Italiano Manuale Utente Serie ET2011
I6514 Terza Edizione Marzo 2011 Italiano Copyright © 2011 ASUSTeK COMPUTER INC. Tutti i Diritti Riservati. Alcuna parte di questo manuale, compresi i prodotti e i software in esso descritti, può essere riprodotta,trasmessa, trascritta, archiviata in un sistema di recupero o tradotta in alcuna lingua, in alcuna forma e in alcun modo, fatta eccezione per la documentazione conservata dall’ acquirente a scopi di backup, senza l’espressa autorizzazione scritta di ASUSTeK COMPUTER INC. (“ASUS”).
Le condizioni di garanzia variano a seconda del tipo di prodotto e sono specificatamente indicate nel Certificato di Garanzia allegato, cui si fa espresso rinvio. Inoltre la presente garanzia non è valida in caso di danni o difetti dovuti ai seguenti fattori: (a) uso non idoneo, funzionamento o manutenzione improprio, incluso senza limitazioni l’ utilizzo del prodotto con una finalità diversa da quella conforme alle istruzioni di ASUSTeK COMPUTER INC.
Licenza Software I prodotti ASUS possono essere corredati da software, secondo la tipologia del prodotto. I software, abbinati ai prodotti, sono in versione “OEM”: il software OEM viene concesso in licenza all’utente finale, come parte integrante del prodotto; ciò significa che non può essere trasferito ad altri sistemi hardware e che, in caso di rottura, di furto o in ogni altra situazione che lo renda inutilizzabile, anche la possibilità di utilizzare il prodotto OEM viene compromessa.
Sommario Condizioni e Limiti di Copertura della Garanzia sul Prodotto.............................................. 3 Licenza Software................................................................................................................................... 4 Comunicazioni....................................................................................................................................... 7 Dichiarazione della Federal Communications Commission........................................
Posizionamento di All-in-one PC............................................................ 28 Collocazione su Scrivania................................................................................................................28 Montaggio su Parete (opzionale)..................................................................................................28 Installazione di All-in-one PC................................................................. 32 Connessione di Tastiera e Mouse via Cavo.....
Comunicazioni Dichiarazione della Federal Communications Commission Questo apparecchio rispetta i requisiti indicati nel regolamento FCC Parte 15. Il funzionamento è soggetto alle seguenti due condizioni: • • Questo apparecchio non causa interferenze dannose Questo apparecchio accetta qualsiasi interferenza ricevuta, comprese quelle che potrebbero causare un comportamento indesiderato.
Dichiarazione del Ministero delle Comunicazioni Canadese Questo apparecchio digitale non supera i limiti di classe B per emissioni radio, da parte di apparecchiature digitali, prescritti nel Regolamento sulle Interferenze Radio del Ministero delle Comunicazioni Canadese. Questo apparecchio digitale di classe B è conforme con la normativa canadese ICES-003.
Avviso Marchio CE Questo è un prodotto di Classe B e, in ambiente domestico, può causare interferenze radio. In questo caso, all’ utente potrebbe essere richiesto di adottare le misure adeguate. Marchio CE per dispositivi senza WLAN/Bluetooth Questa versione del dispositivo è conforme ai requisiti previsti dalla direttiva EEC 2004/108/EC “Electromagnetic compatibility”(Compatibilità elettromagnetica) e 2006/95/EC “Low voltage directive”(Direttiva per i Sistemi in Bassa Tensione).
Restrizione delle Bande di Frequenza Wireless (Francia) Alcune zone della Francia hanno bande di frequenza limitate.In questi casi la potenza massima all’interno è di: • • 10mW per l’intera banda dei 2.4 GHz (2400 MHz2483.5 MHz) 100mW per le frequenze tra 2446.5 MHz e 2483.5 MHz I canali compresi tra 10 e 13 operano nella banda dei 2446.6 MHz e 2483.5 MHz.
NON DISASSEMBLARE La garanzia non si applica a prodotti disassemblati dall’utente Avvertenza Batteria Ioni-Litio ATTENZIONE: Pericolo di esplosione se la batteria RTC (Real Time Clock) non è sostituita in modo corretto. Sostituire solo con un tipo uguale o equivalente, consigliato dal produttore. Eliminare le batterie utilizzate come da istruzioni del fabbricante. Divieto di Esposizione a Liquidi NON esporre oppure utilizzare in prossimità di liquidi, pioggia o umidità.
Dichiarazione di Conformità con le Normative Internazionali in Materia di Tutela Ambientale Nella progettazione e realizzazione dei suoi prodotti, ASUS rispetta il concetto del “Green Design”, assicurandosi che tutte le fasi produttive siano in linea con le normative internazionali sull’ambiente, e mette a conoscenza del pubblico le informazioni sulla conformità con le disposizioni in vigore nei vari paesi del mondo. Consultare la pagina web http://csr.asus.com/english/Compliance.
Certificazione ENERGY STAR ENERGY STAR è un programma congiunto dell’agenzia americana per la protezione ambientale (U.S. Environmental Protection Agency) e del ministero statunitense per l’energia (U.S. Department of Energy) che mira a proteggere l’ambiente attraverso l’impiego di prodotti ecologici, più efficienti dal punto di vista energetico.
Norme di Sicurezza All-in-one PC - Serie ET2011 è stato realizzato e testato per soddisfare i nuovissimi standard di sicurezza per apparecchiature IT. Tuttavia, per garantirne l’osservanza, è importante leggere le seguenti norme di sicurezza. Installazione del Sistema • • • • • • Prima di utilizzare l’apparecchio, leggere e seguire tutte le istruzioni contenute nella documentazione. Non utilizzare questo prodotto in prossimità di acqua o di sorgenti di calore, come un radiatore.
Pressione Sonora Avvertenza: un’eccessiva pressione del suono, proveniente da cuffie o auricolari,potrebbe causare danni all’udito. Si prega di notare che la regolazione del controllo volume e dell’equalizzatore, al di sopra della posizione centrale, potrebbe aumentare la tensione in uscita di cuffie e auricolari e, pertanto, il livello della pressione sonora.
Benvenuti Complimenti per aver acquistato All-in-one PC - Serie ET2011.Le illustrazioni di seguito mostrano il contenuto della confezione del nuovo prodotto. Contattare il rivenditore, in caso di articoli danneggiati o mancanti.
Descrizione di All-in-one PC Vista Frontale Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema 1 2 3 Italiano 4 MODE 12 1 2 11 10 9 MENU 8 7 6 5 Webcamera La webcamera integrata, insieme al microfono digitale, consente di effettuare video conversazioni online. LED della Webcamera Indica se la webcamera integrata è stata attivata.
3 Microfono Digitale (Integrato) 4 7 8 Italiano 18 Display LCD (Funzione touchscreen su modelli selezionati) Lo schermo LCD da 20 pollici, con risoluzione ottimale pari a 1600 x 900, si connota per la funzione touchscreen, che porta la vita digitale sulla punta delle dita. Pulsante di Accensione 5 6 Il microfono digitale incorporato può essere utilizzato per video conferenze,narrazioni vocali, registrazioni audio e applicazioni multimediali.
1 2 3 Italiano 4 12 1 2 3 11 10 9 8 7 6 5 Webcamera La webcamera integrata, insieme al microfono digitale, consente di effettuare video conversazioni online. LED della Webcamera Indica se la webcamera integrata è stata attivata. Microfono Digitale (Integrato) Il microfono digitale incorporato può essere utilizzato per video conferenze,narrazioni vocali, registrazioni audio e applicazioni multimediali.
4 7 8 9 Italiano 20 Lo schermo LCD da 20 pollici, con risoluzione ottimale pari a 1600 x 900, si connota per la funzione touchscreen, che porta la vita digitale sulla punta delle dita. Pulsante di Accensione 5 6 Display LCD (Funzione touchscreen su modelli selezionati) Il pulsante di accensione permette di accendere e spegnere il sistema.
Vista Posteriore Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema. Italiano HDMI ANT/CABLE 2 1 2 1 3 4 5 6 7 Piedistallo Consente di posizionare il sistema in verticale. Porta per Lucchetto Kensington® La porta per lucchetto Kensington® consente di proteggere il computer con un dispositivo di sicurezza compatibile Kensington®.
3 Ingresso Alimentazione (DC 19V) L’adattatore in dotazione converte la corrente elettrica alternata di rete in corrente continua da utilizzare con questo jack. L’energia elettrica fornita attraverso questo jack alimenta il PC. Per evitare danni al PC, utilizzare sempre l’adattatore in dotazione. Quando in funzione, l’adattatore può diventare piuttosto caldo. Per questo motivo, non deve essere coperto e va tenuto lontano dal corpo.
Italiano 2 1 2 1 3 4 5 6 7 Piedistallo Consente di posizionare il sistema in verticale. Porta per Lucchetto Kensington® La porta per lucchetto Kensington® consente di proteggere il computer con un dispositivo di sicurezza compatibile Kensington®. Questi lucchetti di sicurezza di solito sono provvisti di un cavo metallico ed impediscono al computer di essere rimosso da una postazione fissa.
3 Ingresso Alimentazione (DC 19V) L’adattatore in dotazione converte la corrente elettrica alternata di rete in corrente continua da utilizzare con questo jack. L’energia elettrica fornita attraverso questo jack alimenta il PC. Per evitare danni al PC, utilizzare sempre l’adattatore in dotazione. Quando in funzione, l’adattatore può diventare piuttosto caldo. Per questo motivo, non deve essere coperto e va tenuto lontano dal corpo.
Viste Laterali Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema. 1 Lettore di Schede di Memoria Di solito, per leggere le schede di memoria, deve essere acquistato separatamente un lettore di schede esterno. Questo All-in-one PC è dotato di un lettore di schede di memoria integrato con supporto schede MMC/SD/ SDHC impiegate in dispositivi quali fotocamere digitali, lettori MP3, telefoni cellulari e PDA.
Uso del Display Touchscreen All-in-one PC porta la vita digitale sulla punta delle dita e funziona facilmente al tocco o con l’uso di uno stilo. Il tocco funziona come un mouse. • • Tocco breve = clic con il tasto sinistro di un mouse. Tocco lungo = clic con il tasto destro di un mouse. Italiano Il display Touchscreen è disponibile su modelli selezionati. Visualizzazione del Puntatore Touchscreen Il puntatore touchscreen, che rappresenta un mouse virtuale, facilita l’uso del display touchscreen.
Cliccare Change touch input settings. 3. Cliccare sulla scheda Touch in alto e 4. selezionare la casella accanto a Show the touch pointer when I’m interacting with items on the screen. Premere OK per terminare la configurazione. Al tocco dello schermo, sarà visualizzato un mouse virtuale. Italiano 2. Pulizia del Display Touchscreen Il display Touchscreen richiede una pulizia periodica per poter mantenere sempre la massima sensibilità.
Posizionamento di All-in-one PC Collocazione su Scrivania Collocare All-in-one PC su una superficie piana orizzontale, come un tavolo o una scrivania, e regolare il piedistallo, come da figura, sino a quando non scatta in posizione�������������������� . Quindi, inclinare lo schermo ad un angolo compreso fra 12 e 27 gradi rispetto alla posizione verticale.
Mettere il piedistallo in posizione orizzontale, come da figura. 3. Seguire la direzione della freccia per sbloccare il piedistallo da All-in-one PC. 4. Seguire la direzione della freccia per rimuovere il piedistallo da All-in-one PC. HDMI 2.
5. Estrarre le due gommine all’interno dei fori del pannello. HDMI ANT/C 6. Fissare la piastra di fissaggio al pannello posteriore utilizzando le quattro viti. Fare attenzione alla corretta orientazione delle viti.
7. Installare saldamente l’apposita staffa per il montaggio su parete (VESA75 oppure VESA100) sull’All-in-one PC mediante le quattro viti (M4 x 16mm) in dotazione con il kit. • Il kit per il montaggio su parete qui illustrato è puramente indicativo. • Il kit e le viti per il montaggio su parete devono essere acquistati a parte. 100 mm Italiano 75 mm HDMI ANT/C 8.
Installazione di All-in-one PC Connessione di Tastiera e Mouse via Cavo Collegare la tastiera e il mouse alla porta USB sul pannello posteriore ( 1 ). Se il cavo della tastiera e del mouse non è lungo a sufficienza, è anche possibile collegarli alla porta� USB sul lato sinistro di All-in-one PC( 2 ). 2 HDMI ANT/CABL E 1 Italiano Connessione di Tastiera e Mouse senza Cavo 1. Installare le batterie nel mouse e nella tastiera senza cavo. 2.
Accensione del Sistema Collegare l’adattatore AC in dotazione al jack DC IN sul pannello posteriore ( 1 2 3 ) e poi premere il Pulsante di accensione sul pannello frontale ( 4 ) per accendere il sistema. 2 HDMI ANT/C A B LE 3 1 Italiano AVVERTENZA! NON collegare il cavo di alimentazione AC ad una presa AC, prima di aver collegato la spina DC al sistema, altrimenti, l’adattatore AC-DC potrebbe essere danneggiato.
Taratura dello Schermo In All-in-one PC è pre-installato un software che consente di regolare la precisione del display Touchscreen. Il display Touchscreen è disponibile su modelli selezionati. Dal desktop di Windows®, cliccare Start > Pannello di Controllo > Hardware e Suoni > Impostazioni Tablet PC e cliccare Esegui taratura dello schermo per input penna o tocco. 2. Dalla scheda Schermo, cliccare Taratura. 3.
Configurazione di una Connessione Wireless 1. In area di notifica di Windows®,cliccare sull'icona di rete wireless con una stella arancione . 2. Selezionare dall’elenco la rete senza fili a cui connettersi e poi cliccare Connect. Nell'impossibilità di trovare il punto di accesso desiderato, cliccare sull'icona Refresh nell'angolo superiore destro per aggiornare e cercare di nuovo nell'elenco. Italiano Durante la connessione con una rete protetta, inserire la chiave o codice di protezione della rete.
Configurazione di una Connessione via Cavo Tramite IP statico 1. Cliccare sull'icona con il triangolo giallo in area di notifica di Windows® e selezionare Open Network and Sharing Center. Assicurarsi di aver collegato il cavo LAN a All-in-one PC. Sul pannello di sinistra, cliccare Change adapter settings 3. Con il tasto di destra del mouse, cliccare Local Area Connection e poi selezionare Properties. Italiano 2.
Selezionare Internet Protocol Version 4(TCP/IPv4) e premere Properties. 5. Selezionare Use the following IP address. 6. Inserire IP address, Subnet mask e Default gateway. 7. Se necessario, immettere l’indirizzo del Preferred DNS server. 8. Dopo aver inserito i valori corrispondenti, premere OK per terminare la configurazione. Italiano 4.
Tramite un IP dinamico (PPPoE) 1. Ripetere i passaggi 1–4 del paragrafo precedente. 2 Selezionare Obtain an IP address automatically e premere OK. (Se si utilizza PPPoE, proseguire come di seguito) Ritornare a Network and Sharing Center e poi selezionare Set up a new connection or network. 4. Scegliere Connect to the Internet e premere Next. Italiano 3.
Selezionare Broadband (PPPoE) e premere Next. 6. Inserire Nome utente,Password e nome della connessione. Premere Connect. 7. Premere Close per terminare la configurazione. Italiano 5.
8. Cliccare sull'icona di rete in area di notifica e poi sulla connessione appena creata. 9. Utilizzare nome utente e password. Premere Connect per stabilire la connessione a Internet.
Configurazione dell’Uscita Audio All-in-one PC supporta diversi tipi di configurazioni audio. Configurare il sistema mediante altoparlanti stereo. Configurazione degli Altoparlanti Il sistema può essere configurato nel seguente modo: Nome 2-canali (stereo) Sistema di Altoparlanti Altoparlante sinistro e altoparlante destro. Jack Audio Cuffie/2-canali Audio Out Mic In Italiano Un set di altoparlanti stereo è un sistema di altoparlanti a due canali, sinistro-destro.
Ripristino del Sistema Mediante Partizione di Ripristino Ripristino del Sistema Operativo sulla Partizione Predefinita (Ripristino con F9) 1. Disattivare Boot Booster nel BIOS. 2. Premere [F9] in fase di caricamento iniziale. 3. Quando compare,selezionare Windows setup [EMS Enabled] e premere [Enter]. 4. Selezionare la lingua e premere Next. 5. Selezionare Recover the OS to the Default Partition e premere Next. 6. Sarà visualizzata la partizione predefinita. Premere Next. 7.
Mediante Dispositivo di Archiviazione USB (Ripristino via USB) Quando si verifica un crash della Partizione di Ripristino del sistema, utilizzare un dispositivo di archiviazione USB per ripristinare la partizione predefinita o le impostazioni predefinite del sistema nell’intero disco rigido. 1. Disattivare Boot Booster nel BIOS. 2. Collegare il dispositivo di archiviazione USB dove eseguire la copia di riserva delle impostazioni predefinite. 3.
E Dec EC claration of Confo ormity W the und We, dersigned,, M Manufacture er: ASUSTek COMPUTER C R INC. A Address, Citty: No. 150, LI-TE RD., PE EITOU, TAIPEI 112, TAIW WAN R.O.C. C Country: TAIWAN A Authorized r representativ ve in Europ pe: ASUS COM MPUTER Gm mbH A Address, Citty: HARKORT T STR.