Italiano Manuale Utente Serie ET2410/ET2210
I6665 Prima Edizione V1 Maggio 2011 Italiano Copyright © 2011 ASUSTeK COMPUTER INC. Tutti i Diritti Riservati. Alcuna parte di questo manuale, compresi i prodotti e i software in esso descritti, può essere riprodotta,trasmessa, trascritta, archiviata in un sistema di recupero o tradotta in alcuna lingua, in alcuna forma e in alcun modo, fatta eccezione per la documentazione conservata dall’ acquirente a scopi di backup, senza l’espressa autorizzazione scritta di ASUSTeK COMPUTER INC. (“ASUS”).
Le condizioni di garanzia variano a seconda del tipo di prodotto e sono specificatamente indicate nel Certificato di Garanzia allegato, cui si fa espresso rinvio. Inoltre la presente garanzia non è valida in caso di danni o difetti dovuti ai seguenti fattori: (a) uso non idoneo, funzionamento o manutenzione improprio, incluso senza limitazioni l’ utilizzo del prodotto con una finalità diversa da quella conforme alle istruzioni di ASUSTeK COMPUTER INC.
Licenza Software I prodotti ASUS possono essere corredati da software, secondo la tipologia del prodotto. I software, abbinati ai prodotti, sono in versione “OEM”: il software OEM viene concesso in licenza all’utente finale, come parte integrante del prodotto; ciò significa che non può essere trasferito ad altri sistemi hardware e che, in caso di rottura, di furto o in ogni altra situazione che lo renda inutilizzabile, anche la possibilità di utilizzare il prodotto OEM viene compromessa.
Condizioni e Limiti di Copertura della Garanzia sul Prodotto.............................................. 3 Licenza Software................................................................................................................................... 4 Comunicazioni....................................................................................................................................... 7 Dichiarazione della Federal Communications Commission.........................................
Posizionamento di All-in-one PC............................................................ 25 Collocazione su Scrivania................................................................................................................25 Montaggio a Parete...........................................................................................................................26 Installazione di All-in-one PC.................................................................
Comunicazioni Dichiarazione della Federal Communications Commission Questo apparecchio rispetta i requisiti indicati nel regolamento FCC Parte 15. Il funzionamento è soggetto alle seguenti due condizioni: • • Questo apparecchio non causa interferenze dannose Questo apparecchio accetta qualsiasi interferenza ricevuta, comprese quelle che potrebbero causare un comportamento indesiderato.
Dichiarazione del Ministero delle Comunicazioni Canadese Questo apparecchio digitale non supera i limiti di classe B per emissioni radio, da parte di apparecchiature digitali, prescritti nel Regolamento sulle Interferenze Radio del Ministero delle Comunicazioni Canadese. Questo apparecchio digitale di classe B è conforme con la normativa canadese ICES-003.
Avviso Marchio CE Questo è un prodotto di Classe B e, in ambiente domestico, può causare interferenze radio. In questo caso, all’ utente potrebbe essere richiesto di adottare le misure adeguate. Marchio CE per dispositivi senza WLAN/Bluetooth Questa versione del dispositivo è conforme ai requisiti previsti dalla direttiva EEC 2004/108/EC “Electromagnetic compatibility”(Compatibilità elettromagnetica) e 2006/95/EC “Low voltage directive” (Direttiva per i Sistemi in Bassa Tensione).
Restrizione delle Bande di Frequenza Wireless (Francia) Alcune zone della Francia hanno bande di frequenza limitate.In questi casi la potenza massima all’interno è di: • • 10mW per l’intera banda dei 2.4 GHz (2400 MHz2483.5 MHz) 100mW per le frequenze tra 2446.5 MHz e 2483.5 MHz I canali compresi tra 10 e 13 operano nella banda dei 2446.6 MHz e 2483.5 MHz.
NON DISASSEMBLARE La garanzia non si applica a prodotti disassemblati dall’ utente Avvertenza Batteria Ioni-Litio ATTENZIONE: Pericolo di esplosione se la batteria non è sostituita in modo corretto. Sostituire solo con un tipo uguale o equivalente, consigliato dal produttore. Eliminare le batterie utilizzate come da istruzioni del fabbricante. Divieto di Esposizione a Liquidi NON esporre oppure utilizzare in prossimità di liquidi, pioggia o umidità.
Dichiarazione di Conformità con le Normative Internazionali in Materia di Tutela Ambientale Nella progettazione e realizzazione dei suoi prodotti, ASUS rispetta il concetto del “Green Design”, assicurandosi che tutte le fasi produttive siano in linea con le normative internazionali sull’ambiente, e mette a conoscenza del pubblico le informazioni sulla conformità con le disposizioni in vigore nei vari paesi del mondo. Consultare la pagina web http://csr.asus.com/english/Compliance.
Certificazione ENERGY STAR ENERGY STAR è un programma congiunto dell’agenzia americana per la protezione ambientale (U.S. Environmental Protection Agency) e del ministero statunitense per l’energia (U.S. Department of Energy) che mira a proteggere l’ambiente attraverso l’impiego di prodotti ecologici, più efficienti dal punto di vista energetico.
Norme di Sicurezza All-in-One PC - Serie ET2410/2210 è stato realizzato e testato per soddisfare i nuovissimi standard di sicurezza per apparecchiature IT. Tuttavia, per garantirne l’osservanza, è importante leggere le seguenti norme di sicurezza. Installazione del Sistema • • • • • • Prima di utilizzare l’apparecchio, leggere e seguire tutte le istruzioni contenute nella documentazione. Non utilizzare questo prodotto in prossimità di acqua o di sorgenti di calore, come un radiatore.
Pressione Sonora Avvertenza: un’eccessiva pressione del suono, proveniente da cuffie o auricolari,potrebbe causare danni all’udito. Si prega di notare che la regolazione del controllo volume e dell’equalizzatore, al di sopra della posizione centrale, potrebbe aumentare la tensione in uscita di cuffie e auricolari e, pertanto, il livello della pressione sonora.
Benvenuti Complimenti per aver acquistato All-in-one PC - Serie ET2410/2210.Le illustrazioni di seguito mostrano il contenuto della confezione del nuovo prodotto. Contattare il rivenditore, in caso di articoli danneggiati o mancanti.
Descrizione di All-in-one PC Vista Frontale Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema 1 2 3 Italiano 4 5 11 10 9 8 7 6 All-in-one PC - Serie ET2410/2210 17
Webcamera La webcamera integrata, insieme al microfono digitale, consente di effettuare video conversazioni online. 2 LED Webcamera Segnala l’attivazione della webcamera integrata. 1 3 4 Display LCD (Funzione touchscreen su modelli selezionati) Display LCD caratterizzato da una risoluzione ottimale. I modelli con funzione touchscreen portano la vita digitale sulla punta delle dita. 5 LED Disco rigido Indica l’attività del disco rigido.
Vista Posteriore Italiano Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema. 1 2 3 1 4 5 6 7 8 9 Porta per Lucchetto Kensington® La porta per lucchetto Kensington® consente di proteggere il computer con un lucchetto di sicurezza compatibile Kensington®. Questi lucchetti di sicurezza di solito sono provvisti di un cavo metallico ed impediscono al computer di essere rimosso da una postazione fissa.
2 Ingresso Alimentazione (DC 19V/ 19.5V) L’adattatore in dotazione converte la corrente elettrica alternata di rete in corrente continua da utilizzare con questo jack. L’energia elettrica fornita attraverso questo jack alimenta il PC. Per evitare danni al PC, utilizzare sempre l’adattatore in dotazione. Quando in funzione, l’adattatore può diventare piuttosto caldo. Per questo motivo, non deve essere coperto e va tenuto lontano dal corpo.
Viste Laterali Fare riferimento alla figura sottostante per identificare i componenti su questo lato del sistema. 1 2 Porta USB 3.0/ 2.0 (varia a seconda del modello) La porta USB (Universal Serial Bus) è compatibile con i dispositivi USB, come tastiere,mouse, foto/ videocamere e dischi rigidi. Porta Combo E-SATA + USB 2.0 Porta per la connessione con un disco rigido SerialATA esterno. 1 2 3 4 5 6 NON inserire un connettore diverso nella porta E-SATA.
6 Jack Subwoofer (su modelli selezionati) Il jack subwoofer proprietario è utilizzato per la connessione con un subwoofer per ASUS All-in-one PC e consente di riprodurre bassi vibranti (bassa frequenza) in applicazioni multimediali. Il jack per il subwoofer può essere collegato UNICAMENTE a subwoofer per All-in-one PC o a dispositivi audio prodotti da ASUS. NON deve essere in alcun modo collegato ad altre periferiche per evitare di danneggiare il dispositivo.
Uso del Display Touchscreen All-in-one PC porta la vita digitale sulla punta delle dita e funziona facilmente al tocco o con l’uso di uno stilo. Il tocco funziona come un mouse. • • Tocco breve = clic con il tasto sinistro di un mouse. Tocco lungo = clic con il tasto destro di un mouse. Italiano Il display Touchscreen è disponibile su modelli selezionati. Visualizzazione del Puntatore Touchscreen Il puntatore touchscreen, che rappresenta un mouse virtuale, facilita l’uso del display touchscreen.
2. Cliccare Change touch input settings. 3. Cliccare sulla scheda Touch in alto e 4. selezionare la casella accanto a Show the touch pointer when I’m interacting with items on the screen. Premere OK per terminare la configurazione. Al tocco dello schermo, sarà visualizzato un mouse virtuale. Italiano Pulizia del Display Touchscreen Il display Touchscreen richiede una pulizia periodica per poter mantenere sempre la massima sensibilità.
Posizionamento di All-in-one PC Collocazione su Scrivania Collocare All-in-one PC su una superficie piana orizzontale, come un tavolo o una scrivania, regolare il piedistallo������������������������������������������������������������������������� e inclinare lo schermo ad un angolo compreso fra 5 gradi in avanti e 20 gradi indietro, rispetto alla posizione verticale.
Montaggio a Parete Per installare All-in-one PC su una parete, acquistare un distanziale opzionale e un kit per il montaggio a parete (VESA 100 con distanziale e staffa di supporto) e attenersi alle istruzioni seguenti. 1 1. 2. Per smontare il piedistallo, porre All-in-one PC rivolto verso il basso, con la superficie dello schermo appoggiata su un piano di supporto liscio. Sollevare dal piano il piedistallo. Rimuovere la squadretta di fissaggio premendo e sollevando le clip.
Montare la piastra di fissaggio sul distanziale, utilizzando le quattro viti (M3 x 8L), fornite con il kit, sempre facendo attenzione alla corretta orientazione. 5. Attenendosi alle istruzioni del manuale di installazione, fornito con il kit (VESA100), fissare alla parete la staffa di supporto per il montaggio, mediante le quattro viti (M4 x 10L) in dotazione con lo stesso kit.
Installazione di All-in-one PC Connessione di Tastiera e Mouse via Cavo Collegare la tastiera 1 e il mouse 2 alla porta USB sul pannello posteriore. Se il cavo della tastiera non è lungo a sufficienza, è anche possibile collegare tastiera e mouse alla porta� USB sul lato sinistro del pannello.� 1 2 Italiano Connessione di Tastiera e Mouse senza Cavo 1. 2. 3. 4. Installare le batterie nel mouse e nella tastiera senza cavo. Inserire il dongle wireless per tastiera e mouse in una porta USB.
Accensione del Sistema Collegare l’adattatore AC in dotazione al jack DC IN sul pannello posteriore ( 1 2 premere il Pulsante di accensione sul lato destro ( 4 ) per accendere il sistema. 3 ) e poi 2 1 Italiano 3 AVVERTENZA! NON collegare il cavo di alimentazione AC ad una presa AC, prima di aver collegato la spina DC al sistema, altrimenti, l’adattatore AC-DC potrebbe essere danneggiato.
Configurazione di una Connessione Wireless 1. In area di notifica di Windows®,cliccare sull'icona di rete wireless con una stella arancione . 2. Selezionare dall’elenco la rete senza fili a cui connettersi e poi cliccare Connect. Nell'impossibilità di trovare il punto di accesso desiderato, cliccare sull'icona Refresh nell'angolo superiore destro per aggiornare e cercare di nuovo nell'elenco. Durante la connessione con una rete protetta, inserire la chiave o codice di protezione della rete.
Configurazione di una Connessione via Cavo Tramite IP statico 1. Cliccare sull'icona con il triangolo giallo in area di notifica di Windows® e selezionare Open Network and Sharing Center. Assicurarsi di aver collegato il cavo LAN a EeeTop PC. Sul pannello di sinistra, cliccare Change adapter settings 3. Con il tasto di destra del mouse, cliccare Local Area Connection e poi selezionare Properties. Italiano 2.
Italiano 4. Selezionare Internet Protocol Version 4(TCP/IPv4) e premere Properties. 5. Selezionare Use the following IP address. Inserire IP address, Subnet mask e Default gateway. Se necessario, immettere l’indirizzo del Preferred DNS server. Dopo aver inserito i valori corrispondenti, premere OK per terminare la configurazione. 6. 7. 8.
Tramite IP dinamico (PPPoE) 1. 2 Ripetere i passaggi 1–4 del paragrafo precedente. Selezionare Obtain an IP address automatically e premere OK. 3. Ritornare a Network and Sharing Center e poi selezionare Set up a new connection or network. 4. Scegliere Connect to the Internet e premere Next.
Selezionare Broadband (PPPoE) e premere Next. 6. Inserire Nome utente,Password e nome della connessione. Premere Connect. 7. Premere Close per terminare la configurazione. Italiano 5.
Cliccare sull'icona di rete in area di notifica e poi sulla connessione appena creata. 9. Utilizzare nome utente e password. Premere Connect per stabilire la connessione a Internet. Italiano 8.
Connessione con periferiche audio esterne Oltre agli altoparlanti stereo integrati (altoparlante destro-sinistro a 2-canali), All-in-one PC consente di utilizzare periferiche audio esterne. Consultare la tabella sottostante per la descrzione dei jack audio jacks sul pannello sinistro e le rispettive funzioni. Jack Audio Descrizione Uscita Audio; Collega con le cuffie.
Selezionare il dispositivo di riproduzione e premere Properties per configurare le impostazioni. 3. Impostare la configurazione avanzata, come la regolazione del livello degli altoparlanti e la potenza in uscita. Al termine della configurazione,premere OK. Italiano 2.
Ripristino del Sistema Mediante Partizione di Ripristino La partizione di ripristino comprende un’immagine del sistema operativo, i driver e le utilità installate nel sistema dal fabbricante e offre una soluzione completa per riportare rapidamente il software del sistema allo stato operativo originario, a condizione che il disco rigido sia in buone condizioni. Prima di servirsi della partizione di ripristino, copiare i file dati (p.e.
5. A seconda della situazione di cui al passaggio precedente, saranno cancellati i dati contenuti nel dispositivo di archiviazione USB o nella partizione selezionata. Premere Backup per avviare il processo di backup. Tutti i dati contenuti nel dispositivo di archiviazione USB o nella partizione selezionata andranno persi. Prima dell'operazione, assicurarsi di aver eseguito una copia di riserva dei documenti importanti. 6.
Italiano Produttore ASUSTek COMPUTER INC. Indirizzo, Città No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C Paese TAIWAN Rappresentante autorizzato in Europa ASUS COMPUTER GmbH 40 Indirizzo, Città HARKORT STR.