English User Manual MODE ET2012 Series MENU
English E6991 First Edition November 2011 Copyright © 2011 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER, INC. (“ASUS”).
Contents..................................................................................................... 3 Notices...................................................................................................................................................... 5 Federal Communications Commission Statement.......................................................... 5 Canadian Department of Communications Statement.................................................
English ET2012A.................................................................................................................................................23 Side views..............................................................................................................................................25 Using the touch screen.....................................................................................................................26 Showing the touch pointer..........................
English Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Department of Communications Statement English This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
CE Mark Warning English This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
France Restricted Wireless Frequency Bands English Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) • 100mW for frequencies between 2446.5 MHz and 2483.5 MHz Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
English NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users Lithium-Ion Battery Warning CAUTION: Danger of explosion if RTC (Real Time Clock) battery is incorrectly replaced. It should be replaced only with the same or equivalent type by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. No Exposure to Liquids DO NOT expose to or use near liquids, rain, or moisture. This product is not waterproof or oil-proof.
Global Environmental Regulation Compliance and Declaration English ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
ENERGY STAR complied product English ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
Safety information English Your All-in-one PC ET2012 Series is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface.
English Sound Pressure Warning Excessive sound pressure from earphones or headphones can cause hearing damage or loss. Adjustment of the volume control as well as the equalizer to settings other than the center position may increase the earphones or headphones output voltage and the sound pressure level.
Welcome English Congratulations on your purchase of All-in-one PC ET2012 Series. The following illustration displays the package contents of your new product. If any of the following items is damaged or missing, contact your retailer. Package contents MODE MENU All-in-one PC ET2012 Series Keyboard (optional) Mouse (optional) AC adapter Power cord Warranty card Wall mount screws (optional) KBM USB receiver dongle (optional) Note: 1.
English Getting to know your All-in-one PC Front view Refer to the following diagram to identify the components on this side of the system. The front view may differ depending on the model you purchased.
1 English 2 3 5 7 8 9 16 Webcam LED Indicates that the built-in webcam is enabled. The built-in digital microphone can be used for video conferencing, voice narrations, audio recordings, and multimedia applications. LCD Display (Touch-enabled function on selected models) The 20-inch LCD display, with an optimal resolution of 1600 x 900, features touch function that brings digital life to your fingertips.
1 English ET2012EU/ ET2012IU/ ET2012A Series 2 3 4 11 10 9 8 7 6 5 All-in-one PC ET2012 Series 17
1 English 2 3 5 7 8 9 18 Webcam LED Indicates that the built-in webcam is enabled. The built-in digital microphone can be used for video conferencing, voice narrations, audio recordings, and multimedia applications. LCD Display (Touch-enabled function on selected models) The 20-inch LCD display, with an optimal resolution of 1600 x 900, features touch function that brings digital life to your fingertips.
Rear view English Refer to the following diagram to identify the components on this side of the system. ET2012EG/ ET2012IG Series ANT/CABLE 2 1 2 1 3 4 5 6 7 8 Stand Allows you to position the system upright. Kensington® Lock port The Kensington® lock port allows the computer to be secured using Kensington® compatible security products. These security products usually include a metal cable and lock that prevent the computer to be removed from a fixed object.
3 Power input English The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body.
2 1 2 1 English ET2012EU/ ET2012IU Series 3 4 5 6 7 Stand Allows you to position the system upright. Kensington® Lock port The Kensington® lock port allows the computer to be secured using Kensington® compatible security products. These security products usually include a metal cable and lock that prevent the computer to be removed from a fixed object.
3 English Power input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body.
English ET2012A 2 1 2 1 3 4 5 6 7 Stand Allows you to position the system upright. Kensington® Lock port The Kensington® lock port allows the computer to be secured using Kensington® compatible security products. These security products usually include a metal cable and lock that prevent the computer to be removed from a fixed object.
3 English Power input The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm or hot when in use. Do not cover the adapter and keep it away from your body.
Side views 1 Memory card reader (on selected model) 2 3 English Refer to the following diagrams to identify the components on both sides of the system. 4 5 6 Normally an external memory card reader must be purchased separately in order to read memory cards. This All-in-one PC has a built-in memory card reader that supports MMC/SD/SDHC cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs. USB 2.0 port/USB 3.
Using the touch screen English All-in-one PC brings digital life to your fingertips. With a few touches, you can make All-in-one PC work at your command. Your touch functions like a mouse device: • • Touch = left-click on the mouse Touch and hold = right-click on the mouse The touch-enabled screen is available on selected models. Showing the touch pointer The touch pointer, virtual mouse, helps you use the touch-enabled screen more conveniently. To show the touch pointer 1.
Click Change touch input settings. 3. Click the Touch tab on the top and click the box before Show the touch pointer when I’m interacting with items on the screen. Click OK to finish the configuration. English 2. 4. You will see a virtual mouse on the screen when you touch the screen. Cleaning the touch screen The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the screen clean from foreign objects or excessive dust accumulation.
Positioning your All-in-one PC English Placing on the desktop Place your All-in-one PC on a flat surface such as a table or desk, and �������������������������� pull the stand open until it snaps in place. Then, tilt the display panel to an angle of between 12 and 30 degrees from an upright position.
Installing the wall mount screw (optional) 1. Place your All-in-one PC face-down on a flat surface, such as a table or desk, and then remove the two screws beside the stand. Keep the screws for future use in case you want to reinstall the stand. 2. To release the stand, press the stand downward, shove it forward, and lift. Take out the stand and put it aside.
Remove the four rubber caps, from the rear panel holes,. 4. Secure the four wall mount screws to the rear panel holes. English 3.
Mount the All-in-one PC onto a firm wall by applying a standard wall mount kit (pad and rack) to the wall mount screws. Follow the instructions described in the installation manual that came with your wall mount kit. • The wall mount screws are optional accessories. • The wall mount kit should comply with VESA 100 standards, which can be purchased separately. • To ensure safety, please read the wall mount kit installation manual carefully before mounting your All-in-one PC to the wall.
Setting up your All-in-one PC English Connecting the wired keyboard and mouse Connect the keyboard and mouse to the USB port on the rear panel ( 1 ). Y�������������������� ou may also �������� connect the keyboard and mouse to the USB port on the left side ( 2 ) if the keyboard and mouse cable is not long enough�. 2 1 Connecting the wireless keyboard and mouse 1. Install batteries to the wireless keyboard and mouse. 2. Insert the wireless keyboard/mouse receiver to the USB port on the Allin-one PC.
Powering on the system 1 2 3 ) and then press English Connect the supplied AC adapter to the DC IN jack on the rear panel ( the Power switch on the front panel ( 4 ) to turn on the system. 2 3 1 WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug to the system. Doing so may damage the AC-DC adapter. 4 Powering off • • To put the system into suspend mode, press the Power switch on the front panel.
Calibrating the screen English All-in-one PC comes with the following software tool that allows you to adjust touch screen precision. The touch-enabled screen is available on selected models. 1. From the Windows® desktop, click Start > Control Panel > Hardware and Sound > Tablet PC Settings and click Calibrate the screen for pen or touch input. 2. From the Display tab, click Calibrate. 3. To provide calibration samples, tap the crosshair each time that it appears on the screen.
1. Click the wireless network icon with an orange star 2. Select the wireless access point you want to connect to from the list and click Connect to build the connection. English Configuring a wireless connection in the Windows® Notification area. If you cannot find the desired access point, click the Refresh icon on the upper right corner to refresh and search in the list again. Enter the network security key when connecting to a security-enabled network. 3.
Configuring a wired connection English Using a static IP 1. Click the network icon with a yellow warning triangle in the Windows® Notification area and select Open Network and Sharing Center. Ensure that you have connected the LAN cable to the All-in-one PC. 36 2. Click Change adapter settings in the left pane. 3. Right-click Local Area Connection and select Properties.
Click Internet Protocol Version 4(TCP/ IPv4) and click Properties. 5. Select Use the following IP address. 6. Enter your IP address, Subnet mask, and Default gateway. 7. If needed, enter the Preferred DNS server address. 8. After entering all the related values, click OK to finish the configuration. English 4.
Using a dynamic IP (PPPoE) English 1. Repeat steps 1–4 in the previous section. 2 Select Obtain an IP address automatically and click OK. (Continue the following steps if using PPPoE) 38 3. Return to the Network and Sharing Center and then click Set up a new connection or network. 4. Select Connect to the Internet and click Next.
Select Broadband (PPPoE) and click Next. 6. Enter your User name and, Password, and Connection name. Click Connect. 7. Click Close to finish the configuration. English 5.
Click the network icon in the notification area and click the connection you just created. 9. Enter your user name and password. Click Connect to connect to the Internet. English 8.
Configuring the audio output English All-in-one PC supports different types of audio configurations. Set up the system using stereo speakers. Speaker configurations Set up the system with the following speaker configurations: Name 2-channel (stereo) Speaker system Left speaker and right speaker. Audio jack Headphones/2-channel Audio Out Mic In A stereo speaker set is a left-right, two channel speaker system. A multi-channel audio speaker has a left-right front and left-right rear (surround) channel.
Recovering your system English Using the Recovery Partition Recovering the OS to the Factory Default Partition (F9 Recovery) 1. Press [F9] during bootup. 2. Select Windows setup [EMS Enabled] when this item appears and press [Enter]. 3. Select the language and click Next. 4. Select Recover the OS to the Default Partition and click Next. 5. The factory default partition will be displayed. Click Next. 6. Data on the default partition will be cleared. Click Recover to start the system recovery.
English Using the USB storage device (USB Restore) When the Recovery Partition in your system is crashed, use the USB storage device to restore the system to the factory default partition or the factory environment data to the entire hard disk. 1. Connect the USB storage device that you back up the factory environment data to. 2. Press on bootup and the Please select boot device screen appears. Select USB: XXXXXX to boot from the connected USB storage device. 3.
English 44 Manufacturer ASUSTek COMPUTER INC. Address, City No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C Country TAIWAN Authorized Representative in Europe ASUS COMPUTER GmbH Address, City HARKORT STR.
