Italiano ASUS Manuale Utente Serie ET2020
I8268 Aprile 2013 Italiano INFORMAZIONI SUL COPYRIGHT Copyright © 2013 ASUSTeK Computers, Inc. Tutti i Diritti Riservati. Nessuna parte di questo manuale, compresi i prodotti e i software in esso descritti, può essere riprodotta, trasmessa, trascritta, archiviata in un sistema di recupero o tradotta in alcuna lingua, in alcuna forma e in alcun modo, fatta eccezione per la documentazione conservata dall’acquirente a scopi di backup, senza l’espressa autorizzazione scritta di ASUSTeK COMPUTER INC. (“ASUS”).
Le condizioni di garanzia variano a seconda del tipo di prodotto e sono specificatamente indicate nel Certificato di Garanzia allegato cui si fa espresso rinvio. Inoltre, la presente garanzia, non è valida in caso di danni o difetti dovuti ai seguenti fattori: (a) uso non idoneo, funzionamento o manutenzione impropri inclusi, senza limitazioni, e l’utilizzo del prodotto con una finalità diversa da quella conforme alle istruzioni fornite da ASUSTeK COMPUTER INC.
Indice Italiano Informazioni sul manuale.................................................................................................................................... 6 Note e messaggi del manuale.............................................................................................................................. 7 Icone...............................................................................................................................................................................
Italiano Nozioni di Base sulle applicazioni Windows®.............................................................................................. 38 Lanciare le applicazioni........................................................................................................................................... 38 Personalizzare le applicazioni...............................................................................................................................
Informazioni sul manuale Italiano Questo manuale descrive le caratteristiche hardware e software del vostro All-in-One PC e le organizza nei seguenti capitoli:. Capitolo 1: Configurazione Hardware Descrizione dei componenti hardware dell'All-in-One PC. Capitolo 2: Utilizzo dell'All-in-One PC Informazioni sull'uso dell'All-in-One PC. Capitolo 3: Nozioni di Base su Windows® 8 Informazioni generali sull'utilizzo di Windows® 8 sull'All-in-One PC.
Note e messaggi del manuale Italiano Per evidenziare le informazioni chiave contenute nel manuale alcuni messaggi sono presentati nelle forme seguenti: IMPORTANTE! Messaggio contenente informazioni importanti per il completamento di un'operazione. NOTA: Messaggio contenente informazioni aggiuntive e suggerimenti per completare un'operazione.
Informazioni sulla sicurezza Italiano Il vostro All-in-One PC ET22 è stato progettato e testato per soddisfare gli ultimi standard di sicurezza per dispositivi informatici. Tuttavia, per garantire la vostra sicurezza, è importante leggere e comprendere le seguenti istruzioni sulla sicurezza. Informazioni preliminari • • • • • • Leggete e seguite tutte le istruzioni di questa documentazione prima di accendere il sistema. Non utilizzate questo prodotto vicino all'acqua o a fonti di calore come radiatori.
Avviso pressione sonora Italiano Un'eccessiva pressione sonora proveniente da cuffie o auricolari potrebbe causare danni permanenti o perdita dell'udito. Regolazioni del controllo volume, così come dell'equalizzatore (ad esempio spostando il fronte sonoro verso destra o verso sinistra), potrebbero aumentare il voltaggio in uscita di cuffie o auricolari e, di conseguenza, la pressione sonora.
Contenuto della confezione Italiano All-in-One PC ET2020 Mouse (via cavo o senza fili, opzionale) Tastiera (via cavo o senza fili, opzionale) Adattatore AC Cavo di alimentazione Certificato di garanzia Ricevitore dongle USB KBM (opzionale) Quic k Gu ide Guida Rapida 1 2 4 5 6 7 8 9 * 0 CLEAR R G 3 # ENTER Y B Telecomando (opzionale) 10 Viti per il montaggio a parete NOTA: Le immagini relative a tastiera, mouse, alimentatore, telecomando e ricevitore dongle USB KBM hanno puro sc
Italiano Capitolo 1: Configurazione Hardware Conoscete il vostro All-in-One PC Vista Anteriore Display LCD touch All-in-One PC Serie ET2020 11
Italiano Microfono digitale (integrato) Il microfono digitale integrato può essere usato in occasione di video-conferenze, per sfruttare l'assistente vocale, per registrazioni audio o per applicazioni multimediali. Webcam La Webcam integrata, in combinazione con il microfono digitale integrato, vi permette di partecipare a videoconferenze. LED Webcam Indica che la Webcam integrata è abilitata. Display LCD Touch Il display LCD fornisce una risoluzione ottimale.
Italiano Display LCD No-Touch All-in-One PC Serie ET2020 13
Italiano Microfono digitale (integrato) Il microfono digitale integrato può essere usato in occasione di video-conferenze, per sfruttare l'assistente vocale, per registrazioni audio o per applicazioni multimediali. Webcam La Webcam integrata, in combinazione con il microfono digitale integrato, vi permette di partecipare a videoconferenze. LED Webcam Indica che la Webcam integrata è abilitata. Display LCD No-Touch Il display LCD fornisce una risoluzione ottimale.
Italiano Vista Posteriore Serie ET2020A Fori per il montaggio a parete Assicurate le quattro viti per il montaggio a questi fori e montate l'All-in-One PC ad una parete. NOTA: Tutti i modelli della Serie ET2020 sono forniti di viti per il montaggio a parete. Foro di sicurezza Kensington® Il foro di sicurezza Kensington® permette di mettere al sicuro il vostro PC tramite l'utilizzo di prodotti di sicurezza Kensington® compatibili.
Italiano Ingresso alimentazione (DC-In) L'adattatore di alimentazione AC/DC in dotazione converte la corrente alternata del vostro impianto domestico in corrente continua e la fornisce a questo ingresso. Per prevenire possibili danni al PC usate solamente l'adattatore di alimentazione in dotazione. ATTENZIONE! L'adattatore di alimentazione potrebbe riscaldarsi durante l'uso. Non coprite mai l'adattatore di alimentazione e tenetelo lontano dal corpo.
Italiano Serie ET2020IU Fori per il montaggio a parete Assicurate le quattro viti per il montaggio a questi fori e montate l'All-in-One PC ad una parete. NOTA: Tutti i modelli della Serie ET2020 sono forniti di viti per il montaggio a muro. Foro di sicurezza Kensington® Il foro di sicurezza Kensington® permette di mettere al sicuro il vostro PC tramite l'utilizzo di prodotti di sicurezza Kensington® compatibili.
Italiano Ingresso alimentazione (DC-In) L'adattatore di alimentazione AC/DC in dotazione converte la corrente alternata del vostro impianto domestico in corrente continua e la fornisce a questo ingresso. Per prevenire possibili danni al PC usate solamente l'adattatore di alimentazione in dotazione. ATTENZIONE! L'adattatore di alimentazione potrebbe riscaldarsi durante l'uso. Non coprite mai l'adattatore di alimentazione e tenetelo lontano dal corpo.
Italiano Serie ET2020IN Fori per il montaggio a parete Assicurate le quattro viti per il montaggio a questi fori e montate l'All-in-One PC ad una parete. NOTA: Tutti i modelli della Serie ET2020 sono forniti di viti per il montaggio a muro. Foro di sicurezza Kensington® Il foro di sicurezza Kensington® permette di mettere al sicuro il vostro PC tramite l'utilizzo di prodotti di sicurezza Kensington® compatibili.
Italiano Ingresso alimentazione (DC-In) L'adattatore di alimentazione AC/DC in dotazione converte la corrente alternata del vostro impianto domestico in corrente continua e la fornisce a questo ingresso. Per prevenire possibili danni al PC usate solamente l'adattatore di alimentazione in dotazione. ATTENZIONE! L'adattatore di alimentazione potrebbe riscaldarsi durante l'uso. Non coprite mai l'adattatore di alimentazione e tenetelo lontano dal corpo.
Italiano Viste Laterali Porta USB 2.0 Questa porta USB (Universal Serial Bus) è compatibile con dispositivi USB 2.0 o USB 1.1 come tastiere, dispositivi di puntamento, memorie flash, Hard Disk esterni, altoparlanti, videocamere e stampanti. Porte USB 3.0 Queste porte USB 3.0 (Universal Serial Bus 3.0) forniscono una velocità di trasmissione che può arrivare fino a 5 Gbit/s e sono retrocompatibili con lo standard USB 2.0.
Italiano Jack Cuffie Questo jack stereo (3.5mm) permette il collegamento del vostro All-in-One PC a cuffie o altoparlanti amplificati. Usando questo jack disabiliterete automaticamente gli altoparlanti integrati dell'All-in-One PC. Jack del microfono Il jack del microfono è stato progettato per permettere la connessione di un microfono che può essere usato in occasione di video-conferenze, per sfruttare l'assistente vocale o per semplici registrazioni audio.
Italiano Capitolo 2: Utilizzo dell'All-in-One PC Posizionamento del vostro All-in-One PC 1. Estraete il piedistallo dalla parte posteriore dell'All-in-One PC e disponete il dispositivo su una superficie stabile. 2. Spingete delicatamente il display fino a quando non sentite un click. Dovete inclinare il vostro display con un angolo compreso tra i 15° e i 45° per assicurarvi che il vostro All-in-One PC sia posizionato correttamente e sia stabile. All-in-One PC Serie ET2020 15o (+1.5o) 45o (+1.
Montaggio a parete Italiano Per montare il vostro ASUS All-in-One PC ad una parete avrete bisogno delle viti per il montaggio (incluse) e di un kit per il montaggio (compatibile VESA 100). 1. Posizionate l'All-in-One PC a faccia in giù su una superficie piana. 2. Rimuovete la cover del case. 2 1 3. 4. 24 Rimuovete le quattro viti di supporto del piedistallo e conservatele per un eventuale utilizzo in futuro. Rimuovete il piedistallo. 4 3 Riposizionate la cover del case.
Rimuovete i quattro tappini di gomma che coprono i fori dei supporti nel pannello posteriore. Italiano 5. 5 6. Montate l'All-in-One PC usando un kit di montaggio standard (staffa a muro) e assicurandolo alle viti di montaggio. Seguite attentamente le istruzioni che trovate nel manuale di installazione del vostro kit di montaggio. IMPORTANTE! • Per una corretta ventilazione posizionate l'All-in-One PC ad una distanza di almeno 6cm dal muro.
Informazioni preliminari Italiano Collegamento di tastiera e mouse Collegate tastiera e mouse alle porte USB del pannello posteriore. Potete anche collegare tastiera e mouse alla porta USB del pannello laterale (sinistra) se il cavo non fosse sufficientemente lungo. Collegamento di tastiera e mouse senza fili 1. Installate le batterie nella tastiera e nel mouse senza fili. 2. Collegate il ricevitore wireless (dongle) ad una porta USB. 3. Potete iniziare ad usare la tastiera e il mouse senza fili.
Accensione dell'All-in-One PC Italiano Collegate l'adattatore AC fornito in dotazione all'ingresso DC-In presente sul pannello posteriore ( ) e poi premete il pulsante di accensione/spegnimento, che trovate sul lato destro ( ) dell'All-in-One PC, per accendere il sistema. 3 2 1 ATTENZIONE! NON collegate l'adattatore di alimentazione ad una presa di corrente AC prima di aver collegato l'uscita DC al sistema. Questa disattenzione potrebbe danneggiare l'adattatore AC/ DC.
Gesti Interattivi Italiano I gesti interattivi vi permettono di lanciare programmi ed accedere alle impostazioni del vostro All-in-One PC. Queste funzioni possono essere attivate tramite l'utilizzo di gesti particolari delle dita eseguiti sul display del vostro All-in-One PC. Uso di gesti interattivi Scivolamento dal lato sinistro Scivolamento dal lato destro Fate scivolare il dito dal lato sinistro verso l'interno per scorrere le applicazioni in esecuzione.
Zoom avanti Avvicinate le due dita tra di loro sullo schermo touch. Allontanate le due dita tra di loro sullo schermo touch. Toccare e tenere premuto Tocco/Doppio tocco • • • Italiano Zoom indietro • Per spostare un'applicazione selezionatela e trascinatela in un'altra posizione. Per chiudere un'applicazione cliccate e tenete premuta la parte superiore dell'applicazione in esecuzione e spostatela nella parte bassa dello schermo per chiuderla.
Italiano Configurazione dell'uscita audio tramite HDMI Se volete usare un TV ad alta definizione come dispositivo di riproduzione audio connettetelo all'All-in-One PC tramite un cavo HDMI e seguite questa procedura per configurare le impostazioni audio. Per configurare l'uscita audio su HDMI: 1. Dalla schermata di Start cliccate su Desktop per avviare la Modalità Desktop. NOTA: Per maggiori dettagli fate riferimento alla sezione Schermata di Start del capitolo Nozioni di Base su Windows® 8. 30 2.
Selezionate Stereo cliccate su Next (Avanti). 6. Selezionate Front left and right (Anteriore destro e sinistro) e cliccate su Next (Avanti). 7. Cliccate su Finish (Fine) per uscire dalla pagina di configurazione degli altoparlanti. All-in-One PC Serie ET2020 Italiano 5.
Capitolo 3: Nozioni di Base su Windows® 8 Italiano Requisiti di Sistema Processore 1GHz o superiore RAM 1GB (32-bit) o 2 GB (64-bit) Spazio sull'Hard Disk 16 GB (32-bit) o 20 GB (64-bit) Scheda video Compatibile Microsoft DirectX9 e con driver WDDM Risoluzione dello schermo 1024 x 768 per le applicazioni Windows® NOTA: 32 1366 x 768 per la funzione Snap Per aggiornamenti sui requisiti di sistema visitate il sito: http://www.windows.microsoft.
Italiano Procedura di inizializzazione (Per Windows® 8 e Windows® 8 Professional) Quando si avvia il computer per la prima volta apparirà una serie di schermate che vi guideranno nella configurazione delle impostazioni di base del sistema operativo Windows® 8. Per avviare il PC per la prima volta: 1. Premete il pulsante di accensione/spegnimento del vostro All-in-One PC. Attendete alcuni minuti sino alla comparsa della schermata di configurazione. 2.
Interfaccia utente Windows® Italiano Windows® 8 è caratterizzato da un'interfaccia utente a riquadri (UI). Include le seguenti funzionalità che potete usare mentre state lavorando con il vostro All-in-One. Schermata di Start La schermata di Start appare dopo aver effettuato l'accesso correttamente. Aiuta ad organizzare tutte le applicazioni che servono in un unico posto.
Italiano Applicazioni Windows® Queste applicazioni Windows sono aggiunte alla schermata Start e visualizzate in una disposizione a riquadri per un facile accesso. IMPORTANTE! Per eseguire le applicazioni Windows® è richiesta una risoluzione minima di 1024x768. NOTA: Alcune applicazioni richiedono l'inserimento dell'account Microsoft per lavorare al pieno della funzionalità. Hotspot Gli Hotspot sullo schermo vi permettono di lanciare programmi ed accedere alle impostazioni del vostro PC.
Hotspot sulla schermata di Start Italiano NOTA: Consultate la pagina seguente per la descrizione delle funzioni degli Hotspot.
Angolo inferiore sinistro Azione Posizionare il puntatore del mouse sull'angolo inferiore sinistro quindi cliccate sull'anteprima dell'applicazione in esecuzione per tornare a quella applicazione. Se avete avviato più di un'applicazione scorrete verso il basso per visualizzare tutte le applicazioni.
Nozioni di Base sulle applicazioni Windows® Italiano Per lanciare e personalizzare le vostre applicazioni utilizzate il touchscreen o la tastiera del vostro All-in-One PC. Lanciare le applicazioni Toccate un'applicazione per lanciarla. 1. Premete applicazioni. due volte e poi usate i tasti direzionali per scorrere tra le 2. Premete per lanciare l'applicazione desiderata. Personalizzare le applicazioni Potete spostare, ridimensionare, rimuovere applicazioni dal menu Start in uno dei seguenti modi:.
Chiudere le applicazioni Dalla schermata delle applicazioni in esecuzione premete Italiano Per chiudere un'applicazione cliccate e tenete premuta la parte superiore dell'applicazione in esecuzione e spostatela nella parte bassa dello schermo per chiuderla. . Accesso alla schermata Tutte le app Oltre alle App già presenti nella schermata di Start potete anche aprire altre applicazioni, come le App esclusive fornite da ASUS con il vostro All-in-One PC, tramite la schermata App.
Includere più applicazioni sulla schermata di Start Italiano Potete aggiungere più applicazioni alla schermata di Start usando il vostro touchscreen. 1. Nella schermata App spostate un'applicazione verso il basso per selezionarla e lanciare la barra delle impostazioni. 2. Toccate per aggiungere l'applicazione selezionata alla schermata di Start. Charm bar La Charm bar è una barra di strumenti che può essere attivata sul lato destro del vostro schermo.
All'interno della Charm bar Italiano Search (Ricerca) Questo strumento vi permette di cercare files, applicazioni o programmi all'interno del vostro All-in-One PC. Share (Condivisione) Questo strumento vi permette di condividere applicazioni tramite siti di social network o email. Start Questo strumento vi riporta alla pagina iniziale di Start. Dalla pagina di Start potete anche usarlo per richiamare un'applicazione avviata di recente.
Funzione Snap Italiano La funzione Snap consente di visualizzare sullo schermo due applicazioni in esecuzione, una affiancata all'altra, permettendovi di lavorare o passare tra le due applicazioni. IMPORTANTE! Assicuratevi che la risoluzione del vostro All-in-One PC sia 1366x768 o superiore prima di iniziare ad usare la funzione Snap. Barra di Snap Utilizzo di Snap Per attivare e utilizzare la funzione Snap utilizzando il touchscreen o la tastiera del vostro Allin-One PC procedete come di seguito:.
Altri tasti di scelta rapida \ Italiano Tramite la tastiera è inoltre possibile usare le seguenti combinazioni di tasti che vi aiuteranno a lanciare applicazioni e a navigare in Windows® 8.
Apre il Ease of Access Center (Centro Accessibilità) Italiano Apre il pannello di ricerca delle Settings (Impostazioni) Aprire il menu dei collegamenti rapidi Avvia la lente d'ingrandimento per ingrandire l'immagine sullo schermo Rimpicciolisce l'immagine sullo schermo Apre le Impostazioni dell'Assistente vocale Acquisisce uno screenshot della schermata corrente e lo salva nella cartella Immagini Spegnimento dell'All-in-One PC Per spegnere il vostro All-in-One PC eseguite una delle seguenti operazioni: 4
Italiano Capitolo 4: Connessione a Internet Leggete le e-mail, navigate sul Web e condividete applicazioni tramite i social network usando la connessione Wi-Fi o via cavo del vostro All-in-One PC. Configurazione di una connessione Wi-Fi in Windows® 7 1. 2. Cliccate l'icona di rete wireless con la stella arancione Windows®. Selezionate un access point wireless al quale volete connettervi e cliccate su Connect (Connetti) per creare la connessione.
Italiano Configurazione di una connessione di rete cablata con Windows® 7 IP Statico 1. Cliccate sull'icona di rete con un triangolo giallo di avviso nell'area di notifica di Windows® e selezionate Open Network and Sharing Center (Apri Centro Connessioni di Rete e Condivisione). NOTA: Assicuratevi di aver collegato il cavo di rete LAN all'All-in-One PC. 46 2. cliccate su Change Adapter Settings (Modifica Impostazioni Scheda) nel pannello di sinistra. 3.
Selezionate Internet Protocol Version 4 (TCP/IPv4) (Protocollo Internet Versione 4 (TCP/IPv4)) e poi cliccate su Properties (Proprietà). 5. Selezionate Use the following IP address (Utilizza il seguente indirizzo IP). 6. Inserite IP address (Indirizzo IP), Subnet Mask (Maschera di Sottorete) e Default Gateway. 7. Se necessario potete anche specificare l'indirizzo del server DNS preferito e del server DNS alternativo. All-in-One PC Serie ET2020 Italiano 4.
8. Italiano Dopo aver inserito i valori corretti cliccate su OK per completare la configurazione. IP Dinamico (PPPoE) 1. Ripetete i passaggi 1-4 del paragrafo precedente. 2. Selezionate Obtain an IP address automatically (Ottieni automaticamente un indirizzo IP) e cliccate OK. (Proseguite se state usando il protocollo PPPoE) 48 3.
Selezionate Broadband (PPPoE) (A banda larga (PPPoE)) e cliccate su Next (Avanti). 6. Inserite User name (Nome Utente), Password e Connection name (Nome della connessione). Cliccate su Connect (Connetti). 7. Selezionate Close (Chiudi) per terminare la configurazione. All-in-One PC Serie ET2020 Italiano 5.
Cliccate sull'icona di rete nell'area di notifica e cliccate sulla connessione che avete appena creato. 9. Inserite User name (Nome Utente) e Password. Cliccate su Connect (Connetti) per connettervi a Internet. Italiano 8.
1. Italiano Configurazione di una connessione Wi-Fi in Windows® 8 Attivare la Charm Bar dalla schermata Start o da una qualunque altra applicazione. NOTA: Per maggiori dettagli fate riferimento al paragrafo Charm Bar in Nozioni di Base sulle applicazioni Windows®. Charm Bar 2. Dalla Charm Bar selezionate Settings (Impostazioni) e cliccate sull'icona di rete 3. Selezionate dalla lista la rete alla quale volete connettervi. 4. Cliccate su Connect (Connetti). .
Connessione a reti cablate Italiano 1. Usate un cavo di rete (RJ-45) per connettere il vostro All-in-One PC ad un modem ADSL o ad una rete locale (LAN). 2. Accendete il PC. 3. Configurate le impostazioni necessarie per la connessione ad Internet. NOTE: • Per maggiori dettagli fate riferimento alle sezioni Configurazione di una connessione di rete PPPoE con indirizzo IP dinamico o Configurazione di una connessione di rete con indirizzo IP statico.
Sulla Barra delle Applicazioni di Windows cliccate con il tasto destro sull'icona di rete poi selezionate Open Network and Sharing Center (Apri Centro Connessioni di Rete e Condivisione). 3. Dalla schermata Open Network and Sharing Center (Apri Centro Connessioni di Rete e Condivisione) cliccate su Change Adapter Settings (Modifica Impostazioni Scheda). 4. Cliccate con il tasto destro su Connessione alla rete locale (LAN) e poi selezionate Properties (Proprietà). 5.
Tornate alla finestra Network and Sharing Center (Centro Connessioni di Rete e Condivisione) e selezionate Set up a new connection or network (Configura nuova connessione o rete). 8. Selezionate Connect to the Internet (Connessione a Internet) e poi Next (Avanti). 9. Selezionate Broadband (PPPoE) (A banda larga (PPPoE)) e cliccate su Next (Avanti). Italiano 7. 10. Inserite i vostri Username (Nome Utente), Password e Connection name (Nome connessione). Cliccate su Connect (Connetti). 11.
Configurazione di una connessione di rete con indirizzo IP statico 1. Ripetete i passaggi da 1 a 4 della sezione Configurazione di una connessione di rete PPPoE con indirizzo IP dinamico. 2. Selezionate Use the following IP address (Utilizza il seguente indirizzo IP). 3. Inserite IP address (Indirizzo IP), Subnet Mask (Maschera di Sottorete) e Default Gateway forniti dal vostro ISP (Internet Service Provider). 4.
Capitolo 5: Ripristino del Sistema Italiano Entrare nelle Impostazioni del BIOS Nel BIOS (Basic Input and Output System) sono salvate le impostazioni hardware del sistema necessarie per l'avvio del vostro PC. Le impostazioni standard del BIOS si applicano alla grande maggioranza dei casi per garantire prestazioni ottimali.
Usare la Partizione di ripristino su Windows® 7 1. Premete durante l'avvio del PC. 2. Quando comparirà selezionate l'opzione Windows Setup [EMS Enabled] e premete [Invio]. 3. Selezionate la lingua e cliccate su Next (Avanti). 4. Selezionate Recover the OS to the Default Partition e cliccate su Next (Avanti). 5. Sarà visualizzata la partizione predefinita. Cliccate su Next (Avanti). 6. I dati sulla partizione predefinita verranno cancellati.
5. Italiano A seconda della situazione di cui al passaggio precedente saranno cancellati i dati sul dispositivo di archiviazione USB o sulla partizione selezionata. Cliccate Backup per avviare il processo di backup. IMPORTANTE! Tutti i dati sul dispositivo di archiviazione USB o sulla partizione selezionata saranno cancellati. Assicuratevi di aver fatto una copia dei vostri dati. 6. Al termine del processo di backup delle impostazioni predefinite cliccate su Reboot (Riavvia).
Reset del vostro All-in-One PC in Windows® 8 Italiano Usate Reset your PC (Reimposta il PC) per ripristinare il vostro PC alle impostazioni predefinite di fabbrica. IMPORTANTE! Fate un backup dei vostri dati prima di procedere con questa operazione. Per reimpostare il vostro All-in-One PC 1. Se il vostro All-in-One PC è spento premete il pulsante di accensione/spegnimento per accendere l'All-in-One PC.
Italiano Ripristino da un file immagine di sistema in Windows® 8 Potete creare un'unità di ripristino USB e utilizzarla in seguito per ripristinare le impostazioni del PC. Creazione di un'unità di ripristino USB ATTENZIONE! Durante il processo saranno cancellati, in modo permanente, tutti i file contenuti nel dispositivo di archiviazione USB. Assicuratevi di aver fatto una copia dei vostri dati prima di procedere. Per creare un'unità di ripristino USB: 1.
Cliccate su Create (Crea). Aspettate il completamento del processo. 8. Quando il processo è terminato cliccate su Finish (Fine). Italiano 7. Rimuovi tutto e reinstalla Windows® 8 Il ripristino del PC alle impostazioni di fabbrica può essere fatto mediante l'opzione Remove everything and reinstall Windows (Rimuovi tutto e reinstalla Windows) nella schermata PC Settings (Impostazioni PC). Per utilizzare questa opzione fate riferimento alle istruzioni qui di seguito:.
Italiano Comunicazioni Appendice Comunicazione REACH Nel rispetto del regolamento REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) le sostanze chimiche contenute nei prodotti ASUS sono state pubblicate sul sito web ASUS REACH: http://csr.asus.com/english/REACH.htm Servizio di ritiro e riciclaggio ASUS Il programma di ritiro e riciclaggio dei prodotti ASUS deriva dal costante impegno aziendale a raggiungere i più elevati standard di protezione ambientale.
• Riorientate o riposizionate l’antenna ricevente. Aumentate la distanza tra il dispositivo e il ricevitore. Collegate l'apparecchio ad una diversa presa di corrente in modo che apparecchio e ricevitore si trovino su circuiti diversi. Consultate, per richiedere assistenza, il rivenditore o un tecnico radio/TV qualificato.
Dichiarazione di Conformità (Direttiva R&TTE 1999/5/EC) Italiano Sono stati soddisfatti i seguenti requisiti considerati rilevanti e sufficienti per la direttiva R&TTE (Radio & Telecommunications Terminal Equipment): • • • • • • • Requisiti essenziali [Articolo 3] Requisiti di protezione per la salute e sicurezza [Articolo 3.1a] Test per la sicurezza elettrica [EN 60950] Requisiti di protezione per la compatibilità elettromagnetica [Articolo 3.
Italiano NON DISASSEMBLARE La garanzia non si applica ai prodotti disassemblati dagli utenti Avvertenza sulla batteria agli Ioni di Litio AVVERTENZA: Pericolo di esplosione se la batteria è sostituita in modo errato. Sostituire solo con un tipo uguale o equivalente consigliato dal produttore. Smaltite le batterie usate attenendovi alle istruzioni fornite dal produttore. Nessuna esposizione ai liquidi NON esponete a liquidi, pioggia o umidità. Il prodotto non è resistente ad acqua e agli olii.
Italiano Dichiarazione di conformità con le normative internazionali in materia di tutela ambientale ASUS, durante la progettazione e realizzazione dei suoi prodotti, rispetta il concetto del “Green Design” (Progettazione Verde) e si assicura che tutte le fasi produttive siano in linea con le normative internazionali sull'ambiente. Inoltre, ASUS, mette a conoscenza del pubblico le informazioni sulla conformità con le disposizioni in vigore nei vari paesi del mondo. Consultate la pagina web http://csr.asus.
Italiano Certificazione ENERGY STAR ENERGY STAR è un programma congiunto dell'agenzia americana per la protezione ambientale (U.S. Environmental Protection Agency) e del ministero statunitense per l'energia (U.S. Department of Energy) che mira a proteggere l'ambiente attraverso l'impiego di prodotti ecologici più efficienti dal punto di vista energetico.
Italiano Produttore: Rappresentante autorizzato in Europa: 68 ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Indirizzo: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN ASUSTeK Computer GmbH Indirizzo: HARKORT STR.