User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker
- 4.5 Performance Tuning menu
- 4.6 Advanced menu
- 4.6.1 Trusted Computing
- 4.6.2 ACPI Settings
- 4.6.3 Smart Settings
- 4.6.4 Super IO Configuration
- 4.6.5 Serial Port Console Redirection
- 4.6.6 Onboard LAN Configuration
- 4.6.7 APM
- 4.6.8 PCI Subsystem Settings
- 4.6.9 USB Configuration
- 4.6.10 CSM Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 Network Stack Configuration
- 4.6.13 iSCSI Configuration
- 4.7 Platform Configuration menu
- 4.8 Socket Configuration menu
- 4.9 Event Logs menu
- 4.10 Server Mgmt menu
- 4.11 Security menu
- 4.12 Boot menu
- 4.13 Tool menu
- 4.14 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
2-37
ASUS ESC8000 G4 Series
2. (optional) For AMD S9150 or later GPU cards, attach a mylar to the GPU air duct first
before installing the air duct to the GPU card.
3. (optional) For Nvidia
®
CPU-12V or above GPU cards, prepare the GPU card dongle or
power cable.
The mylar is bundled with the system and included in the accessory box.
GPU air duct (for Nvidia
®
/ AMD GPUs)
Mylar
The Nvidia
®
CPU-12V GPU card
dongle comes with your Nvidia
®
CPU-
12V GPU card. Ask your vendor or
retailer if the dongle is missing.
Nvidia CPU-12V GPU card dongle
ASUS CPU 8-pin power cable
The ASUS CPU 8-pin power
cable may be used to connect to
the GPU card and 6-pin power
connector.
A dongle may be required to connect the
system’s GPU power cable to the GPU
card. The Nvidia
®
CPU-12V GPU card will
not work, or may even cause damage to the
system, if the dongle is not used.
OR