User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker
- 4.5 Performance Tuning menu
- 4.6 Advanced menu
- 4.6.1 Trusted Computing
- 4.6.2 ACPI Settings
- 4.6.3 Smart Settings
- 4.6.4 Super IO Configuration
- 4.6.5 Serial Port Console Redirection
- 4.6.6 Onboard LAN Configuration
- 4.6.7 APM
- 4.6.8 PCI Subsystem Settings
- 4.6.9 USB Configuration
- 4.6.10 CSM Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 Network Stack Configuration
- 4.6.13 iSCSI Configuration
- 4.7 Platform Configuration menu
- 4.8 Socket Configuration menu
- 4.9 Event Logs menu
- 4.10 Server Mgmt menu
- 4.11 Security menu
- 4.12 Boot menu
- 4.13 Tool menu
- 4.14 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-11
ASUS ESC8000 G4 Series
Spread Spectrum [Auto]
Allows you to select the spread spectrum behavior. Disabling this option may enhance BCLK
overclocking ability.
Configuration options: [Auto] [Disabled] [Enabled]
Xeon Turbo Charger [Auto]
Allows you to select the Xeon Turbo Charger behavior.
Configuration options: [Auto] [Disabled] [Enabled]
CPU1-2 Input Voltage [Auto]
This item allows you to configure the input voltage fed to the processors by the external
voltage regulator.
DRAM Voltage (A1, B1, C1) / (D1, E1, F1) / (G1, H1, J1) / (K1, L1, M1)
This item allows you to configure the power supply for the DRAM.
VCCIO1-2 Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
VCCIO1-2 Voltage Offset [Auto]
This item allows you to configure the CPU core voltage offset value.
External DIGI+ Power Control
CPU1-2 Load-line Calibration [Auto]
Higher levels of the load-line calibration can get a higher voltage and better
overclocking performance, but increases the CPU and VRM thermal production. Select
from levels 1 to 9 to adjust the CPU power voltage from 0% to 125%.
Configuration options [Auto] [Level 1] - [Level 9]
The actual performance boost may vary depending on your CPU specification.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU1-2 Current Capability [Auto]
The CPU current capability adjusts the total power range for CPU overclocking.
A higher value provides a wider total power range and extends the overclocking
frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Configure higher values when overclocking or under a high CPU loading for extra power
support.