English All-in-One PC TV Quick Start Guide
Setting up your Digital / Analog TV Tuner English Before launching your TV Tuner application, check if your digital TV-in or analog TV-in cable is connected. Launching your TV Tuner Application To launch ArcSoft TV 5.0 in Windows® 8, do one of the following: • From the Windows® desktop, click the Arcsoft TV 5.0 icon. NOTE: The Arcsoft TV desktop shortcut icon is not available for AIO ET2300 • Click + to launch the search screen for applications.
The Setup Wizard will attempt to detect the installed TV Tuner device. Select the appropriate TV tuner card which came with your All-in-One PC. 4. Select the type of television service you use. • Select Cable TV for cable television. • Select Antenna TV for television received via an antenna. 5. Click Scan to begin scanning for available channels. 6. If your All-in-One PC came with both an analog and digital TV tuner, the Setup Wizard will prompt you to set up your second TV tuner.
Scheduling recordings of TV broadcasts English To schedule recordings of TV broadcasts: 1. On the main menu, click Schedule. 2. On the left panel, click Add. 3. Configure the following options: • Program Name • Channel • Frequency • Start Date/Time - Specify the date/ time of recording. • Duration - Specify length of recording. • Shut down the computer when finished recording 4. Click Done to save settings and schedule recording.
Using the Live TV Onscreen Controls English 1 2 3 4 5 6 7 8 10 9 1 Home button Click this icon to go to the Arcsoft TV 5.0 main menu. 2 TV/AV Click this button to toggle between analog TV and digital TV.* *This item is only available for All-in-One PCs with both an analog and digital TV tuner. 3 Take a screenshot Click this button to take a screen capture of the video or media playing. 4 Record Click this button to begin recording the television broadcast.
Using the Remote Control English Playback buttons 1 Navigation Keys 2 Start 3 Volume controls 4 Back 5 Number keys 6 7 ABC DEF 1 2 3 GHI JKL MNO 4 5 9 Media Center buttons 10 Channel controls WXYZ 8 9 * 0 # CLEAR ENTER G Y T 12 Information 6 TUV 7 R Power on/off 11 Mute PQRS Clear 8 13 Enter 14 Shortcut buttons 15 Teletext buttons B
Playback Buttons English 1 Play Starts playing media. If playback is paused, pressing this button begins playback from the current position. Pause Pauses media playback at the current position. Stop Stops playing media at the current position. Record Record the TV show to disk. If pressed while Live TV is on, records the current show. If pressed from the EPG screen, records a TV show or TV series to disk. Fast Forward Speeds up the playback of the media file to the first forward value (3X).
English 4 Volume controls Press the (+) button to increase the volume by one unit. Press the (-) button to decrease the volume by one unit. 5 Back Moves back one position in the user interface, 6 Number keys 7 CLEAR Power on/off Press this button to put the All-in-One PC to sleep mode. Press a second time to wake up the system from sleep mode. 8 9 Clear Clear any entered user input. Media Center Buttons* Record TV Displays the Recorded TV page in Windows Media Center.
Media Center Shortcut buttons English 14 Displays the main Radio page in Windows Media Center. Displays the Music Library in Windows Media Center. Displays the Picture Library in Windows Media Center. Displays the Video Library in Windows Media Center. *These buttons are only available for All-in-One PCs installed with Windows Media Center. 15 R G Y B Teletext buttons* Press these buttons to access Teletext features when available.
English 10
簡體中文 All-in-One PC TV 快速用戶手冊
啟用數碼 / 類比 TV Tuner(選台器) 在開啟 TV Tuner 應用程序之前,請先確認是否已經將纜線連接至數碼 TV-in 或模擬 TV-in 接口。 開啟 TV Tuner 應用程序 使用以下其中一個方式,在 Windows® 8 系統中啟用 ArcSoft TV 5.0: 簡體中文 ‧ 從 Windows® 桌面上,點擊 Arcsoft TV 5.0 圖標。 說明:Arcsoft TV 桌面快速圖標不適用於 AIO ET2300 機種。 + 以開啟應用程序的搜索畫 ‧ 點擊 面,在搜索欄中輸入“Arcsoft”,並從搜索 條件(search results)中點擊 Arcsoft TV 圖 標。 啟用 TV Tuner 應用程序 請依以下步驟開啟 ArcSoft TV 5.0 程 序: 1. 從主菜單裡,點擊 Live TV。 2.
接著 Setup Wizard(設置向導)將嘗試 檢測已安裝的 TV Tuner 設備,請選擇 隨附在您的 All-in-One 計算機裡合適的 TV tuner 卡。 4. 選擇您所使用的電視服務類型。 簡體中文 3. 如使用連接纜線來接收信號的電視,請 點擊 Cable TV。 如使用連接天線來接收信號的電視,請 點擊 Antenna TV。 5. 點擊 Scan(掃描)開始搜索所有頻道。 6. 若您的 All-in-One 計算機內置模擬和數碼 TV tuner(電視選台器),Setup Wizard( 設置向導)將會繼續引導您設置第二組 TV tuner。 點擊 Yes 開始設置第二組 TV Tuner。 點擊 No 則完成 Setup Wizard(設置向 導)功能。 7.
設置預錄電視節目 請依照以下步驟進行電視節目預錄設置: 簡體中文 1. 在主菜單中,點擊 Schedule(排程)。 2. 從左側欄位裡,點擊 Add(新增)。 3. 接著設置以下的項目: Program Name(節目名稱) Channel(頻道) Frequency(頻率) Start Date/Time(開始的日期/時間) 指定錄製的 date/time(日期/時間)。 Duration(時間) - 指定錄製的時間 長度。 Shut down the computer when finished recording(當完成錄製時請將計算機關機) 4. 點擊 Done(完成)以存儲設置值和排程的錄製。 說明:All-in-One 計算機需要在開機狀態下才能自動預錄電視節目。 5.
使用電視直播屏幕控制(Live TV Onscreen Controls) 簡體中文 1 2 3 1 Home 按鈕 2 TV/AV 4 5 6 7 8 10 9 點擊以至 Arcsoft TV 5.
使用遙控器 簡體中文 播放按鈕 1 導覽按鈕 2 開始 3 音量控制 4 返回鈕 5 數字鍵 6 7 ABC DEF 1 2 3 GHI JKL MNO 4 5 9 媒體中心按鈕 10 頻道控制 WXYZ 8 9 * 0 # CLEAR ENTER G Y T 12 信息 6 TUV 7 R 電源開啟/關閉 11 靜音 PQRS 清除鈕 8 13 進入按鈕 14 快速按鈕 15 圖文按鈕 B
1 播放按鈕 播放 開始播放媒體,若播放已經暫停,按下此鈕可以從暫停的點繼 續播放。 簡體中文 暫停 將播放的媒體暫停在目前觀看的位置。 停止 停止播放媒體在目前觀看的位置。 錄影 將電視節目錄影存到磁盤中,若按下此鈕時正在進行 Live TV( 電視直播),則會錄製目前正在觀看的節目。若在 EPG 屏幕下 按此鈕,則會錄製電視節目或電視劇至磁盤。 快轉 以三倍 (3X) 正常播放速度快轉正在播放的媒體文件。 倒轉 以三倍 (3X) 正常播放速度倒轉正在播放的媒體文件。 下一段 每按一下此鈕便會往後跳至下一段。 上一段 每按一下此鈕便會往前跳至上一段。 2 導覽鍵 按向上/向下鍵可以移動穿過子菜單裡的菜單欄。 按向上/向下鍵可以增加/減少數值。 按向左/向右鍵可以移動穿過主屏幕裡的主菜單。 按向左/向右鍵可以移動穿過在子菜單裡的項目。 按 OK 可以確認選擇。 3 開始* 帶領用戶進入 Windows Media Center Start(開始 Windows 媒體中 心)菜單。 *本按鈕只有當 All-in-One 計算機已安裝 Windows Media Center(Windows
4 音量控制 按 (+) 鈕可以逐一增加音量;按 (-) 鈕可以逐一降低音量。 簡體中文 5 返回鈕 在用戶界面中回到上一個位置。 6 數字鍵 7 CLEAR 電源開啟/關閉 按此鈕可以讓 All-in-One 計算機進入睡眠模式;按第二次則可以從睡眠模 式中喚醒系統。 8 9 Clear(清除) 清除任何已進入的用戶輸入。 Media Center(媒體中心)按鈕* Record TV(錄製電視節目) 顯示在 Windows Media Center(媒體中心)裡的Recorded TV 頁面。 Guide(指南) 顯示在 Windows Media Center(媒體中心)裡的指南。 Live TV(電視直播) 顯示目前正在播出的電視頻道。 DVD menu(DVD 菜單) 顯示 DVD 菜單。 *這些按鈕只有當 All-in-One 計算機已安裝 Windows Media Center(Windows 媒體 中心)時才有作用。 10 11 靜音 將計算機音效選擇為靜音。 12 信息 按此鈕可以顯示電影、影片或音樂的相關信息。 13 頻道控制 可以依序選擇
14 Media Center(媒體中心)快速鍵 顯示 Windows Media Center(媒體中心)裡的 Radio 主菜單。 顯示 Windows Media Center(媒體中心)裡的 Music Library 菜單。 簡體中文 顯示 Windows Media Center(媒體中心)裡的 Picture Library 菜單。 顯示 Windows Media Center(媒體中心)裡的 Video Library 菜單。 *這些按鈕只有當 All-in-One 計算機已安裝 Windows Media Center(Windows 媒體中心)時才有 作用。 15 R G Y B Teletext 按鈕* 當有此功能服務時,按下此鈕可以讀取 Teletext。 *這些按鈕只有當 All-in-One 計算機已安裝 Windows Media Center(Windows 媒 體中心)時才有作用。 說明: • 要享用 Windows Media Center(媒體中心)功能,您可以單獨選購 Windows 8 Media Center Pack(Windows 8 媒
簡體中文 10
快速使用手冊 繁體中文 All-in-One PC TV
啟用數位 / 類比 TV Tuner(選台器) 在開啟 TV Tuner 應用程式之前,請先確認是否已經將纜線連接至數位 TV-in 或類比 TV-in 接孔。 開啟 TV Tuner 應用程式 使用以下其中一個方式,在 Windows® 8 系統中啟用 ArcSoft TV 5.0: ‧ 從 Windows® 桌面上,點選 Arcsoft TV 5.0 圖示。 說明:Arcsoft TV 桌面快速圖示不適用於 AIO ET2300 機種。 繁體中文 + 以開啟應用程式的搜尋畫面, ‧ 點選 在搜尋欄中輸入“Arcsoft”,並從搜尋條件 (search results)中點選 Arcsoft TV 圖示。 啟用 TV Tuner 應用程式 請依以下步驟開啟 ArcSoft TV 5.0 程式: 1. 從主選單裡,點選 Live TV。 2.
3. 接著 Setup Wizard(設定精靈)將嘗試 偵測已安裝的 TV Tuner 裝置,請選擇 隨附在您的 All-in-One 電腦裡合適的 TV tuner 卡。 4. 選擇您所使用的電視服務類型。 如使用連接纜線來接收訊號的電視,請 點選 Cable TV。 5. 點選 Scan(掃描)開始搜尋所有頻道。 6. 若您的 All-in-One 電腦內建類比和數位 TV tuner(電視選台器),Setup Wizard( 設定精靈)將會繼續引導您設定第二組 TV tuner。 繁體中文 如使用連接天線來接收訊號的電視,請 點選 Antenna TV。 點選 Yes 開始設定第二組 TV Tuner。 點選 No 則完成 Setup Wizard(設定精 靈)功能。 7.
設定預錄電視節目 請依照以下步驟進行電視節目預錄設定: 1. 在主選單中,點選 Schedule(排程)。 2. 從左側欄位裡,點選 Add(新增)。 3. 接著設定以下的項目: Program Name(節目名稱) 繁體中文 Channel(頻道) Frequency(頻率) Start Date/Time(開始的日期/時間) 指定錄製的 date/time(日期/時間)。 Duration(時間) - 指定錄製的時間 長度。 Shut down the computer when finished recording(當完成錄製時請將電腦關機) 4. 點選 Done(完成)以儲存設定值和排程的錄製。 說明:All-in-One 電腦需要在開機狀態下才能自動預錄電視節目。 5.
使用電視直播螢幕控制(Live TV Onscreen Controls) 1 2 4 5 6 7 8 10 9 繁體中文 3 1 Home 按鈕 2 TV/AV 點選以至 Arcsoft TV 5.
使用遙控器 繁體中文 播放按鈕 1 導覽按鈕 2 開始 3 音量控制 4 返回鈕 5 數字鍵 6 7 ABC DEF 1 2 3 GHI JKL MNO 4 5 9 媒體中心按鈕 10 頻道控制 WXYZ 8 9 * 0 # CLEAR ENTER G Y T 12 資訊 6 TUV 7 R 電源開啟/關閉 11 靜音 PQRS 清除鈕 8 13 進入按鈕 14 快速按鈕 15 圖文按鈕 B
1 播放按鈕 播放 開始播放媒體,若播放已經暫停,按下此鈕可以從暫停的點繼 續播放。 暫停 將播放的媒體暫停在目前觀看的點。 停止 停止播放媒體在目前觀看的點。 錄影 將電視節目錄影存到磁碟中,若按下此鈕時正在進行 Live TV( 電視直播),則會錄製目前正在觀看的節目。若在 EPG 螢幕下 按此鈕,則會錄製電視節目或電視劇至磁碟。 繁體中文 快轉 以三倍 (3X) 正常播放速度快轉正在播放的媒體檔案。 倒轉 以三倍 (3X) 正常播放速度倒轉正在播放的媒體檔案。 下一段 每按一下此鈕便會往後跳至下一段。 上一段 每按一下此鈕便會往前跳至上一段。 2 導覽鍵 按向上/向下鍵可以移動穿過子選單裡的選單欄。 按向上/向下鍵可以增加/減少數值。 按向左/向右鍵可以移動穿過主螢幕裡的主選單。 按向左/向右鍵可以移動穿過在子選單裡的項目。 按 OK 可以確認選擇。 開始* 帶領使用者進入 Windows Media Center Start(開始 Windows 媒體中 心)選單。 3 *本按鈕只有當 All-in-One 電腦已安裝 Windows Media Center(Windows 媒體
4 音量控制 按 (+) 鈕可以逐一增加音量;按 (-) 鈕可以逐一降低音量。 5 返回鈕 在使用者介面中回到上一個位置。 6 數字鍵 7 CLEAR 電源開啟/關閉 按此鈕可以讓 All-in-One 電腦進入睡眠模式;按第二次則可以從睡眠模式 中喚醒系統。 8 繁體中文 9 Clear(清除) 清除任何已進入的使用者輸入。 Media Center(媒體中心)按鈕* Record TV(錄製電視節目) 顯示在 Windows Media Center(媒體中心)裡的Recorded TV 頁面。 Guide(指南) 顯示在 Windows Media Center(媒體中心)裡的指南。 Live TV(電視直播) 顯示目前正在播出的電視頻道。 DVD menu(DVD 選單) 顯示 DVD 選單。 *這些按鈕只有當 All-in-One 電腦已安裝 Windows Media Center(Windows 媒體中心) 時才有作用。 10 11 靜音 將電腦音效選擇為靜音。 12 資訊 按此鈕可以顯示電影、影片或音樂的相關資訊。 13 頻道控制 可以依序選擇上
14 Media Center(媒體中心)快速鍵 顯示 Windows Media Center(媒體中心)裡的 Radio 主選單。 顯示 Windows Media Center(媒體中心)裡的 Music Library 選單。 顯示 Windows Media Center(媒體中心)裡的 Picture Library 選單。 顯示 Windows Media Center(媒體中心)裡的 Video Library 選單。 *這些按鈕只有當 All-in-One 電腦已安裝 Windows Media Center(Windows 媒體中心)時才有作 用。 R G Y B Teletext 按鈕* 當有此功能服務時,按下此鈕可以讀取 Teletext。 繁體中文 15 *這些按鈕只有當 All-in-One 電腦已安裝 Windows Media Center(Windows 媒體中 心)時才有作用。 說明: • 要享用 Windows Media Center(媒體中心)功能,您可以單獨選購 Windows 8 Media Center Pack(Windows 8 媒
繁體中文 10