Manual

English
26 All-in-one PC ET24 Series
Mounting to the wall
To mount your All-in-one PC to the wall, purchase an optional wall mount adapter, and a wall
mount kit (pad and rack). Install the wall mount kit according to the following instructions.
The following instructions are for reference only. The actual installation procedures may vary
depending on your purchased wall mount kit.
1. Remove the four screws on the stand to
release the stand. Keep the screws for
future use in case you want to reinstall the
stand.
2. Align the wall mount adapter to the holes at the back of the All-in-one PC and install it.
Secure the adapter with four screws.