
- 5.6.10 CSM Configuration
- 5.6.11 NVMe Configuration
- 5.6.12 Network Stack Configuration
- 5.6.13 iSCSI Configuration
- 5.7 Platform Configuration menu
- 5.8 Socket Configuration menu
- 5.9 Event Logs menu
- 5.10 Server Mgmt menu
- 5.11 Security menu
- 5.12 Boot menu
- 5.13 Tool menu
- 5.14 Save & Exit menu
- Chapter 6: RAID Configuration
- Chapter 7: Driver Installation
- Appendix
Chapter 2: Hardware Setup
2-2
2.1 Chassis cover
There are three parts of the chassis cover you may remove.
The diagrams in this section are for reference only. The system layout may vary with
models, but the installation steps are the same for all models.
To remove the rear chassis cover:
1. Release the two (2) thumbscrews on the rear of the chassis.
2. Push and hold the cover buttons down.
3. Slide the chassis cover towards the rear to disengage it from the chassis and lift the
chassis cover to completely remove it from the chassis.