User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker
- 4.5 Performance Tuning menu
- 4.6 Advanced menu
- 4.6.1 Trusted Computing
- 4.6.2 ACPI Settings
- 4.6.3 Smart Settings
- 4.6.4 Super IO Configuration
- 4.6.5 Serial Port Console Redirection
- 4.6.6 Onboard LAN Configuration
- 4.6.7 APM
- 4.6.8 PCI Subsystem Settings
- 4.6.9 USB Configuration
- 4.6.10 CSM Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 Network Stack Configuration
- 4.6.13 iSCSI Configuration
- 4.7 Platform Configuration menu
- 4.8 Socket Configuration menu
- 4.9 Event Logs menu
- 4.10 Server Mgmt menu
- 4.11 Security menu
- 4.12 Boot menu
- 4.13 Tool menu
- 4.14 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4
Appendix
Changing System PCI-E Topology
Changing the system PCI-E topology through the BIOS setup program:
1. Launch the BIOS setup program.
Refer to the
BIOS setup program
section for the steps on launching the BIOS setup
program.
2. Navigate to the
Advanced menu
.
3. Select
System Topology
and press [Enter], then select
[Single Root]
or
[Dual Root]
to change your System PCI-E Topology.
2. Navigate to the
Settings
function, then select
System Topology
.
Changing the system PCI-E topology through the ASMB9-iKVM Web-based user interface:
1. Log in to the ASMB9-iKVM utility.
Refer to the user manual that came with your ASMB9 management card for the steps on
setting up and launching the ASMB9-iKVM Web-based user interface.