Benutzerhandbuch ET2411/ET2210 Serie
G7102 Erste Ausgabe V1 Januar 2012 Copyright © 2012 ASUSTeK COMPUTER INC. Alle Rechte vorbehalten. Kein Teil dieses Handbuchs darf ohne vorherige schriftliche Genehmigung der ASUS Telecom (“ASUS”) reproduziert, abgeschrieben, in einem abrufbaren System gespeichert, in irgendeine Sprache übersetzt oder mit irgendwelchen Mitteln oder in irgendeiner Form elektronisch, mechanisch, optisch, chemisch, durch Fotokopieren, manuell oder anderweitig übertragen werden.
Inhalt Hinweise.................................................................................................................................................. 5 CE-Kennzeichen-Warnung....................................................................................................... 7 Wireless-Betriebskanäle in verschiedenen Regionen..................................................... 7 Erklärung zur Erfüllung der weltweiten Umweltschutzbestimmungen................10 Rücknahmeservices................
Ausschalten..........................................................................................................................................27 Konfigurieren der Wireless-Verbindung.....................................................................................28 Konfigurieren der Kabelnetzwerkverbindung.........................................................................29 Verwenden einer statischen IP.........................................................................................
Hinweise Erklärung der Federal Communications Commission Dieses Gerät entspricht Teil 15 der FCC-Vorschriften. Im Betrieb müssen die folgenden beiden Bedingungen erfüllt werden: • Dieses Gerät darf keine schädliche Störstrahlung abgeben und • Dieses Gerät muss für empfangene Störstrahlung unempfindlich sein, auch für Störstrahlung, die unerwünschte Funktionen hervorrufen kann. Dieses Gerät wurde geprüft und entspricht den Grenzwerten für digitale Geräte der Klasse B gemäß Teil 15 der FCC-Vorschriften.
Canadian Department of Communications-Erklärung Diese digitale Ausrüstung überschreitet nicht die Klasse B-Grenzwerte für Funkemissionen für digitale Geräte, die von der kanadischen Behörde für Kommunikation in den Regelungen für Funkinterferenzen festgelegt wurden. Dieses digitale Klasse B-Gerät erfüllt die kanadischen Bestimmungen ICES-003. IC-Strahlenbelastungserklärung für Kanada Dieses Gerät erfüllt die IC-Strahlenbelastungsgrenzen für unkontrollierte Umgebungen.
CE-Kennzeichen-Warnung Es handelt sich hier um ein Produkt der Klasse B, das im Hausgebrauch Radiointerferenzen hervorrufen kann. In diesem Fall sollte der Benutzer geeignete Maßnahmen ergreifen. CE-Zeichen für Geräte ohne Wireless LAN/Bluetooth Die ausgelieferte Version dieses Gerätes erfüllt die Anforderungen der EEC directives 2004/108/ EC “Electromagnetic compatibility” und 2006/95/EC “Low voltage directive”.
Verbotene Wireless-Frequenzbänder in Frankreich In einigen Gebiete in Frankreich sind bestimmte Frequenzbänder verboten. Die im höchsten Fall erlaubten Leistungen bei Innenbetrieb sind: • • 10mW für das gesamte 2,4 GHz-Band (2400 MHz–2483,5 MHz) 100mW für Frequenzen zwischen 2446,5 MHz and 2483,5 MHz Die Kanäle 10 bis 13 arbeiten ausschließlich im Band von 2446,6 MHz bis 2483,5 MHz.
NICHT AUSEINANDERNEHMEN Die Garantie erlischt, wenn das Produkt vom Benutzer auseinander genommen wurde. Lithium-Ionen-Batterie-Warnung ACHTUNG: Es besteht bei nicht richtig ausgetauschter Batterie Explosionsgefahr. Tauschen Sie die Batterie nur gegen einen vom Hersteller empfohlenen und gleichwertigen Typ aus. Entsorgen Sie gebrauchte Batterien entsprechend den Angaben des Herstellers.
Erklärung zur Erfüllung der weltweiten Umweltschutzbestimmungen ASUS folgt dem Green-Design-Konzept, um unsere Produkte zu entwickeln und zu produzieren und versichert, dass jede Stufe des ASUS-Produktkreislaufs die weltweiten Umweltschutzbestimmungen erfüllt. Zusätzlich veröffentlicht ASUS die relevanten und auf den Bestimmungsanforderungen basierenden Informationen. Besuchen Sie bitte die Webseite http://csr.asus.com/english/Compliance.
ENERGY STAR konformes Produkt ENERGY STAR ist ein gemeinsames Programm der US-Umweltschutzbehörde und der US-Energiebehörde, welches helfen soll, Geld zu sparen und die Umwelt durch Energie-effiziente Produkte und Technologien zu schützen. Alle ASUS-Produkte mit dem ENERGY STAR-Logo erfüllen den ENERGY STARStandard und die Energieverwaltungsfunktion ist standardmäßig aktiviert. Der Monitor und der Computer wird nach einer inaktiven Zeit von 15 und 30 Minuten automatisch in den Schlafmodus versetzt.
Sicherheitsinformationen Ihr All-in-one PC ET2411/ET2210 wurde entwickelt und gestestet, um die neusten Sicherheitsstandards für IT-Ausrüstung zu erfüllen. Um Ihre Sicherheit zu gewährleisten, müssen Sie die folgenden Sicherheitsanweisungen sorgfältig lesen. Einrichten Ihres Systems • • • • • • Lesen und folgen Sie den Anweisungen im Handbuch, bevor Sie Ihr System in Betrieb nehmen. Benutzen Sie das Produkt nicht in der Nähe von Wasser oder Heizquellen (z.B. Heizkörper).
Schalldruck Warnung: Übermäßiger Schalldruck von Kopfhörern kann zu Gehörschäden oder -verlußt führen. Beachten Sie bitte, dass die Erhöhung der Lautstärke und des Equalizers über die Mittlelposition hinaus die Ausgangsspannung für die Kopfhörer erhöht und somit auch den Schalldruck.
Willkommen Wir gratulieren Ihnen zum Kauf des All-in-one PCs ET2411/ET2210. Die folgenden Abbildungen zeigen den Verpackungsinhalt Ihres neuen All-in-one PCs. Wenn ein Teil fehlt oder beschädigt ist, kontaktieren Sie bitte Ihren Händler.
Kennenlernen Ihres All-in-one PCs Frontseite Beziehen Sie sich auf die folgende Abbildung, um die Komponenten der Frontseite zu identifizieren.
Webcam Die eingebaute Webcam und das Mikrofon ermöglichen Ihnen Online-Video-Chats. 2 Webcam-LED Zeigt an, wenn die eingebaute Webcam aktiviert ist. 1 Digitales Mikrofon (integriert) Das eingebaute Mikrofon kann bei Videokonferenzen, Sprachberichten, Audioaufnahmen und Multimedia-Anwendungen eingesetzt werden.
Rückseite Beziehen Sie sich auf die folgende Abbildung, um die Komponenten der Rückseite zu identifizieren. 1 2 3 1 4 5 6 7 8 9 Kensington® Schloss-Öffnung Mit dem Kensington® Schlossanschluss kann Ihr Computer mit einem Kensington®kompatiblen Sicherheitsprodukt gesichert werden. Diese Sicherheitsprodukte verwenden üblicherweise ein Metallkabel mit einem Schloss, mit dem der Computer an einem festen Objekt angeschlossen und vor Diebstahl geschützt werden kann.
Stromeingang (Gleichstrom 19V) 2 Das mitgelieferte Netzteil wandelt Wechselstrom in Gleichstrom, welcher für die Stromversorgung des Gerätes benötigt wird, um. Der PC wird über diese Buchse mit Strom versorgt. Um eine Beschädigung des PCs zu vermeiden, verwenden Sie ausschließlich das mitgelieferte Netzteil Das Netzteil kann sich während des Betriebes erwärmen. Decken Sie es nicht ab und halten Sie es von Ihrem Körper fern.
Seitenansicht Beziehen Sie sich auf die folgende Abbildung, um die Komponenten der rechten Seite zu identifizieren. 1 ����������������� USB 3.0-Anschluss Der USB (Universal Serial Bus) -Port ist kompatibel mit USB-Geräten, z.B. Tastaturen, Zeigegeräte, Kameras und Festplattenlaufwerke�. 2 1 E-SATA + USB 2.0-Kombibuchse Hier können Sie ein externes Serial-ATA- Festplattenlaufwerk anschließen. 2 3 4 5 6 Stecken Sie keinen anderen Stecker in diesen SATAAnschluss.
6 Subwoofer-Anschluss Diese spezielle Buchse ist für den Anschluss der im Lieferumfang enthaltenen Subwoofers vorgesehen. Der Subwoofer liefert tiefe Bässe (niedrige Frequenzen) bei allen Ihren Multimedia-Anwendungen. Die Subwoofer-Buchse darf nur zusammen mit All-in-one PC-Subwoofern oder Wiedergabegeräten von ASUS verwendet werden. Schließen Sie KEINE anderen geräte an dieser Buchse an, um die Beschädigung Ihres All-in-one PCs und des anderen Gerätes zu vermeiden.
Verwenden des Touchscreens Der All-in-one PC legt Ihr digitales Leben direkt in Ihre Fingerspitzen Mit nur wenigen Berührungen lassen Sie den All-in-one PC für sich arbeiten. Ihre Berührungen funktionieren wie die Bedienung mit einer Maus: • • Antippen = Linksklick an der Maus Antippen und halten = Rechtsklick an der Maus Der berührungsempfindliche Bildschirm ist nur an bestimmten Modellen verfügbar.
2. Klicken Sie auf Change touch input settings. 3. Klicken Sie auf den Tab Touch und 4. markieren Sie das Kästchen vor Show the touch pointer when I’m interacting with items on the screen. Klicken Sie auf OK, um die Konfiguration zu beenden. Sie werden beim Berühren des Touchscrens eine virtuelle Maus sehen. Reinigung des Touchscreens • 22 Der Touchscreen erfordert eine regelmäßige Reinigung, um beste Berührungsempfindlichkeit zu gewährleisten.
Aufstellen Ihres All-in-one PC Aufstellen auf dem Schreibtisch Vergewissern Sie sich, dass Ihr All-in-one PC auf einer stabilen Oberfläche auf Ihrem Schreibtisch aufgestellt ist. Ziehen Sie den Standfuß nach außen, bis er in der richtigen Position einrastet. Drücken Sie den Bildschirm in einen Winkel von etwa 5 bis 20º nach hinten. Vermeiden Sie Winkel außerhalb der angegebenen Werte, um ein umkippen des Bildschirms zu vermeiden.
Befestigen an einer Wand Um Ihren All-in-one PC an der Wand aufzuhängen, müssen Sie zusätzlich den Wandmontagebausatz (VESA 100 mit Befestigungsplatte und Klemme) kaufen. Installieren Sie die Wandmontageplatte entsprechend den folgenden Anweisungen. 1 1. 2. 3. 24 Legen Sie Ihren All-in-one PC auf eine flache Oberfläche, z.B. einen Tisch und ziehen Sie den Ständer nach oben. Entfernen Sie die Rückplatte durch drücken und anheben der Clips. Drücken Sie den Ständer nach unten.
4. Installieren Sie den Wandmontagebausatz mit den mitgelieferten vier Schrauben in richtiger Ausrichtung an der Wandmontageplatte. 5. Hängen Sie den All-in-one PC in die Wandhalterung. Schrauben Sie die Wandhalterung an der Wand fest. Folgen Sie dazu den Anweisungen, die in der Anleitung für die Wandbefestigung beschrieben sind Die Abbildungen sind nur zu Ihrer Referenz. 1. Aus belüftungstechnischen Gründen muss um das Gerät herum ein Abstand von mindestens 6cm Platz zu anderen Objekten, z.B.
Einrichten Ihres All-in-one PC Anschluss einer Tastatur und einer Maus Verbinden Sie die Tastatur mit dem USB-Port an der Geräterückseite ( 1 ). Alternativ �������������������������������������� können Sie die Tastatur an den USB-Anschluss auf der linken Seite anschließen, sofern das Tastaturkabel lang genug ist.����������������������������� Verbinden Sie dann auch die Maus mit dem USB-Port an der Rückseite ( 2 ). 1 2 Anschluss einer drahtlosen Tastatur und Maus 1. 2. 3. 4.
Einschalten des Systems Schließen Sie das mitgelieferte Netzteil an die DC IN-Buchse an der Geräterückseite ( 1 2 3 ) an und drücken Sie die Stromtaste an der rechten Seite ( 4 ), um das System einzuschalten. 2 3 1 WARNUNG! SChließen Sie das ACNetzkabel KEINESFALLS an eine ACSteckdose an, bevor Sie den DC-Stecker mit dem System verbunden haben. Andernfalls kann das AC-DC-Netzteil Schaden nehmen.
Konfigurieren der Wireless-Verbindung 1. Klicken Sie im Windows®-Infobereich auf das Netzwerk-Symbol . 2. Wählen Sie das Drahtlosnetzwerk, mit welchen Sie sich verbinden wollen, aus der Liste aus und klicken Sie auf Verbinden. Geben Sie bei Verbindung mit einem geschützten Netzwerk den Netzwerksicherheitsschlüssel ein. 28 3. Nachdem die Verbindung hergestellt wurde, wird diese in der Liste angezeigt. 4. Sie sehen nun das Wireless-Netzwerksymbol All-in-one PC ET2411/ET2210 Serie in der Taskleiste.
Konfigurieren der Kabelnetzwerkverbindung Verwenden einer statischen IP 1. Klicken Sie in der Taskleiste auf das Netzwerksymbol mit den gelben Warndreieck und wählen Sie Netzwerk- und Freigabecenter öffnen. Vergewissern Sie sich, dass Sie an Ihren EeeTop PC ein LAN-Kabel angeschlossen haben. 2. Klicken Sie in der linken Spalte auf Adaptereinstellungen ändern. 3. Rechtsklicken Sie auf Local Area Connection und wählen Sie Eigenschaften.
4. Klicken Sie auf Internet Protocol Version 4(TCP/IPv4) und dann auf Eigenschaften. 5. Wählen Sie Folgende IP-Adresse verwenden. Geben Sie Ihre IP-Adresse, Subnetzmaske und den Standardgateway. Wenn benötigt, geben Sie den Bevorzugten DNS-Server ein. Nach der Eingabe aller Daten klicken Sie auf OK, um die Konfiguration zu beenden. 6. 7. 8.
Verwenden einer dynamischen IP (PPPoE) 1. 2 Wiederholen Sie die Schritte 1-4 des vorherigen Abschnittes. Wählen Sie IP-Adresse automatisch beziehen und klicken Sie dann auf OK. (Fahren Sie mit den folgenden Schritten fort, wenn Sie PPPoE verwenden) 3. Kehren Sie zurück zu Netwerk- und Freigabecenter und klicken Sie dann auf Neue Verbindung oder Netztwerk einrichten. 4. Wählen Sie Mit dem Internet verbinden und klicken Sie dann auf Weiter.
5. Wählen Sie Breitband (PPPoE) und klicken Sie dann auf Weiter. 6. Geben Sie Ihren Benutzernamen, das Kennwort und den Verbindungsnamen ein. Klicken Sie auf Verbinden. 7. Klicken Sie auf Schließen, um die Konfiguration zu beenden.
8. Klicken Sie auf das Netzwerksymbol in der Taskleiste und dann auf die Verbindung die Sie gerade erstellt haben. 9. Geben Sie Ihren Benutzernamen und das Kennwort ein. Klicken Sie auf Verbinden, um die Verbindung mit dem Internet herzustellen.
Anschluss externer Audio-Geräte Der All-in-one PC unterstützt verschiedene Arten der Audio-Konfigurationen. Sie können das System einrichten, um Stereolautsprecher zu verwenden. Die folgende Tabelle macht Sie mit den Audio-Anschlüssen vertraut. Audio-Buchsen Beschreibung Audio-Ausgang; Anschluss für Kopfhörer.
2. Wählen Sie ein Wiedergabegerät, klicken Sie zum Konfigurieren der Einstellungen auf Eigenschaften. 3. Nehmen Sie erweiterte Konfigurationen vor (z. B. Anpassung der Lautsprecherstufe und Ausgaberate). Klicken Sie zum Abschluss der Konfiguration auf OK.
System wiederherstellen Benutzung der versteckten Partition Die Wiederherstellungs-Partition enthält ein Image (Abbild) des Betriebssystems, der Treiber und der vom Hersteller in Ihren System installierten Programme. Die WiederherstellungsPartition bietet somit eine umfangreiche Wiederherstellungslösung, die Ihre Systemsoftware schnell in den originalen Arbeitszustand zurück versetzt und Ihre Festplatte in ordnungsgemäßem Betriebszustand hält.
5. Basierend auf den verschiedenen Situationen der vorhergegangenen Schritte, werden die Daten auf dem gewählten USB-Datenträger oder der gewählten Partition gelöscht. Klicken Sie auf Backup, um die Sicherung zu beginnen Sie werden alle Daten auf dem gewählten USB-Datenträger oder der gewählten Partition verlieren. Vergewissern Sie sich, dass Sie wichtige Daten vorher gesichert haben. 6.
Hersteller ASUSTek COMPUTER INC. Adresse, Stadt No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C Land TAIWAN Authorisierte Niederlassung in Europe ASUS COMPUTER GmbH 38 Adresse, Stadt HARKORT STR.