華碩 電腦 使用手冊 ET232 系列 ET2321I ET2322I
T8388 1.00 版 2013 年 7 月發行 版權說明 ©ASUSTeK Computer Inc. All rights reserved.
目錄 目錄 關於本使用手冊................................................................................... 5 本手冊使用的慣例...................................................................... 6 圖示................................................................................................ 6 字型................................................................................................ 6 安全性須知............................................................................................ 7 建立系統..........................
Windows® 8 介面...............................................................................28 開始畫面.....................................................................................28 Windows® 應用程式..................................................................29 熱點..............................................................................................29 使用 Windows® 應用程式處理工作...............................................32 執行應用程式....................................................................
關於本使用手冊 本使用手冊提供您關於 All-in-One 電腦的硬體資訊與軟體功能,內容則是 由下面幾個章節所組成: 第一章:硬體設定 本章節介紹關於 All-in-One 電腦上各硬體元件的功能與說明。 第二章:使用您的 All-in-One 電腦 本章節提供您 All-in-One 電腦的各項使用資訊。 第三章:使用 Windows® 8 系統 本章節概觀介紹如何在 All-in-One 電腦上面使用 Windows® 8 作業系 統。 第四章:連線至網路 本章節介紹有關如何使用有線或無線的方式將 All-in-One 電腦連線至 網路。 第五章:還原您的系統 本章節提供如何還原的方式以供您將 All-in-One 電腦進行系統還原。 附錄 本附錄提供包含 All-in-One 電腦的注意事項與安全規範。 AII-in-One 電腦 ET232 系列
本手冊使用的慣例 為了強調手冊中的重要訊息,訊息說明會以下列方式呈現: 重要!本訊息包含必須遵守才能完成工作的重要訊息。 說明:本訊息包含助於完成工作的額外訊息與提示。 警告!本訊息包含在特定工作時必須遵守以維護用戶安全以及避免 造成華碩 All-in-One 電腦資料與組件毀損的重要資訊。 圖示 下列圖示分別表示可以用在華碩 All-in-One 電腦上完成所有工作的不同裝 置。 = 使用觸控螢幕 = 使用鍵盤 字型 粗體 = 代表必須選取的選單或項目。 斜體 = 代表必須按下的按鍵。 在本手冊中所有的產品圖與軟體圖片僅供參考,請依您實際的產品規格與軟 體畫面為主。請隨時造訪華碩網站:tw.asus.
安全性須知 華碩 All-in-One 電腦 ET232 系列為經過設計與測試以符合最新安全標準的 資訊技術設備。然而,為確保您的安全,在使用本產品前,請詳閱以下的 安全操作說明。 建立系統 • • • • 在您使用本系統前,請先閱讀並依照使用手冊上的說明操作。 請勿將本產品放置在容易受潮或有發熱源(如散熱器附近)的位置。 請將本產品放置在平穩的地方。 機殼上有開孔之處請保持通風,請不要阻擋或遮蓋這些開孔,以確保在本 系統周圍的空間距離能保持通風。也請不要拿任何物件塞入這些通風孔。 • 本產品的建議操作環境之溫度為介於 0℃ 至 40℃ 之間。 • 若您使用電源延長線,請確認安裝在延長線上所有裝置的總使用安培數 不會超過其額定功率。 使用注意事項 ‧ 請不要在電源線上走動,或將任何東西壓在電源線上。 ‧ 請不要讓水或任何液體濺到本產品。 ‧ 當系統關機後,仍有極小的電流流通,若要清理系統,請記得先將所 有電源、數據機與網路線從插座上拔除。 • 為了讓螢幕保持較佳的觸控感應能力,每隔一段時間需要進行清潔的 動作,隨時保持螢幕的清潔,以避免外來或過度的灰塵堆積。請依照 以下的方式清潔螢幕: • 關閉系
聲壓 警告:從耳機或頭戴式耳機上輸出過高的音量可能會導致聽力受損或喪 失。請注意盡量不要將音量控制與平衡器調整在中間值以上,如此可能會 導致耳機或頭戴式耳機的聲壓輸出增大,而造成聽力有所影響。 TV 選台器(選配) 注意:要安裝有線電視系統,在此提醒 CATV 系統安裝者的安裝程式須注 意第 820-93 國家電器規範,以提供適當的接地準則。尤其是指定屏蔽的同 軸電纜連接到接地系統的建物作為靠近點在實際的纜線入口。 變壓器 1. 變壓器資訊: 輸入電壓:100–240Vac 輸入頻率:50–60Hz 2.
包裝盒內容物 ET2321I ET2322I ET2321I ET2322I All-in-One 電腦 ET232 系列、底座與螺絲 有線 / 無線鍵盤(選配) 有線/無線滑鼠(選配) 電源線 電源變壓器 TV 接收器(選配) 保固卡 USB 介面 KBM 接收器(選配) ABC 1 Quick Guide 3 JKL MNO 5 6 TUV 7 8 * 0 CLEAR R DEF 2 GHI 4 PQRS WXYZ 9 # ENTER G Y B T 重低音喇叭(選配) 快速使用手冊 遙控器(選配) 說明:以上的鍵盤、滑鼠、遙控器、電源變壓器與 USB 介面 KBM 接收器等圖示僅供參考,實際的產品樣式會因您所在地區而可能會 有不同的搭配。 AII-in-One 電腦 ET232 系列
第一章:硬體設定 認識您的 All-in-One 電腦 前視圖 ET2321I ET2322I 10 AII-in-One 電腦 ET232 系列
1 麥克風(內建) 內建的麥克風可以讓您搭配攝影機鏡頭使用視訊連線傳輸聲音、或語 音解說、錄音與搭配多媒體應用程式時使用。 2 攝影機鏡頭 內建的攝影機鏡頭可以讓您搭配麥克風使用視訊連線。 3 攝影機鏡頭指示燈 當內建的攝影機鏡頭啟動時會亮燈顯示。 4 遙控器接收器 此為使用選配的遙控器進行遙控控制時的接收器。 5 觸控螢幕(選配) 這個 23 吋的觸控螢幕提供 16:9 寬螢幕 IPS 面板,並且支援 full HD 1920 x 1080 顯示解析度,而觸控功能並提供 10 點觸控,可讓您透過 指尖操作享受數位生活。 6 硬碟指示燈 當亮燈時表示硬碟正在動作。 7 電源指示燈 當亮燈時表示電源已開啟。 AII-in-One 電腦 ET232 系列 11
後視圖 1 天線連接埠(選配) 本天線連接埠為提供 TV(電視)頻率訊號接收,連接標準的室內或室 外天線,便可以接收數位電視訊號。 重要!這組連接埠僅在具備 TV 選台器的機種上才有提供。 2 電源輸入接頭 電源變壓器可以將 AC 電源轉換為 DC 電源,轉換的電源透過電源輸入 接頭提供電力給您的電腦,為了避免損害電腦,請使用電源變壓器。 警告!當電源正在使用中,電源變壓器的溫度可能會變熱,請勿將 電源變壓器覆蓋或放置靠近您的身體。 3 網路連接埠 這個 RJ-45 網路埠支援標準乙太網路線連接至區域網路。 12 AII-in-One 電腦 ET232 系列
4 HDMI 輸入埠 HDMI(高畫質多媒體介面)為一個非壓縮採全數位音效/影像介面,可 以與任何的影音裝置來源連接,如:數位機上盒、DVD 播放機。 5 HDMI 輸出埠 可以透過 HDMI 訊號線連接此埠,並將另一端連接至具有 HDMI 輸入 埠的裝置,如 LCD 螢幕或投影機做輸出。 6 USB 3.0 連接埠 這些通用序列匯流排(USB 埠)的傳輸率可高達 5Gbit/s 且向下相容 USB 2.0。 這組連接埠也可以搭配 AI Charger II 功能,提供您快速將相容的裝置 充電。若您想在 All-in-One 電腦上啟用 AI Charger II 功能,請選擇桌 面 > AI Suite II > AI Charger II,然後選擇 Enable(啟用)。 7 USB 3.0 連接埠 這些通用序列匯流排(USB 埠)的傳輸率可高達 5Gbit/s 且向下相容 USB 2.0。 8 USB 2.0 連接埠 此通用序列匯流排(USB 埠)提供具備 USB 2.0或 1.
底視圖(未安裝底座) 1 USB 2.0 連接埠 此通用序列匯流排(USB 埠)提供具備 USB 2.0或 1.
6 選單向下鍵 當調整選單設定時,按下此鍵可以向下移動選擇選單裡的項目。您也 可以使用這個按鍵來降低該項目裡的數值,如亮度、對比度、音量等 等。 7 MENU(選單)鍵 按下此鍵可顯示選單。當顯示 OSD 選單時,輕觸此鍵可以進入/選擇各 項功能。 8 選單向上鍵 當調整選單設定時,按下此鍵可以向上移動選擇選單裡的項目。您也 可以使用這個按鍵來增加該項目裡的數值,如亮度、對比度、音量等 等。 9 電源開關 提供您開啟或關閉系統。 10 喇叭 內建的立體聲喇叭系統可以讓您不需外接喇叭,即可聆聽音效。這個 音效設定功能為透過 All-in-One 電腦裡的軟體控制。 AII-in-One 電腦 ET232 系列 15
右視圖 11 光碟機手動退片插孔 當按下光碟機上的電動退片按鈕而托盤無任何退片動作時,可以透過 這個手動的退片插孔,使用迴紋針插入後將托盤從光碟機內退出。 警告!僅當按下光碟機上面的電動退片鈕無動作時,才使用此手動 退片插孔進行退片。 12 光碟機退片鈕 按一下可以讓光碟機的托盤退出。您也可以透過任何播放軟體退出托 盤,或使用滑鼠右鍵點選 Windows 作業系統的“電腦”裡的光碟機圖 示,並選擇下拉選單中的“退出”。 13 光碟機 內建的光碟機可支援標準 CD、數位影音 DVD 或藍光光碟,部份機型 可能具備寫(R)或覆寫(RW)的功能。關於這部份,請參考市場行 銷規格中,有關各機型所支援的光碟機類型說明。 16 AII-in-One 電腦 ET232 系列
第二章:使用您的 AII-in-One 電腦 安裝 AII-in-One 電腦的底座 1. 2. 請將 AII-in-One 電腦放置在平坦 的桌面上。 將底座上的安裝孔對準支架置 入。 螺絲 底座 支架 說明:底座上的安裝孔僅能 以一個方向裝入支架。 3. 從底座底部,使用十字螺絲起 子,鎖上隨附的螺絲,或者您 也可以使用銅板或代幣來將螺 絲鎖入底座。 說明:以上的安裝圖示僅供參考,實際使用的底座可能會因 AiO 機 種的不同而在搭配上也有所不同,但安裝步驟是相同的。 擺放您的 AII-in-One 電腦 1. 2.
啟動您的 AII-in-One 電腦 連接有線鍵盤與滑鼠 將鍵盤與滑鼠連接線連接至電腦後側面板上 的 USB 連接埠。 連接無線鍵盤與滑鼠 1. 2. 3.
連接電源變壓器與開機 將電源變壓器連接至後端面板上的 DC IN 插孔( 1 在前面板右側的電源開關( 4 )以進行開機。 2 3 ),然後按下位 2 3 1 警告!請勿在 AC 電源變壓器接至系統上的 DC 插孔之前,先將電源 線連接至 AC 插座,這麼做可能會導致 AC-DC 變壓器的損壞。 4 說明:若要了解如何將 All-in-One 電腦關機,請參考在使用 Windows® 8 系統章節中關閉 All-in-One 電腦的說明。 AII-in-One 電腦 ET232 系列 19
使用 OSD 選單 當您這樣做時,在螢幕上會顯示 OSD 選單: 1. 按下前面板上的 MENU(選單)鍵。 2. 將 HDMI 訊號線連接至後側面板的 HDMI 輸入連接埠。 OSD 功能說明 當按下前面板上的 MENU(選單)鍵時,會顯示 OSD 選單。若要選擇 OSD 功能項目或調整 OSD 設定,請按 Menu up 或 Menu down(選單上 / 下) 鍵。若要啟用選擇的功能,請按 MENU(選單)鍵。 說明:請參考前面認識您的 All-in-One 電腦的內容,以了解前面板 按鈕的相關位置。 Panel Off(關閉螢幕) 這個功能提供您切換顯示功能。 Color(色彩) • Brightness(亮度):調整範圍是從 0 至 100。 • Contrast(對比):調整範圍是從 0 至 100。 • Color Temp.
System Setup(系統設定) • OSD 設定: 1. 水平位置(H-Position)- 調整 OSD 選單的水平位置。 2. 垂直位置(V-Position)- 調整 OSD 選單的垂直位置。 3. 調整 OSD 停止時間從 10 至 120 秒。 4.
觸控功能 您可以在 All-in-One 電腦的觸控螢幕上,使用觸控功能並通過手指移動以 執行應用程式或進行設定。 使用觸控功能 向左滑動 向右滑動 一隻手指於觸控板上向左滑動以 開啟 Charms bar。 一隻手指於觸控板上向右滑動以 開啟執行中的應用程式。 向下滑動 滑動 ‧一 隻手指於開始畫面向下滑 動,可以查看所有應用程式。 ‧ 在 應 用 程 式 一 隻 手 指 向 下 滑 動,可以查看選單。 手指上下滑動可上下滾動畫面, 或是可以左右移動畫面。 22 AII-in-One 電腦 ET232 系列
縮小 放大 將兩隻手指拉近來縮小畫面。 將兩隻手指拉遠來放大畫面。 點選並長按 點選/雙按 ‧請 點選並長按應用程式名稱, 然後拖曳至新的位置。 ‧ 點 選並長按執行中應用程式 的頂端後,向下拖曳可以關 閉執行中的應用程式。 ‧ 點選以執行應用程式。 ‧ 於桌面模式時,點選兩下以執 行項目。 AII-in-One 電腦 ET232 系列 23
透過連接 HDMI 裝置(選配)設定音效輸出 若您想要使用高畫質電視做為音效輸出裝置,請將其與家用劇院級 PC 連 接,並依照以下的步驟設定音效。 透過 HDMI 裝置設定音效輸出 1. 從開始畫面中,點選 Desktop(桌面)並開啟 Desktop Mode(桌面模 式)。 說明:請參考在使用 Windows® 8 系統章節中有關開始畫面的說 明。 2. 再從 Windows® 作業系統工具列上,用滑 鼠右鍵點選 Volume Mixer(喇叭)圖示後 選擇 Playback device(播放裝置)。 3. 4.
5. 點選 Stereo(立體聲)後,並點 選 Next(下一步)繼續。 6. 勾選 Front left and right 選項後, 點選 Next(下一步)繼續。 然後點選 Finish(完成)以離開 設定畫面。 7.
AII-in-One 電腦 ET232 系列
第三章:使用 Windows® 8 系統 首次使用時(Windows® 8 與 Windows® 8 Professional 版) 當您第一次啟動電腦時,Windows® 8 作業系統會顯示一系列的畫面,引導 您依照步驟進行個人化基本設定。 請依照以下步驟進行初始化設定: 1. 2. 3. 按下 All-in-One 電腦上的電源按鈕,稍候幾分鐘,直到顯示設定畫面。 選擇 All-in-One 電腦顯示的語言。 仔細閱讀使用者授權同意書後,勾選 I accept the terms for using Windows, 然後點選 Accept(同意)。 4. 依照畫面上的提示設定以下的基本項目: ‧ Personalize(個人化) ‧ Wireless(無線連線) ‧ Settings(設定) ‧ Sign in to your PC(登錄您的電腦) 5. 當您完成基本項目設定時,Windows® 8 說明畫面即會顯示,可以讓您 從中瞭解更多關於 Windows® 8 的功能。 6.
Windows® 8 介面 Windows® 介面為採用 Windows® 8 新風格開始畫面,您可以從開始畫面中 組織與輕鬆造訪 Windows® 應用程式。 開始畫面 開始畫面會在成功登入您的使用者帳戶後出現,它能將您所需的所有軟體 與程式集中於一處組織管理。 Windows® 應用程式 使用者帳戶 放大/縮小按鈕 28 AII-in-One 電腦 ET232 系列
Windows® 應用程式 在開始畫面中可以看到許多固定在畫面中的應用程式,這些應用程式以“動 態磚”的方式顯示,方便您輕鬆造訪。 重要!要執行 Windows® 應用程式需要 1024 x 768 畫素或解析度 更高的螢幕。 說明:某些應用程式在完全執行之前需要先登入您的 Microsoft 帳 戶。 熱點 畫面上的熱點提供您執行程式並存取電腦設定。這些功能可以使用滑鼠啟 動。 程式執行中的熱點 AII-in-One 電腦 ET232 系列 29
開始畫面的熱點 說明:有關熱點的說明,請參考下一頁。 30 AII-in-One 電腦 ET232 系列
熱點 動作 左上角 移動您的滑鼠游標然後點按最近使用的應用程式縮圖以 返回該應用程式。 如果您執行一個以上的應用程式,向下滑動以顯示所有 執行中的應用程式。 左下角 從一個執行中的應用程式畫面: 移動您的滑鼠游標然後點按開始畫面的縮圖以返回開始 畫面。 說明:您也可以按下在鍵盤上的 Windows 按鍵 ,便能返回至開始畫面。 從開始畫面: 移動您的滑鼠游標然後點按執行中的應用程式縮圖以返 回該應用程式。 移動您的滑鼠游標然後點按最近使用的應用程式縮圖以 返回該應用程式。 頂端 移動您的滑鼠點按直到變成一個手掌圖示,可以拖曳該 應用程式至新的位置。 說明:這項功能僅在當執行應用程式或當您想使 用子母畫面(Snap)功能時才會運作。如要瞭解 更多細節,請參考使用 Windows 應用程式處理 工作中的子母畫面(Snap)功能。 右上與右下角 移動您的滑鼠游標以執行 Charms bar(常用工具列)。 AII-in-One 電腦 ET232 系列 31
使用 Windows® 應用程式處理工作 使用 All-in-One 電腦的觸控板或鍵盤以執行並個人化您的應用程式。 執行應用程式 用手指點選應用程式後開啟。 1. 按下 鍵兩次然後使用方向鍵透過應用程式瀏覽。 2.
關閉應用程式 1. 點 按頂端正在執行的應用程式,然後拖曳並放至畫面底部以關閉 程式。 2.
釘選更多應用程式至開始畫面 您可以使用觸控板在開始畫面中釘選更多的應用程式。 1. 於應用程式名稱向下滑動以開啟其設定列。 2.
常用工具列(Charms bar)功能說明 搜尋 可讓您尋找華碩 All-in-One 電腦中的檔案或應用程式。 分享 可讓您透過社群網站或電子郵件分享程式。 開始 可返回至開始畫面。從開始畫面中您也可以使用此功能以返 回最近開啟的應用程式。 裝置 可讓您與連接至華碩 All-in-One 電腦的裝置存取與分享檔 案,像是外接螢幕或是印表機。 設定 可讓您進行華碩 All-in-One 電腦的設定。 AII-in-One 電腦 ET232 系列 35
子母畫面功能 使用子母畫面(Snap)功能可讓您在華碩 All-in-One 電腦上同時執行兩個 應用程式。此功能一旦啟動之後,便會將您的螢幕分割為兩個畫面。 重要!要使用子母畫面功能需要解析度至少 1366 x 768 像素的螢 幕。 子母畫面功能分割線 啟動子母畫面功能 使用華碩 All-in-One 電腦的觸控螢幕或鍵盤以啟動子母畫面功能。 1. 點按並執行應用程式。 2. 移動滑鼠游標至螢幕畫面頂端。 3. 一旦光標變為手掌圖示,將應用程式拖曳並放至螢幕畫面的右側 或左側。 4. 開啟其他應用程式。 1. 執行您想要進行子母畫面的應用程式。 2. 按下 3.
功能組合鍵 若是搭配鍵盤,您也可以使用以下的組合鍵來快速開啟應用程式與瀏覽 Windows® 8。 可以用在開始畫面與正在執行的應用程式之間切換。 開啟桌面 開啟〝桌面模式”下的“電腦”視窗。 開啟“檔案”搜尋視窗。 開啟“共享”視窗。 開啟“設定”視窗。 開啟“裝置”視窗。 啟動鎖定螢幕。 Internet Explorer(IE 瀏覽器)視窗最小化。 開啟“第二個螢幕”視窗。 開啟“搜尋應用程式”視窗。 開啟“執行”視窗。 AII-in-One 電腦 ET232 系列 37
開啟“簡易存取中心”。 開啟“搜尋設定”視窗。 開啟 Windows 工具選單。 啟動放大鏡圖示以放大畫面。 縮小畫面。 開啟“朗讀程式”設定。 開啟“螢幕截圖”功能。 關閉華碩 All-in-One 電腦 請選擇以下的任一個方式,即可將華碩 All-in-One 電腦關機。 ‧ 從 常用工具列(Charms bar)點選 後再點選 down(關機)就可以執行一般正常關機。 ‧ 從登入(log-in)畫面中,點選 > Shut > Shut Down(關機)。 ‧ 若 您的華碩 All-in-One 電腦未有回應,請按住電源按鈕至少 4 秒鐘直到華碩 All-in-One 電腦關機。 38 AII-in-One 電腦 ET232 系列
第四章:連線至網路 您可以設定無線 Wi-Fi 或有線連線方式,讓電腦可以存取電子郵件,上網 瀏覽網頁,或是透過社群網站共享應用程式。 在 Windows® 8 設定 Wi-Fi 連線 1. 從開始畫面或從任一應用程式模式下開啟常用工具列(Charms bar)。 說明:請參考 使用 Windows® 應用程式處理工作 內容中關於常用工 具列(Charms bar)的說明。 常用工具列(Charms bar) 2.
3. 4.
在 Windows® 8 設定有線網路連線 請依照以下方式設定有線網路的連線: 1. 2. 3. 使用一條(RJ-45)網路線,將一端連接至 All-in-One 電腦的網路埠, 然後另一端則連接至 DSL/纜線數據機或一個區域網路。 將電腦開機。 依照螢幕上的提示,進行必要的網路連線設定。 說明: ‧ 如要了解更多細節,請參考接下來 設定動態的 IP/PPPoE網路連 線 或 設定固定 IP 網路連線 的說明。 ‧ 請聯絡您的網際網路服務供應商(ISP)以取得提供連線用的帳 號與密碼,才能設定您的網際網路連線。 設定動態 IP/PPPoE 網路連線 請依照以下方式設定動態 IP/PPPoE 網路連線: 1.
2. 3. 4. 5. 6.
7. 回到網路和共用中心後,點選設 定新的連線或網路。 8. 點選連線到網際網路後,再點選 下一步。 9. 點選寬頻(PPPoE)(R)後,再點 選下一步。 10. 輸入網際網路服務供應商(ISP) 提供連線用的使用者名稱、密碼 與連線名稱後,點選連線進入連 線畫面。 11. 當完成設定後,點選關閉離開。 12. 接著從點選工具列上的區域網路 圖示,然後選擇您剛剛所建立的 連線。 13.
設定固定 IP 網路連線 請依照以下方式設定固定 IP 網路連線: 1. 2. 3. 4. 5. 請先依前面動態 IP/PPPoE 網路連線 的設定步驟 1~4 操作。 選擇 Use the following IP address( 使用下列的 IP 位址)。 然後,再輸入網際網路服務供應商( ISP)提供連線用的 IP 位址、子網路 遮罩與預設閘道。 若是有需要,再輸入慣用 DNS 伺服 器位址與其他 DNS 伺服器位址。 當您完成輸入後,點選確定完成建 立。 設定藍牙連線 AII-in-One 電腦具備藍牙技術,無需纜線即能連接藍牙功能的裝置。具有藍 牙功能的裝置,可能為筆記型電腦、桌上型電腦、行動電話與 PDA 等。 說明:若您的 AII-in-One 電腦無內建藍牙,則需要連接 USB 藍牙模 組才能使用藍牙功能。 在 Windows® 8 系統下新增藍牙裝置: 1.
2. 再點選 Add a Bluetooth device( 新增藍牙裝置),以搜尋可用 的藍牙裝置。 3. 從電腦設定視窗中,點選 Add a device(新增裝置)以尋找想要 連線配對的藍牙裝置。 4. 從清單中選擇藍牙裝置,並點 選 Next(下一步)繼續。 5.
AII-in-One 電腦 ET232 系列
第五章:還原您的系統 進入 BIOS 設定程式 BIOS(Basic Input and Output System)為儲存系統的硬體設定,提供電腦啟 動時所需要的設定。 在正常的情況下,預設的 BIOS 設定通常適用於大多數使用情況下,以確保 最佳的效能。若您發生以下的情況,才需要進行變更 BIOS 設定: ‧ 在系統開機時顯示錯誤提示訊息,並且要求您執行 BIOS 設定程式。 ‧ 您已經安裝一個新的系統組件,而需要進一步做 BIOS 設定程式或更 新。 警告!不正確的 BIOS 設定可能會導致不穩定或開機失敗。如有此需 求時,強烈建議尋求專業的產品技術人員來進行變更 BIOS 設定。 快速進入 BIOS Windows® 8 系統的開機時間相當快速,因此我們提供以下這些方式讓您快 速進入 BIOS 設定程式畫面: ‧ 當 All-in-One 電腦關機時,按住電源按鈕至少 4 秒鐘以上,就可以直 接進入 BIOS。 ‧ 按住電源按鈕至少 4 秒鐘可以將 All-in-One 電腦關機,然後再次按電 源按鈕將 All-in-One 電腦啟動,並於 POST(開機自我檢測)過程中按 下 鍵
在 Windows® 8 重新設定您的 All-in-One 電腦 使用 Reset your PC 選項可以將您的電腦還原至出廠預設值。 重要!請在進行還原前,先將您電腦內重要的檔案進行備份。 請依照以下方式重新設定您的 All-in-One 電腦: 1. 7. 8.
在 Windows® 8 使用系統映像檔還原 您可以建立一個 USB 還原碟,然後使用它來將 All-in-One 電腦進行還原。 建立一個 USB 還原碟 警告!當您要進行建立 USB 還原碟時,所有儲存在您所選擇的 USB 儲存裝置內的資料也會同時被刪除,請先確認您已經將重要資料進 行備份後再執行。 請依照以下方式建立 USB 還原碟: 1. 從 All Apps(所有程式)畫面中開啟 Control Panel(控制台)。 說明:如欲了解更多細節,請參閱使用 Windows® 應用程式處理工 作裡的執行應用程式的說明。 2. 3. 4. 接著從 Control Panel's System and Security(控制面板的系統與安 全)項目中,點選 Find and fix problems(尋找與解決問題)。 選擇 Recovery(還原) > Create a recovery drive(建立還原驅動磁 碟)。 點選 Next(下一步)繼續。 說明:若勾選框未勾選,則在 回復裝置裡不會安裝驅動與應 用程式。 5. 6.
7. 8. 點選 Create(建立),稍候一段時 間等待完成。 當完成後,點選 Finish(完成)離 開。 移除所有檔案與重新安裝 Windows® 8 將您的電腦還原至原始出廠的預設值狀態時,會移除所有的檔案內容,並 且重新 安裝選項在電腦設定裡,請參考以下的方式以使用本項設定。 警告!請在進行前,先將您電腦內重要的檔案進行備份。 注意:這項操作可能需要一段時間才能完成。 1. 2. 4. 開啟常用工具列(Charms bar)。 選擇 Setting(設定)> Change PC Setting(變更電腦設定)> Gengral( 一般)。 捲動至下方 Remove everything and reinstall Windows(移除所有內容 並重新安裝 Windows)選項上,點選 Get Started(開始)。 依照畫面中的提示完成重新安裝與重置的操作。 50 AII-in-One 電腦 ET232 系列 3.
附錄 不同區域的無線網路運行頻道 N. America(北美) Japan(日本) Europe ETSI(歐洲) 2.412-2.462 GHz 2.412-2.484 GHz 2.412-2.
WEEE 標誌:這個打叉的垃圾桶標誌表示本產品(電器/電子設備) 不應視為一般垃圾丟棄,請依照您所在地區有關廢棄電子產品的處 理方式處置。 請勿將內含汞的電池當作一般垃圾丟棄。這個打叉的垃圾桶標誌表 示電池不應視為一般垃圾丟棄。 請勿將電池當作一般垃圾丟棄。這個標誌表示電池不應視為一般垃 圾丟棄。 REACH Information 注意:謹遵守 REACH(Registration, Evaluation, Authorisation, and Restriction of Chemicals) 管理規範,我們會將產品中的化學物質公告在華碩 REACH 網 站,詳細請參考 http://csr.asus.com/english/REACH.
產品回收與處理 舊電腦、筆記型電腦與其他電子設備,其包含有危險性的化學物質,若當成 一般垃圾掩埋時,則有害於環境。經由資源回收的方式,在舊電腦內使用的 金屬、塑膠與零組件,都可以打碎並且重新再利用做成新的產品。而且,環 境也能被保護,而不被任何不受控制所釋放有害的化學物質所危害。 華碩與資源回收業者以最高標準相互配合,以保護我們的環境,確保工作者 的安全,以及遵從全球有關環境保護的法律規定。我們保證以資源回收的方 式回收以往生產的舊設備,透過多樣的方式保護環境。 如欲了解更多關於華碩產品資源回收資訊與聯絡方式,請上網至 GreenASUS Takeback and Recycling(產品回收與處理)網頁:http://csr.asus.com/english/ Takeback.
符合能源之星(Energy Star) 標示有 ENERGY STAR 標誌的 ASUS 產品,均符合美國環 保署所制訂的 ENERGY STAR 規範,而且產品電源管理功 能都已經啟用。有關電源管理功能及其潛在效益的詳細 資訊,可參考 http://www.energy.gov/powermanagement。 美國環保署所制訂的 ENERGY STAR 規範,旨在推廣能源 效益產品以減少空氣污染。藉由 ENERGY STAR,使用者 每年可節省高達 30% 的電力以及電費,同時減少溫室氣 體排放。電腦在靜置 15 分鐘與 30 分鐘後,會自動進入睡眠模式,使用者 可以藉由按任何鍵將電腦由睡眠模式中喚醒。 能源之星的相關資訊,可參考 http://www.energystar.
AII-in-One 電腦 ET232 系列 55
Manufacturer ASUSTek COMPUTER INC. Address, City 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN Country TAIWAN Authorized Representative in Europe ASUS COMPUTER GmbH Address, City HARKORT STR.