華碩 電腦 使用手冊 ET232 系列 ET2321I ET2322I
T9051 2.00 版 2014 年 4 月發行 版權說明 ©ASUSTeK Computer Inc. All rights reserved.
目錄 關於本使用手冊................................................................................... 5 本手冊使用的慣例...................................................................... 6 圖示................................................................................................ 6 字型................................................................................................ 6 安全性須知............................................................................................ 7 建立系統.............................
目錄 開始畫面.....................................................................................28 Windows® 應用程式..................................................................28 熱點..............................................................................................29 開始按鈕.....................................................................................31 個人化開始畫面........................................................................33 使用 Windows® 應用程式處理工作..........................................
關於本使用手冊 本使用手冊提供您關於 All-in-One 電腦的硬體資訊與軟體功能,內容則是 由下面幾個章節所組成: 第一章:硬體設定 本章節介紹關於 All-in-One 電腦上各硬體元件的功能與說明。 第二章:使用您的 All-in-One 電腦 本章節提供您 All-in-One 電腦的各項使用資訊。 第三章:使用 Windows® 8.1 系統 本章節概觀介紹如何在 All-in-One 電腦上面使用 Windows® 8.
本手冊使用的慣例 為了強調手冊中的重要訊息,訊息說明會以下列方式呈現: 重要!本訊息包含必須遵守才能完成工作的重要訊息。 說明:本訊息包含助於完成工作的額外訊息與提示。 警告!本訊息包含在特定工作時必須遵守以維護用戶安全以及避免 造成華碩 All-in-One 電腦資料與組件毀損的重要資訊。 圖示 下列圖示分別表示可以用在華碩 All-in-One 電腦上完成所有工作的不同裝 置。 = 使用觸控螢幕 = 使用鍵盤 字型 粗體 = 代表必須選取的選單或項目。 斜體 = 代表您可以參考在本手冊裡的章節。 在本手冊中所有的產品圖與軟體圖片僅供參考,請依您實際的產品規格與軟 體畫面為主。請隨時造訪華碩網站:tw.asus.
安全性須知 華碩 All-in-One 電腦 ET232 系列為經過設計與測試以符合最新安全標準的 資訊技術設備。然而,為確保您的安全,在使用本產品前,請詳閱以下的 安全操作說明。 建立系統 • • • • 在您使用本系統前,請先閱讀並依照使用手冊上的說明操作。 請勿將本產品放置在容易受潮或有發熱源(如散熱器附近)的位置。 請將本產品放置在平穩的地方。 機殼上有開孔之處請保持通風,請不要阻擋或遮蓋這些開孔,以確保在本 系統周圍的空間距離能保持通風。也請不要拿任何物件塞入這些通風孔。 • 本產品的建議操作環境之溫度為介於 0℃ 至 40℃ 之間。 • 若您使用電源延長線,請確認安裝在延長線上所有裝置的總使用安培數 不會超過其額定功率。 使用注意事項 ‧ 請不要在電源線上走動,或將任何東西壓在電源線上。 ‧ 請不要讓水或任何液體濺到本產品。 ‧ 當系統關機後,仍有極小的電流流通,若要清理系統,請記得先將所 有電源、數據機與網路線從插座上拔除。 • 為了讓螢幕保持較佳的觸控感應能力,每隔一段時間需要進行清潔的 動作,隨時保持螢幕的清潔,以避免外來或過度的灰塵堆積。請依照 以下的方式清潔螢幕: • 關閉系
聲壓 警告:從耳機或頭戴式耳機上輸出過高的音量可能會導致聽力受損或喪 失。請注意盡量不要將音量控制與平衡器調整在中間值以上,如此可能會 導致耳機或頭戴式耳機的聲壓輸出增大,而造成聽力有所影響。 TV 選台器(選配) 注意:要安裝有線電視系統,在此提醒 CATV 系統安裝者的安裝程式須注 意第 820-93 國家電器規範,以提供適當的接地準則。尤其是指定屏蔽的同 軸電纜連接到接地系統的建物作為靠近點在實際的纜線入口。 變壓器 1. 變壓器資訊: 輸入電壓:100–240Vac 輸入頻率:50–60Hz 額定輸出電流:90W(19V, 4.74A) 額定輸出電壓:+19Vdc 2.
包裝盒內容物 ET2321I ET2322I ET2321I ET2322I All-in-One 電腦 ET232 系列、底座與螺絲 有線 / 無線鍵盤(選配) 有線/無線滑鼠(選配) 電源線 電源變壓器 TV 接收器(選配) 保固卡 USB 介面 KBM 接收器(選配) ABC GHI Guide MNO 5 6 TUV 7 8 * 0 CLEAR R 3 JKL 4 Quick DEF 2 1 PQRS WXYZ 9 # ENTER G Y B T 重低音喇叭(選配) 快速使用手冊 遙控器(選配) 說明:以上的鍵盤、滑鼠、遙控器、電源變壓器與 USB 介面 KBM 接收器等圖示僅供參考,實際的產品樣式會因您所在地區而可能會 有不同的搭配。 AII-in-One 電腦 ET232 系列 9
第一章:硬體設定 認識您的 All-in-One 電腦 前視圖 ET2321I ET2322I 10 AII-in-One 電腦 ET232 系列
麥克風(內建) 內建的麥克風可以讓您搭配攝影機鏡頭使用視訊連線傳輸聲音、或語 音解說、錄音與搭配多媒體應用程式時使用。 攝影機鏡頭 內建的攝影機鏡頭可以讓您搭配麥克風使用視訊連線。 攝影機鏡頭指示燈 當內建的攝影機鏡頭啟動時會亮燈顯示。 數位麥克風(選配) 這組數位麥克風可以讓您搭配攝影機鏡頭使用視訊連線傳輸聲音、或 語音解說、錄音與搭配多媒體應用程式時使用。 說明: . 這組麥克風僅部分機種選配。 . 這些選配機種,支援 Beam Forming。 遙控器接收器 此為使用選配的遙控器進行遙控控制時的接收器。 說明:遙控器接收器僅在選配 TV 選台器的機種上才有提供。 觸控螢幕(選配) 這個 23 吋的觸控螢幕提供 16:9 寬螢幕 IPS 面板,並且支援 full HD 1920 x 1080 顯示解析度,而觸控功能並提供 10 點觸控,可讓您透過 指尖操作享受數位生活。 硬碟指示燈 當亮燈時表示硬碟正在運作。 電源指示燈 當亮燈時表示電源已開啟。 AII-in-One 電腦 ET232 系列 11
後視圖 天線連接埠(選配) 本天線連接埠為提供 TV(電視)頻率訊號接收,連接標準的室內或室 外天線,便可以接收數位電視訊號。 說明:這組連接埠僅在具備 TV 選台器的機種上才有提供。 電源輸入接頭 電源變壓器可以將 AC 電源轉換為 DC 電源,轉換的電源透過電源輸入 接頭提供電力給您的電腦,為了避免損害電腦,請使用電源變壓器。 警告!當電源正在使用中,電源變壓器的溫度可能會變熱,請勿將 電源變壓器覆蓋或放置靠近您的身體。 網路連接埠 這個 RJ-45 網路埠支援標準乙太網路線連接至區域網路。 12 AII-in-One 電腦 ET232 系列
HDMI 輸入埠 HDMI(高畫質多媒體介面)為一個非壓縮採全數位音效/影像介面,可 以與任何的影音裝置來源連接,如:數位機上盒、DVD 播放機。 HDMI 輸出埠 可以透過 HDMI 訊號線連接此埠,並將另一端連接至具有 HDMI 輸入 埠的裝置,如 LCD 螢幕或投影機做輸出。 USB 3.0 連接埠 此通用序列匯流排(USB 埠)傳輸率可高達 5Gbit/s 且向下相容 USB 2.0。 此連接埠也可搭配 AI Charger II 功能,提供您快速將相容的裝置充電。 若要在 All-in-One 電腦上啟用 AI Charger II,請選擇 ASUS Manager > Power > AI Suite II > AI Charger II 後,選擇 Enable(啟用)。 說明:依照以下方式可進入 ASUS Manager(華碩管理者程式) . 使用滑鼠左鍵雙按桌面右下角工具列上的 ASUS Manager 圖示。 . 從桌面上的 ASUS Launcher,進入 ASUS Launcher > System > ASUS Manager。 USB 3.
底視圖(未安裝底座) USB 2.0 連接埠 此通用序列匯流排(USB 埠)提供具備 USB 2.0或 1.
選單向下鍵 當調整選單設定時,按下此鍵可以向下移動選擇選單裡的項目。您也 可以使用這個按鍵來降低該項目裡的數值,如亮度、對比度、音量等 等。 MENU(選單)鍵 按下此鍵可顯示選單。當顯示 OSD 選單時,輕觸此鍵可以進入/選擇各 項功能。 選單向上鍵 當調整選單設定時,按下此鍵可以向上移動選擇選單裡的項目。您也 可以使用這個按鍵來增加該項目裡的數值,如亮度、對比度、音量等 等。 電源開關 提供您開啟或關閉系統。 喇叭 內建的立體聲喇叭系統可以讓您不需外接喇叭,即可聆聽音效。這個 音效設定功能為透過 All-in-One 電腦裡的軟體控制。 AII-in-One 電腦 ET232 系列 15
右視圖 光碟機手動退片插孔 當按下光碟機上的電動退片按鈕而托盤無任何退片動作時,可以透過 這個手動的退片插孔,使用迴紋針插入後將托盤從光碟機內退出。 警告!僅當按下光碟機上面的電動退片鈕無動作時,才使用此手動 退片插孔進行退片。 光碟機退片鈕 按一下可以讓光碟機的托盤退出。 您也可透過播放軟體退出托盤,或使用滑鼠右鍵點選 Windows 作業系 統“電腦”裡的光碟機圖示,並選擇下拉選單中的“退出”。 光碟機 內建的光碟機可支援標準 CD、數位影音 DVD 或藍光光碟,部份機型 可能具備寫(R)或覆寫(RW)的功能。關於這部份,請參考產品型 錄或官網上的詳細規格中,有關各機型所支援的光碟機類型說明。 16 AII-in-One 電腦 ET232 系列
第二章:使用您的 AII-in-One 電腦 安裝 AII-in-One 電腦的底座 1. 2. 請將 AII-in-One 電腦放置在平 坦的桌面上。 將底座上的安裝孔對準支架置 入。 螺絲 底座 支架 說明:底座上的安裝孔僅能 以一個方向裝入支架。 3. 從底座底部,使用十字螺絲起 子,鎖上隨附的螺絲,或者您 也可以使用銅板或代幣來將螺 絲鎖入底座。 說明:以上的安裝圖示僅供參考,實際使用的底座可能會因 AiO 機 種的不同而在搭配上也有所不同,但安裝步驟是相同的。 擺放您的 AII-in-One 電腦 1. 2.
啟動您的 AII-in-One 電腦 連接有線鍵盤與滑鼠 將鍵盤與滑鼠連接線連接至電腦後側面板上的 USB 連接埠。 連接無線鍵盤與滑鼠 1. 2. 3.
連接電源變壓器與開機 將電源變壓器連接至後端面板上的 DC IN 插孔( 在前面板右側的電源開關( )以進行開機。 ),然後按下位 警告!請勿在 AC 電源變壓器連接至系統上的 DC 插孔之前,先將 電源線連接至 AC 插座,這麼做可能會導致 AC-DC 變壓器的損壞。 說明:若要了解如何將 All-in-One 電腦關機,請參考在使用 Windows® 8.
使用 OSD 選單 當您這樣做時,在螢幕上會顯示 OSD 選單: 1. 按下前面板上的 MENU(選單)鍵。 2. 將 HDMI 訊號線連接至後側面板的 HDMI 輸入連接埠。 OSD 功能說明 當按下前面板上的 MENU(選單)鍵時,會顯示 OSD 選單。若要選擇 OSD 功能項目或調整 OSD 設定,請按 Menu up 或 Menu down(選單上 / 下) 鍵。若要啟用選擇的功能,請按 MENU(選單)鍵。 說明:請參考本手冊 認識您的 All-in-One 電腦 的內容,以了解前 面板按鈕的相關位置。 Panel Off(關閉螢幕) 這個功能提供您切換顯示功能。 Color(色彩) • Brightness(亮度):調整範圍是從 0 至 100。 • Contrast(對比):調整範圍是從 0 至 100。 • Color Temp.
System Setup(系統設定) • OSD 設定: 1. 水平位置(H-Position)- 調整 OSD 選單的水平位置。 2. 垂直位置(V-Position)- 調整 OSD 選單的垂直位置。 3. 調整 OSD 停止時間從 10 至 120 秒。 4.
觸控功能 您可以在 All-in-One 電腦的觸控螢幕上,使用觸控功能並通過手指移動以 執行應用程式或進行設定。 使用觸控功能 由左滑動 由右滑動 一隻手指於觸控板上左邊緣向右 滑動以開啟執行中的應用程式。 一隻手指於觸控板上右邊緣向左 滑動以開啟常用工具列。 向下滑動 滑動 ‧一 隻手指於開始畫面向下滑 動,可以查看所有應用程式。 ‧ 在 應 用 程 式 一 隻 手 指 向 下 滑 動,可以查看選單。 手指上下滑動可上下滾動畫面, 或是可以左右移動畫面。 22 AII-in-One 電腦 ET232 系列
縮小 放大 將兩隻手指拉近來縮小畫面。 將兩隻手指拉遠來放大畫面。 點選/雙按 點選並長按 ‧ 點選以執行應用程式。 ‧ 於 桌面模式時,點選兩下以 執行項目。 ‧請 點選並長按應用程式名稱, 然後拖曳至新的位置。 ‧ 點選並長按執行中應用程式的 頂端後,向下拖曳可以關閉執 行中的應用程式。 AII-in-One 電腦 ET232 系列 23
向上滑動 向下滑動 從開始畫面向上滑動,可以開啟 應用程式畫面。 從應用程式畫面向下滑動,可以 返回開始畫面。 24 AII-in-One 電腦 ET232 系列
透過連接 HDMI 裝置設定音效輸出 若您想要使用高畫質電視(HDTV)做為音效輸出裝置,請將其與家用劇院 級 PC 連接,並依照以下的步驟設定音效。 透過 HDMI 裝置設定音效輸出 1. 從開始畫面中,點選 Desktop(桌面)並開啟 Desktop Mode(桌面模 式)。 說明:請參考在使用 Windows® 8.1 系統章節中有關 開始畫面 的說 明。 2. 用滑鼠右鍵點選位於桌面右下角工具列上 的混音器(喇叭)圖示,然後選擇 播放裝 置。 3. 再從 播放 選單中,選擇 NVIDIA HDMI Out(Port 0)。 點選 設定 後顯示喇叭設定選 單。 4.
5. 選擇 立體聲 後點選 下一步。 6. 勾選 前左方和前右方 項目,點 選 下一步 繼續。 點選 完成 後,離開音效設定選 單。 7.
第三章:使用 Windows® 8.1 系統 首次使用時 當您第一次啟動電腦時,Windows® 8.1 作業系統會顯示一系列的畫面,引 導您依照步驟進行個人化基本設定。 請依照以下步驟進行初始化設定: 1. 2. 3. 按下 All-in-One 電腦上的電源按鈕,稍候幾分鐘,直到顯示設定畫面。 選擇 All-in-One 電腦顯示的語言。 仔細閱讀使用者授權同意書後,勾選 I accept the terms for using Windows, 然後點選 Accept(同意)。 4. 依照畫面上的提示設定以下的基本項目: ‧ Personalize(個人化) ‧ Wireless(無線連線) ‧ Settings(設定) ‧ Sign in(登錄) 5. 當您完成基本項目設定時,Windows® 8.1 說明畫面即會顯示,可以讓 您從中瞭解更多關於 Windows® 8.1 的功能。 6. 在您成功登入使用帳戶後,則會顯示開始畫面。 Windows® 8.1 鎖定畫面 當您在華碩 All-in-One 電腦要進入 Windows® 8.
Windows® 使用者介面 Windows® 使用者介面(UI)是指 Windows® 8.
熱點 畫面上的熱點提供您執行程式並存取電腦設定。這些功能可以使用滑鼠啟 動。 程式執行中的熱點 開始畫面的熱點 AII-in-One 電腦 ET232 系列 29
熱點 動作 左上角 移動您的滑鼠游標然後點按最近使用的應用程式 縮圖以返回該應用程式。 如果您執行一個以上的應用程式,向下滑動以顯 示所有執行中的應用程式。 左下角 從一個執行中的應用程式畫面: 移動您的滑鼠游標然後點按開始畫面的縮圖 以返回開始畫面。 說明:您也可按下在鍵盤上的 Windows 按鍵 ,便能返回至開始畫面。 從開始畫面: 移動您的滑鼠游標至左下角,然後點按此縮圖 以返回該應用程式。 頂端 移動您的滑鼠點按直到變成一個手掌圖示,可以 拖曳該應用程式至新的位置。 說明:這項功能僅在當執行應用程式或當 您想使用子母畫面(Snap)功能時才會 運作。如要瞭解更多細節,請參考使用 Windows 應用程式處理工作中的子母畫面 (Snap)功能。 右上與右下角 30 移動您的滑鼠游標以執行 Charms bar(常用工具 列)。 AII-in-One 電腦 ET232 系列
開始按鈕 Windows® 8.
桌面模式下的開始按鈕 內容功能表(Context menu) 當您使用滑鼠在開始按鈕上點按右鍵時,內含 Windows® 8.
個人化開始畫面 Windows® 8.1 也可以讓您個人化開始畫面,不但可以設定開機直接進入桌面 模式,並可個人化應用程式在螢幕上的排列位置。 請依照以下的方式個人化開始畫面: 1. 開啟至桌面。 2. 在下方工作列上除了開始按鈕處之外的任一處,使用滑鼠右鍵點選以 開啟下拉視窗。 3. 點選 內容 然後選擇 工作列與瀏覽內容 選單裡的 瀏覽,並勾選您想使用 的項目。 4.
使用 Windows® 應用程式處理工作 使用 All-in-One 電腦的觸控板或鍵盤以執行並個人化您的應用程式。 執行應用程式 用手指點選應用程式後開啟。 1. 按下 鍵兩次然後使用方向鍵透過應用程式瀏覽。 2. 按下 鍵以執行所選應用程式。 個人化應用程式 請依照下列說明從開始畫面移動、重設大小或取消釘選的應用程式。 移動應用程式 點按應用程式,然後將其拖曳至新位置。 重設應用程式大小 點按應用程式圖示以開啟其設定列,然後點按 用程式圖示的大小。 圖示以調整應 取消釘選應用程式 點按應用程式圖示以開啟其設定列,然後點按 選的應用程式。 圖示取消釘 關閉應用程式 1. 點 按頂端正在執行的應用程式,然後拖曳並放至畫面底部以關閉 程式。 2.
存取所有程式 除了已經釘選在開始畫面的應用程式之外,您也可以在所有應用程式的畫 面中開啟其他應用程式,像是華碩 All-in-One 電腦隨附的華碩獨家軟體應 用程式。 說明:應用程式畫面中顯示的應用程式僅供參考,可能會因所在地 區而有所不同,請依實際出貨為準。 AII-in-One 電腦 ET232 系列 35
執行所有應用程式畫面 使用 All-in-One 電腦的觸控板或鍵盤開啟應用程式畫面。 .點選開始畫面並向下滑動以開啟應用程式畫面。 .在開始畫面中點選 在開始畫面中按下 按鈕。 後按下 鍵。 釘選更多應用程式至開始畫面 您可以使用觸控板在開始畫面中釘選更多的應用程式。 1. 開啟應用程式畫面。 36 2.
常用工具列(Charms bar) 常用工具列(Charms bar)是一個可以釘選至您螢幕右側的工具列。它包含幾 個可讓您分享程式以及提供快速存取華碩 All-in-One 電腦個人化設定的工具。 常用工具列(Charms Bar) 執行常用工具列(Charms bar) 說明:當常用工具列(Charms bar)出現後,一開始會以一組白色 圖示顯示。常用工具列(Charms bar)啟動後的畫面如上圖所示。 使用華碩 All-in-One 電腦的觸控板或鍵盤以執行常用工具列(Charms bar)。 移動游標至畫面右側。 按下 AII-in-One 電腦 ET232 系列 鍵。 37
常用工具列(Charms bar)功能說明 搜尋 可讓您尋找華碩 All-in-One 電腦中的檔案或應用程式。 分享 可讓您透過社群網站或電子郵件分享程式。 開始 可返回至開始畫面。從開始畫面中您也可以使用此功能以返 回最近開啟的應用程式。 裝置 可讓您與連接至華碩 All-in-One 電腦的裝置存取與分享檔 案,像是外接螢幕或是印表機。 設定 可讓您進行華碩 All-in-One 電腦的設定。 38 AII-in-One 電腦 ET232 系列
子母畫面功能 使用子母畫面(Snap)功能可讓您在華碩 All-in-One 電腦上同時執行兩個 應用程式。此功能一旦啟動之後,便會將您的螢幕分割為兩個畫面。 重要!要使用子母畫面功能需要解析度至少 1366 x 768 像素的螢 幕。 子母畫面分割列 啟動子母畫面功能 使用華碩 All-in-One 電腦的觸控螢幕或鍵盤以啟動子母畫面功能。 1. 執行想要進行放入子母畫面的應用程式。 2. 點選並按住應用程式,將應用程式拖曳放至螢幕畫面的右側或左 側。 3. 開啟其他應用程式。 1. 執行您想要進行子母畫面的應用程式。 與左方向鍵或右方向鍵將應用程式放入左或右子母畫 2. 按 下 面裡。 3.
功能組合鍵 若是搭配鍵盤,您也可以使用以下的組合鍵來快速開啟應用程式與瀏覽 Windows® 8.
開啟“簡易存取中心”。 開啟“搜尋設定”視窗。 開啟“開始”按鈕的“內容功能表”。 啟動放大鏡圖示以放大畫面。 縮小畫面。 開啟“朗讀程式”設定。 關閉華碩 All-in-One 電腦 請選擇以下任一方式,即可將華碩 All-in-One 電腦關機。 ‧ 從 常用工具列(Charms bar)點選 可以執行一般正常關機。 ‧ 從登入(log-in)畫面中,點選 後再點選 > 關機 就 > 關機。 ‧ 若 您的華碩 All-in-One 電腦未有回應,請按住電源按鈕至少 4 秒鐘直到華碩 All-in-One 電腦關機。 將華碩 All-in-One 電腦進入休眠模式 請依照以下步驟,在華碩 All-in-One 電腦或華碩可攜式 AiO 電腦使用以下 的任一方式進入休眠模式: • 按下電源按鈕一次。 • 開啟桌面模式,然後按下 + 鍵以開啟 關機 視窗,從下拉式 選單中選擇 休眠,然後點選 確認。 AII-in-One 電腦 ET232 系列 41
第四章:連線至網路 使用 Windows® 8.1 的 Wi-Fi 連線 您可以設定無線/ Wi-Fi 或有線連線方式,讓電腦可以存取電子郵件,上網瀏 覽網頁,或是透過社群網站共享應用程式。 1. 從開始畫面或從任一應用程式模式下開啟常用工具列(Charms bar)。 說明:請參考使用 Windows® 應用程式處理工作內容中關於常用工 具列(Charms bar)的說明。 2. 再從常用工具列(Charms bar)中選擇 設定 後點選網路圖示 3. 4. 從清單中選擇您想要連線的無線網路。 點選 連線。 。 說明:您可能會被要求輸入安全密碼以啟動 W-Fi 無線網路連線。 設定 Wi-Fi 頻寬(bandwidth) 請依照以下步驟設定 Wi-Fi 頻寬: 1. 2. 3.
4. 5. 6. 7.
在 Windows® 8 設定有線網路連線 請依照以下方式設定有線網路的連線: 1. 2. 3. 使用一條(RJ-45)網路線,將一端連接至 All-in-One 電腦的網路埠, 然後另一端則連接至 DSL/纜線數據機或一個區域網路。 將電腦開機。 依照螢幕上的提示,進行必要的網路連線設定。 說明: ‧ 如要了解更多細節,請參考接下來 設定動態的 IP/PPPoE網路連 線 或 設定固定 IP 網路連線 的說明。 ‧ 請聯絡您的網際網路服務供應商(ISP)以取得提供連線用的帳 號與密碼,才能設定您的網際網路連線。 設定動態 IP/PPPoE 網路連線 請依照以下方式設定動態 IP/PPPoE 網路連線: 1. 從開始畫面中,點選 桌面 後開啟桌面模式。 2. ,然後點選以 在 Windows® 工具列上,使用滑鼠右鍵點選網路圖示 開啟 網路和共用中心。 從 網路和共用中心 選單裡,點選 變更介面卡設定。 使用滑鼠右鍵點選您的網路,然後點選擇 內容。 點選 網際網路通訊協定第 4 版(TCP/IPv4),然後點選 內容。 點選 自動取得 IP 位址 後,再點選 確定。 3. 4. 5. 6.
設定固定 IP 網路連線 請依照以下方式設定固定 IP 網路連線: 1. 2. 3. 4. 5. 請先依前面 動態 IP/PPPoE 網路連線 的設定步驟 1~4 操作。 選擇 Use the following IP address(使用下列的 IP 位址)。 然後,再輸入網際網路服務供應商(ISP)提供連線用的 IP 位址、子網 路遮罩 與 預設閘道。 若是有需要,再輸入慣用 DNS 伺服器位址 與 其他 DNS 伺服器位址。 當您完成輸入後,點選 確定 完成建立。 設定藍牙連線 AII-in-One 電腦具備藍牙技術,無需纜線即能連接藍牙功能的裝置。具有藍 牙功能的裝置,可能為筆記型電腦、桌上型電腦與行動電話等。 說明:若您的 AII-in-One 電腦無內建藍牙,則需要連接 USB 藍牙模 組才能使用藍牙功能。 在 Windows® 8.1 系統下新增藍牙裝置: 1.
2. 再點選 Add a Bluetooth device( 新增藍牙裝置),以搜尋可用 的藍牙裝置。 3. 從電腦設定視窗中,點選 Add a device(新增裝置)以尋找想要 連線配對的藍牙裝置。 4. 從清單中選擇藍牙裝置,並點 選 Next(下一步)繼續。 5.
第五章:還原您的系統 進入 BIOS 設定程式 BIOS(Basic Input and Output System)為儲存系統的硬體設定,提供電腦啟 動時所需要的設定。 在正常的情況下,預設的 BIOS 設定通常適用於大多數使用情況下,以確保 最佳的效能。若您發生以下的情況,才需要進行變更 BIOS 設定: ‧ 在系統開機時顯示錯誤提示訊息,並且要求您執行 BIOS 設定程式。 ‧ 您已經安裝一個新的系統組件,而需要進一步做 BIOS 設定程式或更 新。 警告!不正確的 BIOS 設定可能會導致不穩定或開機失敗。如有此需 求時,強烈建議尋求專業的產品技術人員來進行變更 BIOS 設定。 快速進入 BIOS Windows® 8.
還原您的系統 重新設定您的 All-in-One 電腦 使用 Reset your PC 選項可以將您的電腦還原至出廠預設值。 重要!請在進行還原前,先將您電腦內重要的檔案進行備份。 請依照以下方式重新設定您的 All-in-One 電腦: 1. 當開機時按下 鍵。 重要!如要通過 POST(開機自我測試)過程,請參考第五章關於 快速進入 BIOS 任一個方式操作。 2. 3. 4. 5. 6. 7.
使用系統映像檔還原 您可以建立一個 USB 還原碟,然後使用它來將 All-in-One 電腦進行還原。 建立一個 USB 還原碟 警告!當您要進行建立 USB 還原碟時,所有儲存在您所選擇的 USB 儲存裝置內的資料也會同時被刪除,請先確認您已經將重要資料進 行備份後再執行。 請依照以下方式建立 USB 還原碟: 1. 從 All Apps(所有程式)畫面中開啟 Control Panel(控制台)。 說明:如欲了解更多細節,請參閱 使用 Windows® 應用程式處理工 作 裡的 執行應用程式 的說明。 2. 3. 4. 接著從 Control Panel's System and Security(控制面板的系統與安全) 項目中,點選 Find and fix problems(尋找與解決問題)。 選擇 Recovery(還原) > Create a recovery drive(建立還原驅動磁碟)。 點選 Next(下一步)繼續。 說明:若勾選框未勾選,則在回復裝置裡不會安裝驅動與應用程式。 5. 6. 7. 8.
移除所有檔案與重新安裝 Windows® 安 將您的電腦還原至原始出廠的預設值狀態時,會移除所有的檔案內容,並 且重新安裝選項在電腦設定裡,請參考以下的方式以使用本項設定。 警告!請在進行前,先將您電腦內重要的檔案進行備份。 注意:這項操作可能需要一段時間才能完成。 1. 2. 4. 開啟常用工具列(Charms bar)。 選擇 Setting(設定)> Change PC Setting(變更電腦設定)> Gengral (一般)。 捲動至下方 Remove everything and reinstall Windows(移除所有內容 並重新安裝 Windows)選項上,點選 Get Started(開始)。 依照畫面中的提示完成重新安裝與重置的操作。 50 AII-in-One 電腦 ET232 系列 3.
附錄 注意事項 REACH Information 注意:謹遵守 REACH(Registration, Evaluation, Authorisation, and Restriction of Chemicals) 管理規範,我們會將產品中的化學物質公告在華碩 REACH 網 站,詳細請參考 http://csr.asus.com/english/REACH.htm。 產品回收與處理 舊電腦、筆記型電腦與其他電子設備,其包含有危險性的化學物質,若當成 一般垃圾掩埋時,則有害於環境。經由資源回收的方式,在舊電腦內使用的 金屬、塑膠與零組件,都可以打碎並且重新再利用做成新的產品。而且,環 境也能被保護,而不被任何不受控制所釋放有害的化學物質所危害。 華碩與資源回收業者以最高標準相互配合,以保護我們的環境,確保工作者 的安全,以及遵從全球有關環境保護的法律規定。我們保證以資源回收的方 式回收以往生產的舊設備,透過多樣的方式保護環境。 如欲了解更多關於華碩產品資源回收資訊與聯絡方式,請連線上網至 CSR(Corporate Social Responsibility)網頁:http://csr.asus.
加拿大通訊部聲明 此數位設備未超過加拿大通訊部無線電干擾管理規定中關於數位設備無線 電噪音輻射的 Class B 限值。 Class B 類數位設備符合加拿大 ICES-003 規範要求。 警語 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不 得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾 現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法通信,指依電信法規定作業之無線通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設 備之干擾。 重要! 5.25-5.35 GHz 頻帶內操作之無線資訊傳輸設備,限於室內使用。 Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules.
• • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the guarantee of this device could void the user’s authority to operate the equipment.
Declaration of Conformity (R&TTE directive 1999/5/EC) • • • • • • • • The following items were completed and are considered relevant and sufficient: Essential requirements as in [Article 3] Protection requirements for health and safety as in [Article 3.1a] Testing for electric safety according to [EN 60950] Protection requirements for electromagnetic compatibility in [Article 3.
不同區域的無線網路運作頻道 N. America(北美) Japan(日本) Europe ETSI(歐洲) 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.
Global Environmental Regulation Compliance and Declaration ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
AII-in-One 電腦 ET232 系列 57
Manufacturer Authorised representative in Europe 58 ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN ASUSTeK Computer GmbH Address: HARKORT STR.